Professional Documents
Culture Documents
Di650i Maintenance Planner English
Di650i Maintenance Planner English
LEOPARD
Breather
1 Engine Air Filter 2 Engine Air Filter 16 Hydraulic Oil
9.Compressor 10.Compressor Return Filter 500h
DI650i
(Primary) (Secondary) Air Filter (Primary) Air Filter 500h
(Secondary)
Tier3/
500h 500h 500h
19 Grease Cartridge 500h
2 Months 14 Hydraulic Oil
BG01171534 E
manual.
20 Filter (Inner)
1000h
22 Re-circulation
Air Filter 21 Filter (Outer)
1000h 1000h
LEOPARD For ordering Maintenance Kits It is always recommended to adjust
contact your local Sandvik maintenance
Note:
Follow the Maintenance program in the Maintenance manual.
DI650i
- Perform 250h maintenance procedures every 250h i.e., 250h, 500h, 750h etc.,
Sales Organization or visit your operationintervals according to - Perform 500h maintenance procedures every 500h i.e., 500h, 1000h, 1500h etc.,
Tier3/ mining.sandvik.com
Sandvik reserves the right to change the
conditions.
The warranty is not valid if other than
- Perform 1000h maintenance procedures every 1000h i.e., 1000h, 2000h, 3000h etc.,
- Perform 2000h maintenance procedures every 2000h i.e., 2000h, 4000h, 6000h etc.,
- Perform 4000h maintenance procedures every 4000h i.e., 4000h, 8000h, 12000h etc.,
Tier4 / Stage V service parts or this information without
further notice. Please cross-check part
numbers and quantities from the Parts
manual.
GENUINE SANDVIK SPARE PARTS
have been used in the equipment.
Items needed at respective maintenance interval as displayed in the table are already added
as part of standard maintenance kits.
Any items needed at maintenance interval apart from mentioned in table, order to be placed
separately as needed.
MAINTENANCE KITS CAT C15 T3/T4/Stage V
Tier 3 Tier 4 /
For Tier 3 engine 1000h kit is recommended to use for 5000h Stage V
73
74
75
76
08
56
56
56
56
08
6
6
11
11
11
11
14
Component
0
BG
BG
BG
BG
BG
Sr No Component Qty 250h 500h 1000h 1500h 5000h
1 Engine Primary Air Filter Element 1 x x x x
Engine 2 Engine Secondary Air Filter safety Cartridge 1 x x x x
3 Engine Oil Filter Element 1 x x x x x
4 Engine V-Belt 1 x x
5 Fuel Filter / Water Seperator 1 x x x x x
6 Fuel Filter 2 x x x x x
Fuel System
7 Fuel Tank Breather 1 x x x x
8 Fuel Filling Filter Strainer 1 x
9 Compressor Primary Air Filter Element 1 x x x x
10 Compressor Secondary Air Filter Safety Cartridge 1 x x x x
Compressor 11 Compressor Oil Filter Element 1 x x x x
12 Compressor Oil Seperator Element 1 x
13 Compressor Blow-out Breather Filter 1 x x x x
14 Hydraulic Oil Tank Breather 1 x x x x
Hydraulic System 15 Hydraulic Oil Pressure Filter Element 2 x x x x
16 Hydraulic Return Oil Filter Element 1 x x x x
Shank Lubrica�on / 17 SLU Filling Cap with Breather 1 x
DTH Hammer Oiler 18 Pneuma�c circuit water trap filter element 1 x x x x
Hose Reel Central Lubrica�on 19 Grease cartridge 1 x x
20 Cabin Air Filters (Inner) 1 x x
Cabin 21 Cabin Air Filters (Outer) 1 x x
22 Cabin Recircula�on Air Filter 1 x x
23 DEF Pump Filter(Only for T4/Stage 5) 1 x
DEF System
24 DEF Injector(Only for T4/Stage 5) 1 x
Sl.No Rota on Head STD Op onal
Dust Collector Filter Element 4 1 HTRH6 x
2 MRH6 x
Dust Collector Filter - BG01013785
Note : 5000h Kit is applicable for Tier4/Stage V. Rota on head HTRH6
Life of Dust collector Filters depends on machine drilling condi on. Check and replace as necessary. 1 Floa ng module bolts and pins BG00547637 1 1000
Maximum Filters Needed for the machine : 4 Nos. 2 Floa ng module seals BG00547634 1 1000
3 Air Inlet Seals BG00561547 1 1000
Hose Reel Grease Cartridge 4 Air Inlet bolts BG00542614 1 1000
BG01171534 E
BG00613529 Wide temperature grease -30 to +140C. Includes ba eries.
BG00621432 Extreme cold,wet and varying weather grease -40 to +110C. Includes ba eries. Rota on head MRH6
The grease cartridge se ng replacement period is 2months. 1 Flushing inlet service kit (MRH6) BG01242204 1 1000
2 Front adapter service kit (MRH6) BG01242468 1 1000
3 Spindle service kit BG00547637 1 1000
4 Spindle seal service kit BG00547634 1 1000
The maintenance kits are valid when no changes have been made to the machine. In case the machine has been modified, please contact your local Sandvik.