Professional Documents
Culture Documents
For Heavy Traffic Areas Such As Stair Cases. For Ceramic and Gres Tiles
For Heavy Traffic Areas Such As Stair Cases. For Ceramic and Gres Tiles
Description
Uses
Can be used with different types of tiles and natural stones. The following values obtained when tested in accordance with
BS EN12004:2017
Suitable for underfloor heating.
Appearance : Powder
For heavy traffic areas such as stair cases. :
Color GREY
For ceramic and gres tiles. Open time : ≤ 20 minutes
Factory controlled pre-blended dry mix which requires only Initial tensile adhesion strength :
under normal condition
≥ 1.0 MPa
addition of water. Tensile adhesion strength : ≥ 1.0 MPa
Low VOC. after heat ageing
:
No hacking required prior to application. Tensile adhesion strength after
water immersion ≥ 1.0 MPa
Standard Compliance
Application Instructions
BS EN 12004:2017 as C2T Surface preparation
ANSI A118.1 The substrate should be sound and clean from dust, oils, dirt,
GOST R 56387-2018 curing compounds, etc. It should be also sufficiently cured to
avoid any shrinkage cracks. The substrate should be dampened
and excess water to be removed prior to application
Page 1 of 2
TAG 114
Mixing Storage
Pour into a suitable container 5.0 – 5.50 liters of clean water. TAG 114 has a shelf life of 12 months when stored in its original
Add 25 kg powder to the water and mix using a low speed mixing unopened packing in dry conditions. Shelf life may reduce if the
drill fitted with the suitable mixing paddle. Continue mixing for 2- recommended storage conditions changed.
3 minutes until achieving lumps-free mix. Allow the mixed
material to stand for 1-2 mins then re-stir slightly with no extra Safety Instructions
water to be added to the mix.
Like any cementitious tile adhesive, TAG 114 contains hydraulic
Application cement and may cause irritation to skin or eyes. For further
information Refer to the Material Safety Data Sheet.
Spread the tile adhesive using the flat side of the trowel and
comb it using the notched trowel to ensure having a controlled Disclaimer
thickness. Place the tiles firmly onto the substrate with pressure
and fix it to the desired position. Manaseer Industrial Complex has the right to amend its
datasheets anytime. Please make sure to have the latest
The applied material should be covered with tiles within the open published datasheet version.
time of the product to avoid loss of adhesion. Do not add water
In case of loss of workability.
Cleaning
Consumption
Packaging
Page 2 of 2
Tel: + 962 6 5800600 Fax: + 962 6 5833890 P.O.Box 141414 Amman 11814, Jordan Website: www.manaseer-ic.com Email: info@manaseer-ic.com
Note: All information provided and recommendations made herein are intended to assist customers in determining whether our products are suitable for their applications.
We request that customers inspect and test our products before use in order to make their own final decision regarding suitability. We do not guarantee results, freedom
from patent infringement, or suitability of resultant products for any suggested application with respect to the use of any formula or material described herein.