Professional Documents
Culture Documents
ER200 THRU ER206: Superfast Recovery Rectifiers VOLTAGE - 50 To 600 Volts CURRENT - 2.0 Amperes
ER200 THRU ER206: Superfast Recovery Rectifiers VOLTAGE - 50 To 600 Volts CURRENT - 2.0 Amperes
FEATURES DO-15
l Superfast recovery times-epitaxial construction
l Low forward voltage, high current capability
l Exceeds environmental standards of MIL-S-19500/228
l Hermetically sealed
l Low leakage
l High surge capability
l Plastic package has Underwriters Laboratories
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
MECHANICAL DATA
Case: Molded plastic, DO-15
Terminals: Axial leads, solderable to MIL-STD-202,
Method 208
Polarity: Color Band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
NOTES:
1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
3. Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted
trr 2.4
CURRENT, AMPERES
0 OR INDUCTIVE
1.4 LOAD.375"
-0.25 9.5mm LEAD
1.2 LENGTHS
0.8
NOTE:1.Rise Time = 7ns max.
Input Impedance = 1 megohm. 22pF -1.0
0.4
2.Rise Time = 10ns max. SET TIME 1cm
Source Impedance = 50 Ohms BASE FOR 0
25 50 75 100 125 150 175
50 ns/cm
AMBIENT TEMPERATURE, ¢J
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND Fig. 2-MAXIMUM AVERAGE FORWARD
CURRENT RATING
TEST CIRCUIT DIAGRAM
1,000
INSTANTANEOUS FORWARD CURRENT, 50.0
INSTANTANEOUS REVERSE CURRENT,
ER200 ~ ER202
TJ = 100 ¢J
100 10.0 ER203 ~ ER204
MICROAMPERES
TJ = 75 ¢J
AMPERES
1
1.0
TJ = 25¢J ER206
1.0
0.1
TJ = 25 ¢J
0.
PULSE WIDTH = 300£gs
2% DUTY CYCLE
0.01 0.01
0.4 0.5 0.8 1.0 1.2 1.4 1.6 1.8
0 20 40 60 80 100 120 140
60
50 60
CAPACITANCE, pF
JEDEC METHOD
40 TJ = 25 ¢J
30
f = 1.0MHz
30 Vsig = 50mVp-p
20
20
10
10