Professional Documents
Culture Documents
Practice Book TCIL IT-GTech
Practice Book TCIL IT-GTech
Contact No.:
Email :
TCIL-IT EDUCATION & TRAINING
A GOVERNMENT OF INDIA ENTERPRISES, PUNE
Central Government
ISO Certied Certication
Learn job oriented training programs with TCIL-IT and design your career!
TCIL-IT Education and Training A Govt. of India Enterprise offers you Post Graduate Diploma Programmes
SSUR
A • P. G. Dip. in CAD/CAM/CAE
the ISO certified professional training programs:
A
NCE
JOB
Learn Master Diploma and Professional programs in: 100% • P. G. Dip. in Product Design and Manufacturing
Master Programmes
• Master Certificate in CAD/CAM/CAE
• Master Certificate in Computer Aided Tool Engg.
Diploma Programmes
• Diploma in Mechanical CAD • Diploma in CAM • Diploma in CAE
Short - Term Programmes
Shivajinagar Pune: • Auto CAD • CREO • Solid Works • CATIA • UG NX • Ansys
364/365, 1st Floor, Above Bank of Maharashtra, Shivaji Nagar, Pune -411005
Mob.: 9975907923, 9970720023 E-mail : tcilitpune2@gmail.com • Business communication & Organizational skills
Visit us at : www.tciliteducation.com
Sketcher
3
Part model
4
5
GRAPHIX
TECHNOLOGIES
6
GRAPHIX
TECHNOLOGIES
7
GRAPHIX
TECHNOLOGIES
8
GRAPHIX
TECHNOLOGIES
9
GRAPHIX
TECHNOLOGIES
10
GRAPHIX
TECHNOLOGIES
11
GRAPHIX
TECHNOLOGIES
12
GRAPHIX
TECHNOLOGIES
13
GRAPHIX
TECHNOLOGIES
FIG. 4.45
FIG. 4.46
14
GRAPHIX
TECHNOLOGIES
15
GRAPHIX
TECHNOLOGIES
16
GRAPHIX
TECHNOLOGIES
17
GRAPHIX
TECHNOLOGIES
18
GRAPHIX
TECHNOLOGIES
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
41
42
43
Crosshead Assembly
In this project, you will create all components of the Crosshead assembly and then assemble them, as shown in GRAPHIX
TECHNOLOGIES
Figure 1. Also you will create an exploded state, shown in Figure 2. The dimensions of the components are shown in
Figures 3 through 7.
Figure 1 The Crosshead assembly Figure 2 The exploded state of Crosshead assembly
Figure 3 Front view and the right-side view of the Body
Figure 5 Dimensions of Piston Rod Figure 6 Dimensions of the Brasses and Bolt
44
Fixture Assembly
Create all the components of the Fixture assembly and then assemble them, as shown in Figure 1. The details of the GRAPHIX
TECHNOLOGIES
components of the Fixture assembly are shown in Figures 2 through 5.
Figure 1 The Fixture assembly Figure 2 Dimensions of the End Plate Figure 3 Dimensions of the Disk
Figure 4 Dimensions of the Support Pin and the Bolt Figure 5 Dimensions of the Spacer, Center Pin,
and the Nut
45
Pipe Vice Assembly
In this Project, you will create all components of the Pipe Vice assembly, as shown in Figure 1, and then assemble GRAPHIX
TECHNOLOGIES
them. The dimensions of the components are given in Figures 2 and 3.
Figure 2 Views and dimensions of the Base Figure 3 Views and dimensions of the Screw,
Handle, Movable Jaw, and Handle Screw
46
Plummer Block Assembly
In this project, you will create the components of the Plummer Block assembly, as shown in Figure 1 and then GRAPHIX
TECHNOLOGIES
assemble them. The dimensions of the components are given in Figures 2 through 4.
Figure 3 Views and dimensions of the Cap Figure 4 Views and dimensions
of Brasses, Nut, Lock Nut, and Bolt
47
Press Tool Assembly
In this project, you will create the Press Tool assembly shown in Figure 1. The exploded state of the assembly is shown GRAPHIX
TECHNOLOGIES
in Figure 2 and the dimensions of the components of the Press Tool assembly are shown in Figures 2 through 5.
Figure 1 The completed Press Tool assembly after assembling the Figure 3 Figure showing the Bottom Plate
Top Plate with the assembly
48
Pulley Support Assembly
Create the components of the Pulley Support assembly and then assemble them, as shown in Figure 1. After creating GRAPHIX
TECHNOLOGIES
the assembly, create its exploded view, as shown in Figure 2. The dimensions of the components are given in Figures
4 through 8.
Figure 6 Left-side view of the Bracket Figure 7 Sectioned front view of the
51
V-Block Assembly
Create all the components of the V-Block assembly and then assemble them, as shown in Figure 1. The dimensions of GRAPHIX
TECHNOLOGIES
the components are shown in Figures 2 and 2.
52
Bench Vice Assembly
In this project, you will create the Bench Vice assembly. Figures B through E shows the views and dimensions of the GRAPHIX
TECHNOLOGIES
components of the Bench Vice assembly.
53
GRAPHIXTECHNOLOGIES
54
Stock Bracket Assembly
In this project, you will create the Stock Bracket assembly shown in Figure 1. The details of the components of the GRAPHIX
TECHNOLOGIES
Stock Bracket assembly are shown in Figures 2 through 8.
55
Motor Blower Assembly
In this project, you will create the Motor Blower assembly shown in Figure 1. The exploded view of the assembly is GRAPHIX
TECHNOLOGIES
shown in Figure 2. The details of the components of the Motor Blower assembly are shown in Figures 3 through 8.
57
GRAPHIX
TECHNOLOGIES
58
GRAPHIX
TECHNOLOGIES
59
Sheetmetal
GRAPHIX
TECHNOLOGIES
60
GRAPHIX
TECHNOLOGIES
61
GRAPHIX
TECHNOLOGIES
62
GRAPHIX
TECHNOLOGIES
63
NOTES
GRAPHIX
TECHNOLOGIES
64