Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Product Specifications

E14F05P16
Twin Diplexer, 1695-2180/2300-2600 MHz, dc bypass all ports, 4.3-10 connectors
l New 4.3-10 connectors for improved PIM performance and size reduction

l Twin configuration

l Industry leading PIM performance

l dc/AISG pass-through on all frequency ports

General Specifications
Product Type Diplexer
Product Family CBC1726
Modularity 2-Twin
Includes Mounting hardware

Electrical Specifications
Sub-module 1|2 1|2
Branch 1 2
Port Designation 1695-2180 2300-2690
AWS 1700
DCS 1800 IMT 2600
License Band
IMT 2100 WCS 2300
PCS 1900

Electrical Specifications, Band Pass


Frequency Range 1695–2180 MHz 2300–2690 MHz
Insertion Loss, typical 0.20 dB 0.20 dB
Total Group Delay, maximum 30 ns 30 ns
Return Loss, typical 20 dB 20 dB
Isolation, minimum 50 dB 50 dB
Input Power, RMS, maximum 300 W 300 W
Input Power, PEP, maximum 3500 W 3500 W
3rd Order PIM, typical -160 dBc -160 dBc
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

dc Power/Alarm Electrical Specifications


dc/AISG Pass-through Path Branch 1 | Branch 2
dc/AISG Pass-through, combiner Branch 1 | Branch 2
Lightning Surge Current 3 kA
Lightning Surge Current Waveform 8/20 waveform

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 5, 2017 December 14, 2017
Product Specifications
E14F05P16

Block Diagram

Mechanical Specifications
RF Connector Interface 4.3-10 Female
Ground Screw Diameter 6.00 mm
Color Gray
Mount Type Pole | Wall
Mounting Pipe Diameter 42.6–122 mm
Mounting Pipe Hardware Band clamps (2)

Dimensions
Height 152.2 mm | 6.0 in
Width 123.0 mm | 4.8 in
Depth 119.0 mm | 4.7 in
Volume 2.3 L
Weight 3.8 kg | 8.4 lb

Environmental Specifications
Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
Relative Humidity Up to 100%
Ingress Protection Test Method IEC 60529:2001, IP67

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 5, 2017 December 14, 2017
Product Specifications
E14F05P16

Outline Drawing

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 5, 2017 December 14, 2017

You might also like