This job safety analysis document outlines safety procedures for working with or moving equipment near overhead electrical power lines. It identifies electrical shock as a hazard and specifies safe distance requirements based on voltage levels that must be maintained to prevent electrical shock. Supervisors and workers are responsible for knowing the location and voltage of overhead lines and maintaining the specified safe distances. If the safe distance may not be maintained, an observer must be present to communicate with the operator.
This job safety analysis document outlines safety procedures for working with or moving equipment near overhead electrical power lines. It identifies electrical shock as a hazard and specifies safe distance requirements based on voltage levels that must be maintained to prevent electrical shock. Supervisors and workers are responsible for knowing the location and voltage of overhead lines and maintaining the specified safe distances. If the safe distance may not be maintained, an observer must be present to communicate with the operator.
This job safety analysis document outlines safety procedures for working with or moving equipment near overhead electrical power lines. It identifies electrical shock as a hazard and specifies safe distance requirements based on voltage levels that must be maintained to prevent electrical shock. Supervisors and workers are responsible for knowing the location and voltage of overhead lines and maintaining the specified safe distances. If the safe distance may not be maintained, an observer must be present to communicate with the operator.
Moving equipment Electrical shock KNOW THE LOCATION OF ALL ELECTRICAL SUPERVISORS under electrical OVERHEAD POWER LINES WORKERS power lines KNOW THE VOLTAGE OF ELECTRICAL OVERHEAD POWER LINES
MUST MAINTAIN A SAFE DISTANCE WHILE
TRAVELING UNDER ELECTRICAL POWER LINES
OVER 750 V TO 75kV - 6.5 FEET
OVER 75kV TO 250kV - 10 FEET OVER 250kV TO 550kV - 13 FEET
IF THERE IS A POSSIBILITY THAT A SAFE
DISTANCE MAY NOT BE MAINTAINED AN EMPLOYEE ON THE GROUND MUST BE IN A LOCATION TO OBSERVE AND COMMUNICATE WITH THE OPERATOR. Equipment working Electrical shock KNOW THE LOCATION OF ALL ELECTRICAL SUPERVISORS under electrical OVERHEAD POWER LINES WORKERS power lines KNOW THE VOLTAGE OF ELECTRICAL OVERHEAD POWER LINES
MUST MAINTAIN A SAFE DISTANCE WHILE
WORKING UNDER ELECTRICAL POWER LINESOVER
OVER 750 V TO 75kV - 10 FEET
OVER 75kV TO 250kV - 15 FEET OVER 250kV TO 550kV - 20 FEET
IF THERE IS A POSSIBILITY THAT A SAFE
DISTANCE MAY NOT BE MAINTAINED AN EMPLOYEE ON THE GROUND MUST BE IN A LOCATION TO OBSERVE AND COMMUNICATE WITH THE OPERATOR.