SSimplex
410085 Fire Alarm System Overator's Manual
Tl Install mode
The Install Moe is 2410065 feature that allows the user to minimize |
lor when it's undergoing extensive service
Install Mode allows the tecni elect device points and cards that might raise Troubles due to Installation issues and pl
install made, Install made wil orl ralse one Leouble INSTALL MODE ACTIVE, regardless cf the numbe of tems
wih a revision 7.01 of the £5 Pro
‘amount of Troubles that occur when the system being instal
Install mode i available on panels programme rammer or later.
111 Accessing install mode
Install mode is accessed direct from the user interta
Te access install mode
‘cwer-up the panel
2 Loginto the FACP at a vel 3 or higher
‘Once logged in you can mave and remove points, cards, Ists and groups to and fom install ode
112 Adding and removing items to and from install mode
11.21 Adding and removing points and cards
‘Adding and removing points and cards
Moving a point or a card to install M
Important: & card inthe Install Mode List no longer reports cara faults, For example, 2 power supply in install mode does not rep
‘alles, depleted/missing batteries, or ground fauks
Press on the button that represents the point type you want toad o Install Mo
TNet points
Enter the Name or Address of the em you want vo add
Press Enter
nee the tem a
For example, press onthe 6 outton to access
ears onthe esplay, press the More Inf
lect Add this Point/Gard to Install Mode?
Press Enter to confirm the selection and move the item to Install med
Use the arrows ta fine a
page 2 579-197 Rev.SSimplex
410085 Fire Alarm System Overator's Manual
11.22 Removing a point or a card from install mode
Press on th ype you want to move to inst
button that represents the po
Enter the Name or Address of the ier you want co move.
Press Enter.
nce the tem appears on the display, press the More Info button
Use the atrons ta fine and select Remove Point/Card from Install Mode?
1 ponticard from install mod
ctively), one of the following screens is ssplayes
Press Enter to confer the selection and remeve
Depending upon the state ofthe point being cemaved (normal or alarm, resp
Please stand by.
Ml-6 Will Enable in 60 seconds
“*WARNING** Press to abort
Mi-6 will Alarm in 60 seconds
Install Mede List (without warning)
Important: An Atm could be reported after removing a List or 8 Cat om U
11.23 Adding and removing lists from install mode
ners Manual (S748)
Note: fr information on making lists refer to the £5 Pane! Progra
ess on the 9 button to access the lls
2. Enter the Number ofthe Ist you want to move
3 Press Enter.
4. Once the tem appears onthe display
Press 1 ta mave the Isto install made.
Press 2ta remove the
nce the action has been c
Please stand by..
Mi-6 Will Enable in 60 seconds
Important: An Akt could ve reported after removing a Ist ora card from the Install Mode List (wchout warning)
its that raise the same trouble to install mode
11.2.4 Adding a group of p
Press onthe Menu burton
Use the arrows ta seri to
2 1 Diagnostic Function oation
3 Press Enter
4 From that menu, use the arrows to scroll down tothe Wiew/Change Install Mode List ort
5
5
Press Enter
1 arrows to scroll down and select the group of roubles you want moved to instal
From View Change Install Mode List use
mode, For Example
Move NO ANSWER devices to Install mode?
Select the group and press Enter to add them to install m
page 30 579-197 Rev. NSSimplex
410085 Fire Alarm System Overator's Manual
11.25 Removing a group of points from install mode
Press on the Menus bution
2. Use the arrons ta scroll tothe Diagnostic Function ostion.
4. Press Enter.
4. From that meng, use the arrons ta scroll down ta the Wiew/Change Install Mode List optior
5. Press Enter.
6 From View Change Install Mode List use she arrows to scroll down and select ether:
Remove ALL NORMAL pts from Install Mode
Remove ALL POINTS from Install Mode. Choos ng this option makes th
lowing screen appear:
Please stand by.
Ml-€ | Will Enable in 60 seconds
Important: Actve Alms can intlate without warning ater the 60 second! countdown,
113 Viewing install mode
To view install mode
Press the Manu busto
Use the arrons to scroll tothe Diagnostic Funetion ost
Press Enter
From that menu, use the arrows to sere
>ress Enter
From View Change Install Mode List use the arrows to sero down an Select View the Install Mode List
e View/Change Install Mode Lis!
Press Enter to display the lst of tems in inst
page 31 579-197 Rev. N