Professional Documents
Culture Documents
AD Drilling Manual 600 Series 2018pangea
AD Drilling Manual 600 Series 2018pangea
AD Drilling Manual 600 Series 2018pangea
schrammhammersandbits.com
2
CONTENTS
Page Number
Schramm Hammers & Bits, Reverse Circulation Hammers, Percussion Bit & Sleeve Details
AD610 4-5
AD620 6-7
AD638 8-9
AD640 10-11
AD650 12-13
AD660 14-15
AD670 15-16
ADAPTOR SUB CONFIGURATIONS 17
CONSTANT HAMMER BITS 18
CONTACTS 19
3
SPARE PARTS LISTING: AD610RC (Hammer OD 80mm) comes complete with Adaptor Sub
Item No Description Part No Weight (kg) Qty
Thread available in Bostech, Westrod and Blank To suit nominal bit sizes: 85mm - 102mm Bit Range: 85 (3-11/32”) - 102 (4”)
Item No Description
1 CIRCLIP SEE OVER PAGE FOR FULL DETAILS
2 I-TUBE OUTER Ó RING SEE OVER PAGE FOR FULL DETAILS
OUTSIDE DIAMETER OF ALL SLEEVE’S IS
3 ADAPTOR I-TUBE 1.6MM (1/16”) SMALLER THAN THE
4 I-TUBE INNER Ó RING NOMINAL BIT DIAMETER.
5 ADAPTOR SUB
Hammer Information
1500 — 2000 FT/LBS 1 – 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 70MM
4
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD610 Sleeves
Sleeve Part Number Sleeve Finish Diameter Suit Bit Size Percussion Bit Part Number
5
SPARE PARTS LISTING: AD620RC (Hammer OD 95mm) comes complete with Adaptor Sub
Item No Description
1 CIRCLIP SEE OVER PAGE FOR FULL DETAILS
2 I-TUBE OUTER Ó RING
OUTSIDE DIAMETER OF ALL SLEEVE’S IS SEE OVER PAGE FOR FULL DETAILS
3 ADAPTOR I-TUBE 1.6MM (1/16”) SMALLER THAN THE
4 I-TUBE INNER Ó RING NOMINAL BIT DIAMETER.
5 ADAPTOR SUB
Hammer Information
1500 — 2000 FT/LBS 1 – 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 88.9 MM
6
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD620 SLEEVES
Sleeve Part Number Sleeve Finish Diameter Suit Bit Size Percussion Bit Part Number
620920-01 100 102 (4”) B620102DC
7
SPARE PARTS LISTING: AD638RC (Hammer OD 118mm) comes complete with Adaptor Sub
Item No Description
1 CIRCLIP SEE OVER PAGE FOR FULL DETAILS
2 I-TUBE OUTER Ó RING
OUTSIDE DIAMETER OF ALL SLEEVE’S IS SEE OVER PAGE FOR FULL DETAILS
3 ADAPTOR I-TUBE 1.6MM (1/16”) SMALLER THAN THE
4 I-TUBE INNER Ó RING NOMINAL BIT DIAMETER.
5 ADAPTOR SUB
Hammer Information
3100 —3600 FT/LBS 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 101.6 MM
Air Pressure - PSI AIR PRESSURE - CONSUMPTION - WEIGHT CHART Weight on Hammer - lbs
1000 9500
900 8500
800 7500
700 6500
600 5500
500 4500
400 3500
650 750 850 950 1050 1150 1250 1350 1450 1550 1650 1750 1850 1950 2050
Nominal Air Consumption - Cubic Feet Per Minute
8
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD638 SLEEVES
Sleeve Part Number Sleeve Finish Diameter Suit Bit Size Percussion Bit Part Number
