Auto 107 Gypsy Street,
7 2 DESIGN DATA
Avia Design BANKSTOWN AIRPORT
Ph (02) 97910164 Fax (02) 9791 0175 Mob 0413 448 890 RELEASE
REF. NUMBER | 203/658/DR RAISED: J. Stannard DATE: 19/09/2003
ISSUE 1 [x [x [x [x [arro: 0 simone | bare: 0ar00s
issuepate |1.19092003 2 =x 3 x 4 x 5 x
ISSUE CHANGE NOTES:
Issue 1 - Ina Issue
approval autHoRITY | NT | x | ext cAA OTHER
DATA RELEASED BY THIS DESIGN RELEASE
‘Auto Avia Design Pty Ltd Engineering Instruction 203/65@/EI1 Issue 1
‘TASK DESCRIPTION
APPROVAL OF CUSHION ATTACHMENT SERVICE BULLETIN
DATA APPROVAL STATUS
QUOTATION ONLY APPROVED [XI NoT APPROVED
PROVISIONAL APPROVAL [ J PRELIMINARY [ } INFORMATION ONLY {]
PENDING: DATA REVISION PROVIDED YES 1 NO pq
OTHER DOCUMENT ACTION
MAINT. MANUAL YEST] NO px FLIGHT MANUAL YES] NO Dg
WEIGHT CONTROL YES } NO (x) PARTS MANUAL YES[] NOX]
OTHER: LOG BOOKIMAINT. REC YES (x) NOT ]
TYPE OR PRODUCT | asaso
REGISTRATIONS APPLICABLE He SW, SWX,TMY
PART NUMBER APPLICABLE NA
SERIAL NUMBERS APPLICABLE 9059, 9053, 3646
DISPOSITION OF DATA APPROVAL STAMP VALID ONLY IN RED
AUTO AVIA DESIGN PTY LTD
A "ATE OF APPROVAL-OESIGN
COPY 1 AUTO AVIA DESIGN PIL. EASA GERTCATE OF A
COPY 2 AUSTRALIAN AEROSPACE (QLD) Approved Pers
cory s Signator .
For AUTO AVIA DESIGN PTY LTD
NOTES: 7 ssoAUTO ENGINEERING INSTRUCTION SHEET
AVIA DESIGN Page 1 of 2
NUMBER: 203/658/E11 ISSUE: 1 AIC TYPE: _AS350
RAISED BY: J, Stannard REG: Refer DDR
APPROVED BY: D. Simons DWG No: Nene
DATE: 19" September, 2003 REPORT No: _ None
CLIENT: Australian Aerospace
REQUIREMENT FOR ENGINEERING INSTRUCTION:
APPROVAL OF CUSHION ATTACHMENT SERVICE BULLETIN
FOR APPROVAL STATUS & APPICABLITY OF
THIS DATA, REFER TO DATA RELEASE
205 /658/DR, ISSUE 4
Details
1. Reference Documents
+ Eurocopter AS350 Service Bulletin No. 25.30 “Rear Bench-Seat
Reinforcement of Cushion Attachment’
‘+ CASA Airworthiness Directive No, AD/ECUREUIL/67 “Rear Bench
Cushions”,
2. Background
CASA AD/ERUCEUIL/67 mandates the removal of any unoccupied rear
bench seat cuhions during fight with doors open or removed, unless the seat
cushions are restrained by mechanical means approved in accordance with
CAR 35 in addition to the existing Veloro method,
Eurocopter AS350 Service Bulletin No. 25.30 details the addition of a strap
on the rear of the backrest, which passes through a loop on the seat cushion,
and attaches below the bench-seat by an eye-end and widening of the
“VELCRO” strips on the rear bench seat. As this Service Bulletin is not
CAR35 approved, it does not strictly meet the requirements of the AD. The
Purpose of this Engineering Instruction sheet is to CAR3S approve the
Eurocopter AS360 Service Bulletin No. 25.30.
3. Procedure
1. Carry out the procedures specified in Eurocopter AS350 Service Bulletin No.
25.30,
4. Further Maintenance Action
As per instructions for Eurocopter AS350 Service Bulletin No. 25.30.
5. Weight and Balance Effect
Negligible Change.AUTO ENGINEERING INSTRUCTION SHEET,
AVIA DESIGN Page 2 of 2
NUMBER: 203/658/E11 ISSUE: 1 AIC TYPE: _AS350
RAISED BY: _ J. Stannard REG: Refer DDR
[APPROVED BY: D. Simons DWGNo: None
DATE: 19" September, 2003, REPORT No:_None
‘CLIENT: Australian Aerospace
REQUIREMENT FOR ENGINEERING INSTRUCTION:
APPROVAL OF CUSHION ATTACHMENT SERVICE BULLETIN
6. Other Document Action
Aircraft maintenance log book to be amended to record installation of
mechanical seat cushion attachment in accordance with Auto Avia Design
Engineering Instruction 203/658/E!1 Issue 1 and Eurocopter AS350 Service
Bulletin No. 25.30.