67-18
im
pa
~
3. Pitch of Cross Bars
Pitch means the distance center to center of each cross
bar. The pitch is 4" for every type. The distance from the ouler
fend of the bearing bar to the nex! cross bar is 2".
"J euros | Lex |
bee fou
4. Pitch of Bearing Bars
The pitch is the distance from center to center of each
bearing bar. The pitch is 1-9/16" whether the thickness of the
bearing bar is 3/16" or 1
PITCH.
13/16
5. Width & Length of the Gratings
No matter what size of grating it may be, the direction in
which the bearing bars run is referred to as the length, and
direction in which the cross bars run is referred to as the width.
Most common plain style sizes are as follows and are
available as ready made stock.
How to order: CODE
Grating, plain style, galvanized iron,
SIZE, PITCH of bearing bar and cross
bar
Unt Per Pe.
Bearing Bar ‘Cross Bar
cove | sie | Finish
glel s | = Ig
3|3| 8 8
Zia) @ | é le
6798 01/2 x20
x20 Galva.
02/228 | se} a arte: ;
82) 5 228 | ve] | ate | ves a |rzes
04] x28 |
Besides the above sizes, a wide variety of sizes are
available. When ordering, please specity the following
points to avoid errors and delays.
INTERNATIONAL MARINE
PURCHASING ASSOCIATION
Type of Grating
Size of Bearing Bar
Dimensions (Wiath x Length)
Number of Gratings
Standard Finish (unpainted, gray primary coated, black
primary coated of galvanized)
Fiber Reinforced Plastic Grating
(FRP Grating)
Rejila Plistica Reforzada con Fibra (Enrejados ERP)
DIAN-SU-F YY BAR
Designed to meet the
standards of harsh marine
environments and suitable
for varied applications such
as electrical control ooring,
platforms, catwalks, bilges,
and drain troughs,
‘Made of a non-wear
synthetic polyester resin
which is resistant to salt
water corrosion and will
withstand contact with acid or industrial chemicals. Although
FRP grating is much lighier and easier to handle than metal
gratings (18.5), when compared with iron and aluminium on a
scale o strength, iron is about 5.4, aluminium is 7, and FAP is
15. This grating is very easy to work with and install wherever
itis required, whether inthe engine room, on staircases, or on
walkways on deck. FRP is ind'spensable on tankers because
itis anon spar, inflammable surface which can be used in
situations where it undergoes continual friction with metal
surfaces.
FRP has no magnetic properties and will not conduct
elect
Will be supplied in gray unless otherwise specified
‘Square Meshbe
67-19
PROFESSIONALISM GIVES - QUALITY - SAVES COSTS
How to order : CODE
Grating, square mesh,
W 2,967 x L 967 x H 40 mm,
MATERIAL, FEATURE
Unit Per Sht.
cope
Material
Synthetic |
Polyestor
Resin
Synthetic
67 38 12 | Poiyester
Resin
Epoxy
Aeryite
Resn
Features
Fire Resistant
‘Chemical resistant
Sparkless. -
‘Chemical resistani/
Sparkles. 53
ean
‘Chemical resistant?
Spackless/Acid, 53
Alkali resistant
673813,
When ordering, please specify the material and size you
require, If no specific size is necessary, It is suggested that you,
coder the grating by sheet.
Rectangle Mesh
How to order : CODE
Grating, rectangle mesh,
W 3,007 x L 1,007 x H.25 mm,
MATERIAL, FEATURE
——— rit Bt Si
CODE | Materiat | Features
io ‘Synthetic | Fire Resistant
67 28.15 | Polyester | Chemicalresistant’ | 25 | 145
Resin | Sparkiess
Synthaic | Chemical resistant!
67 36 16 | Polyester | Sparkles a | 118
Resin —
Epoxy | Chemical resistant!
67 3817 | Acryiate | Sparkiess/Acid, 18
Resin | Alkal sistant
‘When ordering, please specify the material and size you
require. itna specific size is necessary, itis suggested that you
order the grating by sheet.
|
|
Gauze Wire
Tela Metalica
aR Me
Available
4) Galvanized iron
2) Brass — Copper
3) Nylon
4) Plastic Coated Iron
5) Bronze
6) Stainless Steel,
axa
Mesh
Per
Lineor Inet
ne
Mesh denotes the number of openings horizontally and
vertically per linear inch. tis measured from center to center
of the parallel wires, as illustrated above.
Actual Square Meshes
at;
supe
10x10
20x20
60x60
‘When in doubt about the correct wire size and mesh, the
safest and surest way is to send a cut sample of the gauze
loth required and indicate its proposed use in advance. The
standard width of stainless steel gauze wire is 1,000 mm and
‘or other materials the width is 810mm, all supplied in varying
lengins.
How to order: 67-39-
Gauze wire, for PROPOSED USE
MATERIAL - MESH ~ WIDTH
and LENGTH
dle