Professional Documents
Culture Documents
Calculations: Project: of Section: File/ref No: Designed: Date: Checked: Date
Calculations: Project: of Section: File/ref No: Designed: Date: Checked: Date
Calculations: Project: of Section: File/ref No: Designed: Date: Checked: Date
project: page of
designed: date:
checked: date:
calculations
project: page of
designed: date:
checked: date:
Maunsell
JOB No. SHEET No.
BY DATE
CHECKED DATE
BEAM MARK :
0 0.00 kNm 0
0 0.00 mm2 0 12 mm
0 0.00 mm2 0 2
CRACK WIDTH Wcr = 0.101 mm < 0.30 mm Max. crack OK ! ACI 318M-95, Sec. R10.6.4
Spacing of reinf't. closest to a surface in tension, S = 109.17 mm NOT OK! ACI 318-99, Sec.10.6.4
7 -f 25
0 0 0
SUMMARY
2 -f 12
J:\Temp\Spreadsheet\584585288.xls
Y
use minimum shear spacing!
J:\Temp\Spreadsheet\584585288.xls
calculations
project: page of
section: file/ref no:
designed: date:
checked: date:
BEAM MARK :
0 0.00 kNm 0
0 0.00 mm2 0 12 mm
0 0.00 mm2 0 2
CRACK WIDTH Wcr = 0.197 mm < 0.30 mm Max. crack OK ! ACI 318M-95, Sec. R10.6.4
Spacing of reinf't. closest to a surface in tension, S = 50.00 mm NOT OK! ACI 318-99, Sec.10.6.4
5 -f 20
5 -f 20
SUMMARY
2 -f 12
J:\Temp\Spreadsheet\584585288.xls
use minimum shear spacing!
J:\Temp\Spreadsheet\584585288.xls