Professional Documents
Culture Documents
VSP152valretencao 20150328135325
VSP152valretencao 20150328135325
VSP152valretencao 20150328135325
SBM technology
40 bar check valve
G 1/4 ... G 1 1/4
Technical features
Medium: Maintenance free life time: Fluid/Ambient temperature: Materials
Compressed air, 40 μm filtered, Typically exceeds 25 +10 ... +50°C max. (Ambient) Housing and covers: Aluminium
non-lubricated Million cycles 0 ... +50°C max. (Fluid) anodised
Pre-lubrication of the static Operating pressure: Air supply must be dry enough Valve piston: FDA compliant
sealing: 3 ... 40 bar to avoid ice formation at synthetic material
USDA H1 compliant Port size: temperatures below +2°C O-ring: NBR
(registered NSF class H1) G 1/4 ... G 1 1/4
Operation: Mounting:
Check Valve (no spring) Line mounted
4/13 Our policy is one of continued research and development. We therefore reserve the right to amend, N/en 5.10.363.01
without notice, the specifications given in this document.
VSP152...
Dimensions
G1/4 & G3/8
1 2
B
B
D
G1/2 ... G1 1/4
C
1 2
B
Warning
These products are intended for use in industrial compressed air The system designer is warned to consider the failure modes
systems only. Do not use these products where pressures and of all component parts used in pneumatic systems and to provide
temperatures can exceed those listed under »Technical features«. adequate safeguards to prevent personal injury or damage to
equipment in the event of such failure.
Before using these products with fluids other than those specified, System designers must provide a warning to end users in
for non-industrial applications, life-support systems, or other ap- the system instructional manual if protection against
plications not within published specifications, consult NORGREN. a failure mode cannot be adequately provided.
System designers and end users are cautioned to review specific
Through misuse, age, or malfunction, components used in warnings found in instruction sheets packed and shipped with
fluid power systems can fail in various modes. these products.
N/en 5.10.363.02 Our policy is one of continued research and development. We therefore reserve the right to amend, 4/13
without notice, the specifications given in this document.