Professional Documents
Culture Documents
Slicing A .STL File in Cura With Suitable Parameters and 3D Printing Using The FDM Process
Slicing A .STL File in Cura With Suitable Parameters and 3D Printing Using The FDM Process
ID NO-2100030703
Slicing a .stl file in Cura with suitable parameters and 3D printing using the FDM
process
Aim:
Software Requirements:
Procedure:
Step 3: upload the stl file in ultimaker cura for checking the remaining parameters.
Step 4: check the parameters like temperature, bed heating, raft for the base and the
measurements of the model and finally check the silicing time.
Step 5: After setting the sutiable parameters for 3D printing convert the stl file into g codes
Which should be for printing the model.
Step 8: Start printing the model by giving the parameters in the software and transfer to the
machine.
Cura Parameters:
EXPERIMENT REPORT
(All steps clearly stated)
OBSERVATIONS AND DATA 15
TOTAL 20