Professional Documents
Culture Documents
Ground - Support - Shaft and Vent Alimak - 2 - v6 - No Oficial-Alimak Pilot 2.1m
Ground - Support - Shaft and Vent Alimak - 2 - v6 - No Oficial-Alimak Pilot 2.1m
Wire mesh
GROUND_SUPPORT_VENT RAISE
1. Complete all the raise with wire mesh rebars and
split set bolts of 1.5m (as per standar)
2. Prior to connect, last round need release drilled, this
in order to reduce overbreack
3. Wire mesh need to be extend to cable bolts installed.
4. Split set need to pin wire on the collar, as dice
pattern.
5. 4" shotcrete needed to reinforce the collar
6. 3" Shotcrete support all the way of the raise.