Professional Documents
Culture Documents
Auto Desk Recap Photo: EXPERIMENT NO: 2 - Assignment DATE:18-03-2022 Creating and Measuring A 3D Model by Photogrammetry
Auto Desk Recap Photo: EXPERIMENT NO: 2 - Assignment DATE:18-03-2022 Creating and Measuring A 3D Model by Photogrammetry
2100030374
CREATING AND MEASURING A 3D MODEL BY PHOTOGRAMMETRY
Aim:
A 3D MODEL BY PHOTOGRAMMETR
Software Requirements:
Auto desk Recap photo
Procedure:
1. Take Images
2. Upload
3. Creating the 3D Model From Images in Photogrammetry Software
4. Post-Processing
5. Go to downloaded file location and open the image in ultimaker
cura software,
6. Adjust the height and size of object by adjusting x , y and z co-
ordinates.
7. Select the material you’re gonna use, set the temperature, speed.
8. And then after adjusting all your needed components slice it,
there it shows the time, amount of material to be use
9. Save to disk and convert into g-code. Import that g-code memory
card insert it in your 3d printer and print the object by selecting your
object.
CURA PARAMETERS:
S.NO CURA PARAMETER NAME VALUE
1. Nozzle Size 0.4mm
2. Material and quantity PLA
3. Printing duration 49min
4. Bed temprature 60
5. Nozzle temp 240
6. Infill density 80%
7. Printing speed 50m/s
EXPERIMENT REPORT
(All steps clearly stated)
OBSERVATIONS AND DATA 15
TOTAL 20