Professional Documents
Culture Documents
Manejo Monitor D65
Manejo Monitor D65
- Moves Left
- Moves Right
- Selects Mode
ν - Cancels Mode
Normal
Normal Monitor
Monitor Display
Display Key
Key "ON"
"ON"
select YES or NO
- PM Clinic Functions -
•Stop! Call your Komatsu dealer Select and hold “H” Cancel hold ν Exit function
- Error Code Functions -
If a problem is detected in the operating systems, the monitor read-out will display one of two
indications. These would be a display with the words “!!ERROR CODE!! This is usually followed
by an audible warning as well as a separate indication elsewhere. The other display would be the
actual “FAULT CODE” display listing for the system with a problem. This is usually indicated by
a six digit display specifically for the system with the problem. The monitor is capable of sorting
E03 3Action code is displayed 20 items, each will be displayed automatically every two seconds in the order of occurrence.
Contents of Fault:
•Engine coolant sensor is defective
•Gear speeds are limited
•Rough gear shifting
•Slow steering response
•Lack of brake control
Remedy:
•Move to a safe location and shut
machine down immediately
•Stop ! Call your Komatsu dealer
ν or Increase intensity
No action No action
EMMS: Equipment Management Monitoring System
- Moves Left
- Moves Right
- Selects Mode
ν - Cancels Mode
Normal
Normal Monitor
Monitor Display
Display Key
Key "ON"
"ON"
ν or
Move Left Move Right Set values at zero, maintenance alert will not be
used and no warning will be set in system
No setting ν or
Setting Numbers
“UP”
(increase numbers)
“DOWN”
(decrease numbers)
ν
Items marked with a star can be displayed using the < or > feature.
Moves cursor
ν
Setting Numbers
“UP”
(increase numbers) See Monitoring Mode Table for a list of system codes
By using the select mode function you can capture and hold a
In this mode you can read a systems function time frame within a systems. An “H” will appear on the left of the
by simply entering an access code. Once in the system screen and all monitored movement will hold until canceled.
you can scroll through other systems.
Select and hold “H” Cancel hold Exit function ν
ν
Setting Numbers
“UP”
(increase numbers)
See Monitoring Mode Table for a list of system codes