Professional Documents
Culture Documents
Trolley DBP 55 and 110 Installation
Trolley DBP 55 and 110 Installation
Ident. no.
Load bar for D-BP 55 / 110 214 196 44
Assembly instructions Issue 210502 EN
Load bar for D-BP 55 / 110 rope In KBK applications, rope balancers are flexibly connected to trolleys using a load
balancer bar.
Straight travel The load bar is symmetrical and is supplied with an anchorage point for the power
Part. no. 984 685 44 supply on the left. An anchorage point on the opposite side is possible, if required.
The anchorage point is designed for hose bracket set 2 according to data sheet
214 575 44.
The load bar is suitable for connection to the following KBK trolleys
(Design: classic): KBK 100, KBK I, Aluline 120
KBK II-L, KBK II, Aluline 180
Washers are not required for the following trolleys: Load capacity: 230 kg
KBK 100, KBK I, Aluline 120 Weight: 1,85 kg
Coating: Load bar (KTL), paint finish in black
Galvanized pins and washers
Anchorage point
preassembled on
the left as standard
42428944.eps
The following values are applied for specifying the track and crane:
D-BP 55: K = 80 kg
D-BP 110: K = 160 kg (see catalogue 202 975 44)
System dimensions Connection dimensions for KBK installations with D-BP 55 / 110 rope balancer.
The left anchorage point is selected for bracket assembly.
42429044.eps
Trolleys are not included in the scope of delivery of the load bar.
#= Modifications compared to Class. no.
previous issue
7626 KBK Engineering 720 IS 152
Reproduction in whole or in part only with prior consent of Demag Cranes & Components GmbH, D-58286 Wetter Not liable for errors or omissions. Subject to change.
KBK installations 2 pages Page 2
Ident. no.
Load bar for D-BP 55 / 110 214 196 44
Assembly instructions Issue 210502 EN
Assembly example: Arrangement of load bar with KBK Aluline 120 trolleys and bracket set 2 to D-BP 110
rope balancer.
Washers are
not necessary for KBK
100, KBK I, Aluline 120.
Position of support
washers
Position load bar and secure to rope
balancer.
Observe position of
support washers.
Bracket set 2
Part no.: 855 145 44