NABL ACCREDITED LABORATORY AS PER ISO/IEC 17025: 2017
SAFE BEARING CAPACITY SOIL
(As per IS 6403-1981) DATA: chainage / Location * : 485+065 Sample No : 1 Location* : BOX CULVERT 1 x 2.0 Depth of Footing / .Sample Collected (d) : 1.50 m Width of Footing (B) : 5.00 m Length of Footing (L) : 5.00 m Shape of Footing Square Dry Density (Ydry) : 1.65 gm/cc Ydry w Bulk Density( ٧b ) ((1+w/100)*Ydry) : 1.93123 gm/cc 1.645 17.4 Shear Parameters: (C & Φ) Ybulk = 1.93123 2 Cohesion ( C ) : 0.30 kgf/cm Angle of Internal Friction ( Φ ) : 17 degrees Specific Gravity (Gs) : 2.53 Void ratio (e) : 0.54 e = ((Gs*1)/Ydry)-1) : 0.54 Saturated density ٧sat : 1.99 gm/cc ٧sat = ((Gs+e)٧w / 1+e) : 1.99 Submersible Density ٧s (٧sat -1) : 0.99 gm/cc 2 Over Burden Pressure (q)( (d x٧s)/10) : 0.15 kg/cm Effect of Water Table (W') : 1.00 Water table Considered Water table Considered as per IS 6403 Cluase no 5.1.2.4 (b), Type of Failure is : Local Shear Failure as per IS 6403 table No - 1, Bearing Capacity Factors Considered N'c = 9.179 N'q = 2.933 N'٧ = 1.671 Breadth of footing assumed (B) : 5.00 m Length,L= 5.00 m
Depth of Ground Water Table* : 0.00 m Hence W'= 1.00
as per IS 6403 table No - 2, Shape Factors Considered Shape Factors for Square Sc= 1.3 Sq= 1.2 S٧= 0.8 Depth Factor Correction is to be applied As per IS 6403 Cluase no 5.1.2.2 (only when back filling is done with proper compaction.) DEPTH FACTORS Nf 1.351 dc= 1.081 ; dq=dr= 1.041 0 Inclination Factors ic = iq = i٧ = 1 as angle of inclination is taken as 0
Factor of safety( F ) : 2.5
as per IS 6403 table No - 1, Bearing Capacity Factors Applied SBC= { ( C N'c Sc dc ic)+ q ( N'q-1) Sq dq iq +½ x B ٧b N'٧ S٧ d٧ i٧ W'} F = 1 { 2.580 + 0.700 + 0.672 } 2.5 + 0 = 3.951 + 0.000 = 1.581 + 0.000 2.5 2 = 1.581 Kg/cm Net safe Bearing capacity (NSBC)= 15.81 t/m2