Professional Documents
Culture Documents
How To Download Firmware and Parameter&Language File
How To Download Firmware and Parameter&Language File
How To Download Firmware and Parameter&Language File
_________________________________________________________________________________
Xc2003 Instruction
_________________________________________________________________________________
The ‘zippi’ extension of this file needs to be renamed into a ‘zip’ extension:
Under the root folder (in shown case, under XC2003_0_0_2760_test_autoupd), there is an “autoupd’ folder:
Now your Firmware USB Stick is ready, and ready for use.
Insert the Firmware USB Stick into the USB port of the Xc2003.
Wait until this view pops-up (this can take about 30s.):
_________________________________________________________________________________
Now the Xc2003 is updating the Firmware. DO NOT POWER DOWN the Xc2003 during Firmware update.
When the Xc2003 shows ‘Update is Complete’, press the power button to power-down the Xc2003:
Remove the Firmware USB Stick from the Xc2003 USB port.
_________________________________________________________________________________
Copy these four files to the root of Service Level Hardware USB Key
Now, your USB Stick contains following files:
Now your Parameter&Language file USB Stick is ready, and ready for use.
Insert the Parameter and Language File USB Stick into the USB port of the Xc2003.
_________________________________________________________________________________
Scroll to, and Enter ‘Restore Parameters and GUI File from USB’
Press Enter to confirm ‘Restore Parameters and GUI File from USB?’
Now the Parameter and Language File at your USB Stick is copied into the Xc2003.
_________________________________________________________________________________