640920-01 122.2 124 (4-7/8”) B640124DC
9
SPARE PARTS LISTING: AD640RC (Hammer OD 121mm) comes complete with Adaptor Sub
Item No Description
1 CIRCLIP SEE OVER PAGE FOR FULL DETAILS
2 I-TUBE OUTER Ó RING
OUTSIDE DIAMETER OF ALL SLEEVE’S IS SEE OVER PAGE FOR FULL DETAILS
3 ADAPTOR I-TUBE 1.6MM (1/16”) SMALLER THAN THE
4 I-TUBE INNER Ó RING NOMINAL BIT DIAMETER.
5 ADAPTOR SUB
Hammer Information
3100 —3600 FT/LBS 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 101.6 MM
Air Pressure - PSI AIR PRESSURE - CONSUMPTION - WEIGHT CHART Weight on Hammer - lbs
1000 9500
900 8500
800 7500
700 6500
600 5500
500 4500
400 3500
650 750 850 950 1050 1150 1250 1350 1450 1550 1650 1750 1850 1950 2050
Nominal Air Consumption - Cubic Feet Per Minute
10
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD640 SLEEVES
Sleeve Part Number Sleeve Finish Diameter Suit Bit Size Percussion Bit Part Number
640920-03 125.4 127 (5”) B640127DC
COLLARING BITS
11
SPARE PARTS LISTING: AD650RC (Hammer OD 125mm) comes complete with Adaptor Sub
5 ADAPTOR SUB
Hammer Information
3100 —3600 FT/LBS 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 101.6 MM
Air Pressure - PSI AIR PRESSURE - CONSUMPTION - WEIGHT CHART Weight on Hammer - lbs
1000
10500
900
9500
800
8500
700
7500
600 6500
500 5500
400 4500
700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
Nominal Air Consumption - Cubic Feet Per Minute
12
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD650 SLEEVES
Sleeve Part Number Sleeve Finish Diameter Suit Bit Size Percussion Bit Part Number
13
SPARE PARTS LISTING: AD660RC (Hammer OD 130mm) comes complete with Adaptor Sub
Item No Description Part No Weight (kg) Qty
Item No Description
1 CIRCLIP SEE OVER PAGE FOR FULL DETAILS
2 I-TUBE OUTER Ó RING
OUTSIDE DIAMETER OF ALL SLEEVE’S IS SEE OVER PAGE FOR FULL DETAILS
3 ADAPTOR I-TUBE
1.6MM (1/16”) SMALLER THAN THE
4 I-TUBE INNER Ó RING NOMINAL BIT DIAMETER.
5 ADAPTOR SUB
Hammer Information
3600 — 4500 FT/LBS 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 101.6 MM
14
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD660 SLEEVES
Sleeve Part Number Sleeve Finish Diameter Suit Bit Size Percussion Bit Part Number
COLLARING BITS
165 6-1/2" B660165RCN 8 x 5/8" 10 x 5/8" 18.9 41.7
178 7" B660178RCN 8 x 5/8" 10 x 5/8" 20.2 44.5
15
SPARE PARTS LISTING: AD670RC (Hammer OD 132mm) comes complete with Adaptor Sub
Item No Description Part No Weight (kg) Qty
Item No Description
1 CIRCLIP SEE OVER PAGE FOR FULL DETAILS
2 I-TUBE OUTER Ó RING
OUTSIDE DIAMETER OF ALL SLEEVE’S IS SEE OVER PAGE FOR FULL DETAILS
3 ADAPTOR I-TUBE
1.6MM (1/16”) SMALLER THAN THE
4 I-TUBE INNER Ó RING NOMINAL BIT DIAMETER.
5 ADAPTOR SUB
Hammer Information
3600 — 4500 FT/LBS 2 LITRES PER HOUR PISTON TO PISTON CASE CLEARANCE 0.3 MM 101.6 MM
16
Schramm Hammers and Bits recommend running an Airdrill Series Sleeve with our
hammers and drill bits. Refer to the table below for sleeve part numbers.
AD670 BIT RETENTION SLEEVES
COLLARING BITS
165 6-1/2" B670165RC 8 x 5/8" 10 x 5/8" 18.9 41.7
178 7" B670178RC 8 x 5/8" 10 x 5/8" 20.2 44.5
191 7-1/2" B670191RC 8 x 5/8" 10 x 5/8" 23.4 51.6
17
Australian Contacts International Contacts
X&M Suppliers
06 BP 1806 Abijan 06—Côte d’Ivoire
Phone: +225 21 01 52 59
E-mail: sales@xandmsuppliers.com
Web: www.xandmsuppliers.com
18
NOTES
19
Schramm Hammers and Bits
60 Paramount Drive
Wangara, 6065
Australia
General Enquiries
Phone: +618 9302 5317
Fax: +618 9302 3715
SalesADHB@schramminc.com
www.SchrammHammersandBits.com