Professional Documents
Culture Documents
KSW 626 - Data Sheet and Loesche Certification
KSW 626 - Data Sheet and Loesche Certification
DESCRIPTION A self shielded high carbon high chromium flux cored wire designed specially for
extreme gouging abrasion conditions. The weld deposit is primarily used for hard
facing components subjected to extreme abrasion/erosion under moderate/heavy
impact loads. The weld deposit contains a high proportion of hard primary chromium
carbides in a tough martensitic-secondary carbide eutectic matrix. The weld deposit
is non machinable.
PACKING 12.5kgs spool sealed in polythene bag and shrink wrapped in a corrugated box.
2.4 and 2.8mm wires are available in 250kgs drum for automatic welding.
APPLICATIONS Wornout Ni-Hard and high chromium crusher rolls, table liners, tyres… etc.
for coal mill in thermal power station and crushing mill in cement plants.
Gyratory crusher cones and mantles, catalyst pipes and bends, slurry pipes
and valve bodies, dredge pump bodies, extruder screws, mining and
earthmoving equipment, blast furnace bells, coal pulveriser rolls, crusher
hammers, shovel edges wear plates.... etc.
8 Test area
Ultraschallpn¡fung :
für Bereich
SONIC ULTRATESÍ:
FORT}IE AREA
Oberflächenrisspnifu ng :
für Bereich
SURFACE CRAGKTEST:
FORTHE AREA
9 Documentation
The supplier must fonruard to LOESCHE - without having to be prompted to do so - the product
information for the relevant materials used
l0 Approved products
PageS/5