Professional Documents
Culture Documents
1.: IS 9281 (PART 3) : 1981: Electronic Weighing Systems: 1
1.: IS 9281 (PART 3) : 1981: Electronic Weighing Systems: 1
This Product Manual shall be used as reference material by all Regional/Branch Offices &
licensees to ensure coherence of practice and transparency in operation of certification under
Scheme-I of Bureau of Indian Standards (Conformity Assessment) Regulations, 2018 for
various products. The document may also be used by prospective applicants desirous of
obtaining BIS certification licence/certificate.
2. Sampling Guidelines:
a) Raw material : Not Applicable
b) Grouping guidelines : Please refer ANNEX – A
c) Sample Size : One sample of Electronic Weighing System
Scheme of Inspection
4. : Please refer ANNEX – C
and Testing
ANNEX A
Grouping Guidelines
1. Electronic weighing systems are manufactured with different class of accuracy and each
accuracy class may have a number of capacities of weighing systems. Different capacities
of weighing systems of each accuracy class are manufactured with:
2. For the purpose of GoL/CSoL of additional class of accuracy weighing systems and various
capacities in a particular class of accuracy weighing systems, one sample of one capacity
from each accuracy class weighing system shall be tested for all the requirements of ISS to
cover that particular class of accuracy weighing systems with all capacities.
3. The Firm shall declare the varieties of Electronic Weighing Systems they intend to cover
in the Licence.
4. The Scope of Licence may be restricted based on the Manufacturing and Testing
capabilities of the Manufacturer.
5. During the operation of the Licence, BO shall ensure that all the varieties covered in the
Licence are tested in rotation, to the extent possible.
2
PM/ IS 9281 (Part 3)/ 1/ July 2019
ANNEX B
The above list is indicative only and may not be treated as exhaustive.
3
PM/ IS 9281 (Part 3)/ 1/ July 2019
ANNEX C
1.1 The manufacturer shall prepare a calibration plan for the test equipments.
2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out
to establish conformity.
3. LABELLING AND MARKING – As per the requirement of IS 9281 (Part 3): 1981.
4. CONTROL UNIT – All the electronic weighing systems of same class and rating
manufactured in a week shall constitute a control unit.
5. LEVELS OF CONTROL - The tests as indicated in column 1 of Table 1 and the levels of
control in column 3 of Table 1, shall be carried out on the whole production of the factory
which is covered by this plan and appropriate records maintained in accordance with paragraph
2 above.
5.1 All the production which conforms to the Indian Standards and covered by the licence
should be marked with Standard Mark.
4
PM/ IS 9281 (Part 3)/ 1/ July 2019
TABLE 1
Accuracy
Non-linearity
Number of scale
division 3.2 &
IS 9281 (Part 3): 1981 R Each weighing machine
Table 2
Resolution
Tare Provision
Display
5
PM/ IS 9281 (Part 3)/ 1/ July 2019
6
PM/ IS 9281 (Part 3)/ 1/ July 2019
Note-1: Sub-contracting is permitted to a laboratory recognized by the Bureau or Government laboratories empanelled by the Bureau.
Note-2: The control unit and levels of control as decided by the Bureau are obligatory, to which the licensee shall comply with.
7
PM/ IS 9281 (Part 3)/ 1/ July 2019
ANNEX D
Rated Load
Accuracy
Non-linearity
Resolution
8
PM/ IS 9281 (Part 3)/ 1/ July 2019
ANNEX E
Licence is granted to use Standard Mark as per IS 9281 (Part 3): 1981 with the following scope: