Professional Documents
Culture Documents
Product End of Life Instructions: Easergy Cl110
Product End of Life Instructions: Easergy Cl110
ENVEOLI1707002_V1 07/2017
ENVEOLI1707002_V1 - End of Life Instructions - EASERGY CL110
The components of the product that optimize the recycling performances are listed, identified and located
hereunder.
There are several steps to process the products at the end of life so as to recover components, materials or energy :
ENVEOLI1707002_V1 07/2017
ENVEOLI1707002_V1 - End of Life Instructions - EASERGY CL110
Product description
Manufacturer identification Schneider Electric Industries SAS
Brand name Schneider Electric
The Easergy CL110 is a battery powered thermal and humidity sensors fitted with wireless
Product function communication sensor using Zigbee Greenpower 2.4GHz protocol according to the IEEE
802.15.4. The Easergy CL110 is a mobile device as defined by FCC.
Product reference EMS59443
Total representative product mass 80 g
Additional information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
Legal information legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
Recyclability potential 19% 20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
www.schneider-electric.com
ENVEOLI1707002_V1 © 2016 - Schneider Electric – All rights reserved
07/2017
Published by Schneider Electric
ENVEOLI1707002_V1 07/2017