Professional Documents
Culture Documents
3015CNR地基图 三米旋转轴
3015CNR地基图 三米旋转轴
3015CNR地基图 三米旋转轴
地脚板 4- 14 300
Base anchor 240
最小距离500
墙体 1289
300
240
Wall
厚20mmQ235A板
20mm Q235A thick steel plate
700
共10件
4480
Total 10 items
854.5 1032.5 1032.5 1032.5 后床身地脚板 4- 14 250
200
Base anchor of back bed
250
200
3756
共8件 厚20mmQ235A板
3056
20mm Q235A thick steel plate
2830
Total 8 items
2275
1840
操作区
331
Operation area
520
最小距离800
Minimum distance 800
1.先做好地脚板,尺寸如右上图所示;
1.Making the base anchors,refer to the picture for size;
2.地脚板用膨胀螺栓固定在水泥地面上,膨胀螺栓规格:M12*100,数量:72件;
地脚板
2.Fixing the base anchor to cement flooring with expansion bolt,expansion bolt:M12*100,NOS:72; Base anchor
3.将机床放在地脚板合适的位置上,将机床和地脚板焊接在一起;
3.Putting the machine on the right place of base anchor then welding it;
4.原则上要求机床10块地脚板对应浇注400*400*600深的水泥柱,再将固定板固定于水泥面上,如
果水泥面强度足够,可直接在水泥面上装地脚板作为地基。
计划号 LF-3015CNR 图 号 3015CNR地基图+三米旋转轴
4.In theory,it need to pour concrete column(size:400*400*600)for all the ten base anchors, 设 计 PRO. NO.
2019/1/21
3015CNR地基图 项 目 激光切割机
DRAFT NO.
then fix the plate to cement flooring.If the cement surface is strong enough can using it as 审 核 DES. BY
CHECKED
二次处理 比 例 1:35 济南金威刻科技发展有限公司
DESCRIPTION SCALE
PRO. NAME
foundation directly. 批 准
APPROVED
材 料 装配体 重 量3744660.73 Jinan GWEIKE Technology Development Co., Ltd
MATERIAL WEIGHT