Professional Documents
Culture Documents
Semisel - Simulation Software
Semisel - Simulation Software
Step By Step Design Ready Assembled Stack Device Proposal Driver Select Tool Version 4.3.1 23/06/2019 User: Guest
Semisel >> Simulation
Survey
Dear user,
We would like to improve our online calculation and simulation tool "SemiSel".
To achieve this goal we would like to invite you to give us your feedback in a short (3-5 minutes) online survey.
In the anonymous survey no personal data (name, IP address etc.) is requested or stored.
Start survey
Project:
Topology DC/DC
Circuit Buck
Circuit:
Vin 534.34 V
Iin 4.90A
fsw 10kHz
Duty Cycle 0.366(x100%)
Vout 195.529V
Iout 13.26A
ton fwd 0.158
Overload factor 1
Overload duration 10s
Device :
Product line SEMITRANS
Device SKM600GB066D
Use maximum values No
Max. junction temparature 175
Transistor Diode
Etr = 37 mJ (@300V) Ed = 25 mJ
VCE0.150 = 0.82 V VT0.150 = 0.87 V
rC.150 = 1.34 mOhm rT.150 = 0.95 mOhm
VCE.sat = 1.62 V Vf = 1.44 V
Ic = 600.00 A If = 600.00 A
Rth(j-c) = 0.08 K/W Rth(j-c) = 0.125 K/W
Rth(c-s) = 0.038 K/W
* - soft turn-off in case of short circuit necessary
Data set from 2013/08/25
Cooling:
Ambient temperature 40 °C
Number of switches per heat sink 1
Number of parallel devices on the same heat sink 1
Additional power source at this heat sink 0
Predefined SK-Heat Sink P14_120
Correction factor 1
Forced Air Cooling, Flow Rate: 85m3/h
Rth(s-a) 0.110K/W
semisel.semikron.com/DCDCResult.asp 1/2
22/6/2019 SEMIKRON / SemiSel 4.3.1
Evaluation:
Additional Characteristics at given nominal operation conditions with one free parameter - X:
None selected
Note
1) SKYPER 32 R with external boost capacitors
semisel.semikron.com/DCDCResult.asp 2/2