Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SEBU9077-01 35

Maintenance Section
Refill Capacities

Maintenance Section Table 5


4008-30 Engine and Engine with Radiator

Refill Capacities Engine Only

Engine and Radiator


48 L (10.5 Imp gal)

140 L (30.8 Imp gal)

i06682398

Fuel System
Refill Capacities
Refer to the OEM specifications for additional
information on the capacity of the fuel system.
Lubrication System i06519545

The refill capacities for the engine crankcase reflect


the approximate capacity of the crankcase or sump
Fluid Recommendations
plus standard oil filters. Auxiliary oil filter systems will
require more oil. Refer to the Original Equipment
(General Coolant Information)
Manufacture (OEM) specifications for the capacity of
the auxiliary oil filter. Refer to the Operation and
Maintenance Manual, “Maintenance Section” for
more information on Lubricant Specifications. General Coolant Information
Table 3
Engines
NOTICE
Never add coolant to an overheated engine. Engine
Refill Capacities
damage could result. Allow the engine to cool first.
Mini- Maxi-
Engine Sales Compartment or
mum mum
Model System (1) (2) NOTICE
If the engine is to be stored in, or shipped to an area
90.7 L 113.4 L with below freezing temperatures, the cooling system
4006-23 Crankcase Oil Sump (23.9 (29.9 must be either protected to the lowest outside tem-
US gal) US gal) perature or drained completely to prevent damage.
127 L 153 L
4008-30 Crankcase Oil Sump (33.5 (40.4
US gal) US gal) NOTICE
Frequently check the specific gravity of the coolant
(1) These values are the total capacities for the crankcase oil sump
which includes the standard factory installed oil filters and oil
for proper freeze protection or for anti-boil protection.
coolers. Engines with auxiliary oil filters will require more oil.
Refer to the OEM specifications for the capacity of the auxiliary Clean the cooling system for the following reasons:
oil filter.
(2) Approximate capacity of the largest crankcase oil sump. Refer • Contamination of the cooling system
to OEM for more information.
• Overheating of the engine
Cooling System • Foaming of the coolant
Table 4
NOTICE
4006-23 Engine and Engine with Radiator Never operate an engine without water temperature
Engine Only 36 L (9.5 US gal)
regulators in the cooling system. Water temperature
regulators help to maintain the engine coolant at the
Engine and Radiator 120 L (31.7 US gal) proper operating temperature. Cooling system prob-
lems can develop without water temperature
regulators.

Many engine failures are related to the cooling


system. The following problems are related to cooling
system failures: Overheating, leakage of the water
pump and plugged radiators or heat exchangers.

This document has been printed from SPI2. NOT FOR RESALE

You might also like