Common Troubleshooting to Gravity Paddy Sparator ‘http://ncemullingplant.com/solubons/gravity-paddy-se parator-trouble-sho.
FAQ
HOME> (http://www.ricemillingplant.com)SOLUTIONS> (http://www.ricemilingplant.com/solutions/)FAQ
Common Troubleshooting to Gravity Paddy Sparator
MGCZ Gravity Paddy Separator Introduction
MGCZ gravity paddy separator (http://ricemillingplant.com /rice-mill/separating/m gcz-gravity-
paddy-separator.html) is a new innovative design of new paddy separation equipment combined with the
actual rice raw materials at home and abroad, meet the needs of modern production technology or rice milling
process. The machine is completely solved the technical problem of poor self balance gravity paddy separator
operation.
Phenomenon Causes Elimination method
| suré 13/10/2020 a 20:00Common Troubleshooting to Gravity Paddy Sparator
Phenomenon
Causes
“http://ncemulling plant. com/soluhons/gravity-pacldy-separator-trouble-sho.
Elimination method
Excessive vibration or impact
equipment
li.Fasteners loose, rigid foundation is not
nough, large vibration.
P.Cradle bearing locking screw loosening,
angle adjustment nut loose;
“Two sets of connecting rod bearing gap
large or damaged;
Spindle bearing gap large or damaged;
B.inlet and outlet device and hopper impact;
Connecting rod and bearing appear groove;
V7.Eccentric sleeve and spindle clearance is
too large;
Ear oil is dry.
h..Solid anchor nut and bolt
einforcement;
P.Locking screw and nut;
Replace bearing;
Replace bearing;
B.Adjust ment;
Replace link;
[7.Locking eccentric sleeve
fastening bolt;
Loosen the cloth.
laterial classification is not
lear
h..bnormal vibration of equipment;
P.Loose rivet, board warping;
Uneven flow of each layer;
The material layer is too thick or too thin;
5.Old bran is more, tale unilateral;
Plate horizontal angle is not appropriate;
[7.The screen moves along the length of the
Screen surface;
Debris blockage in sieve layer;
Plate groove inner product full of rice bran
onder;
h0.The yield of feed mixture was less than
5%;
h11.Grain moisture is high or moisture content
fs not uniform;
l.identify the cause and
feliminate the vibration;
P.Fastening the separating
ate to eliminate the warping}
Identify the level, adjust the
low rate;
H.Adjust the flow rate;
B.Control the content of bran;
‘Adjust the angle of
transverse inclination;
[7.f the screen shaft seat is
loose, fastening bolt; If the
‘onnecting rod bearing
learance is large, replace the
earing;
Remove the debris from the
eve;
Remove the plate, clear
lean;
h0. Increase the rate of broken
hell huller;
h.1.Grain will make
corresponding processing
CATEGORIES
13/10/2020 a 20:00