Summary Fan Data Sheet: Technical Data Performance Chart

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SUMMARY FAN DATA SHEET

Nuaire, Western Industrial Estate, Caerphilly, CF83 1NA, United Kingdom. email:info@nuaire.co.uk
UK Commercial enquiries T:029 2085 8200 UK Residential enquiries T:029 2085 8500 International enquiries T:+44.29 2085 8497
Whilst the information given on this data sheet is fan specific, it is in summary and reference to the product selection catalogue and installation & maintenance documents is recommended.
This data sheet produced on 11 Apr 2022 16:53 using software version 5.6.4267.0

Technical Data
This unit CANNOT be sold for use in the UK or EU Performance Chart
from 1-Jul-2021. CE UKCA Mark not applicable
Smoke Long Case. Class H 400°C/2hr, 7.94 kW 4P 400V 3ph 60Hz
TEAO IP55. Steel impeller. Galvanised steel case.
Fan Code: AX80AZ-54S8-39/J
Installation Manual Links: 671156
Required duty: 8 m³/s at 400 Pa
Actual duty: 8.006 m³/s at 401 Pa
Actual at required flow: 8 m³/s at 401 Pa
At full speed:
Absorbed power: 7.743 kW
Maximum Absorbed power: 7.743 kW
Motor Input Power: 8.556 kW
Specific Fan Power: 1.1 W/(l/s)
Fan Total Efficiency: 57%

Maximum Fan Speed: 4 pole, 1,755 RPM


Electrical Supply: 400V, 3 Phase, 60 Hz
Motor Rating: 7.94 kW
Motor current (flc): 14.53 A
Motor starting current (sc): 112.18 A (DOL) 37.39 A (SD)
Overload setting: 15.98 A
Motor Efficiency: IE2 / High Efficiency
Starting currents are nominal. D.O.L. is recommended.
Blade angle: 25 °
Max. Operating Temp: 400°C for 2 hours

BSI Certificate: KM614968. EN12101-3-2015 Powered


smoke and heat exhaust ventilators for use in
Construction Works. Application Classes - uninsulated,
smoke reservoir, dual purpose. Class F400 - 400°C / 120 Selected Ancillaries
min. Motor rating class F / H. 2 x CFCH80 Hi-temp flexible connector
2 x CMF80 Matching flange
Sound Data 1 x CMB80 Mounting bracket (pair)
1 x NAV47 Anti-vibration mounting kit
Noise calculated speed controlled to required duty (100%)
CFCH80 - Hi-temp flexible connector
Sound Power Levels re 1 pWatts (Hz): Weight: 2.0 kg
Hz 63 125 250 500 1k 2k 4k 8k dBA
Induct Inlet 99 97 98 96 95 93 89 83 CMF80 - Matching flange
Induct Outlet 101 100 98 97 96 93 89 84 Weight: 5.5 kg
Open Inlet 92 94 97 96 95 93 89 83 CMB80 - Mounting bracket (pair)
Open Outlet 94 97 97 96 96 93 89 84 Weight: 9.0 kg
Breakout 78 77 83 72 68 75 71 59 59
dBA is spherical at 3 metres. For hemi-spherical add 3 dBA.
Specification
800mm diameter long cased circular axial flow fan manufactured from pre-
Values shown are for inlet Lw, outlet Lw sound power & breakout levels for: galvanised mild steel. Fan incorporates inlet and outlet flanges with pre-
Installation Type D: ducted inlet, ducted outlet. Ratings include the effects drilled bolt holes and an external 400/2hr terminal box. Impeller blades
of duct end correction. manufactured from steel mounted in a steel hub as standard. The motor is
Please note that the noise data stated on this data sheet for the unit and/or 400V (+/-5%) three phase, single speed, totally enclosed air over, protected
silencer is tested in accordance with UK, European and International to IP55, foot mounted, class H insulated, with drain holes. Motor efficiency
industry laboratory standards. However onsite conditions may vary and we is IE2. Motor efficiency stated is based on the IEC rated output for the
would recommend that this information is verified by an acoustic specialist motor. Day to day operation up to ambient temperature of 60°C and once
in order to ensure its suitability for the intended application. off at 400°C for 2 hours. D.O.L starting is recommended.

NOTE: This unit cannot be inverter speed controlled.

CFCH80
Circular flexible connector without flanges. Flexible duct material is
flameproof and resistance to heat up to 400°C, chemicals, ozone, oil and
grease. The material is airtight, waterproof and tested to BS476 Part 7.
Supplied complete with fixing straps.
CMF80
The matching flanges are manufactured from galvanised steel and are
supplied individually.
CMB80
The mounting brackets are manufactured from heavy gauge galvanised
steel and supplied in pairs.
NAV47
Spring type anti-vibration mountings, supplied as a set of 4.
SUMMARY FAN DATA SHEET

Nuaire, Western Industrial Estate, Caerphilly, CF83 1NA, United Kingdom. email:info@nuaire.co.uk
UK Commercial enquiries T:029 2085 8200 UK Residential enquiries T:029 2085 8500 International enquiries T:+44.29 2085 8497
Whilst the information given on this data sheet is fan specific, it is in summary and reference to the product selection catalogue and installation & maintenance documents is recommended.
This data sheet produced on 11 Apr 2022 16:53 using software version 5.6.4267.0

Fan Dimensions

A B C D E F G H J
800 904 840 540 760 16 12 860 570
K kg
650 165.61
Length: Width: Height:
840 904 904
Drawing is for dimensional purposes only. Dimensions in mm.

You might also like