Professional Documents
Culture Documents
Grilles & Registers
Grilles & Registers
Grilles & Registers
& REGISTERS
GRILLES & REGISTERS
SUPPLY AIR GRILLES SAG SERIES SAG SERIES [SAG 111, SAG 112]
AND REGISTERS
Dimensions
35.8
7.8
Neck Size
BXA
AXB
32 20 32
35.8
7.8
Neck Size
BXA
AXB
Standard Sizes
Description Finish:
The SAG Series supply air grilles and registers The standard coating finish is polyester powder
have been designed for residential, commercial coating, white color RAL 9010 (Code: Z0). Neck Size Airflow Neck Size Airflow Neck Size Airflow
and industrial buildings application. This type AxB Range AxB Range AxB Range
of outlets can be installed in high sidewalls and The coating finish of volume control damper is (in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM)
ceiling. If exposed air duct is required it can be polyester powder coating, black color.
8x4 200 x 100 50 - 265 17 x 8 425 x 200 210 - 1130 48 x 8 1200 x 200 615 - 3270
fixed directly to duct collars either for horizontal or
vertical airflow. It is suitable for cooling, heating and Optional Finish: 6x6 150 x 150 50 - 265 14 x 10 350 x 250 210 - 1130 32 x 12 800 x 300 615 - 3270
ventilation applications. It can handle a wide range 1. Natural anodized aluminium finish, (Code: Z1) 10 x 4 250 x 200 60 - 330 40 x 4 1000 x 100 245 - 1310 27 x 14 675 x 350 615 - 3270
of airflows at high temperature differentials and 2. The powder coating can be of any color if 7x6 175 x 150 60 - 330 26 x 6 650 x 150 245 - 1310 24 x 16 600 x 400 615 - 3270
maintain a high quality of air diffusion in occupied requested as specified, (Code: Z1) 12 x 4 300 x 100 75 - 400 19 x 8 475 x 200 245 - 1310 22 x 18 550 x 450 615 - 3270
spaces.
8x6 200 x 150 75 - 400 16 x 10 400 x 250 245 - 1310 20 x 20 500 x 500 615 - 3270
16 x 4 400 x 100 95 - 505 13 x 12 325 x 300 245 - 1310 48 x 10 1200 x 250 760 - 4060
Standard Construction 10 x 6 250 x 150 95 - 505 34 x 6 850 x 150 310 - 1640 40 x 12 1000 x 300 760 - 4060
Materials: 18 x 4 450 x 100 100 - 545 24 x 8 600 x 200 310 - 1640 36 x 14 900 x 350 760 - 4060
The frame and blades are made of extruded 12 x 6 300 x 150 100 - 545 20 x 10 500 x 250 310 - 1640 30 x 16 750 x 400 760 - 4060
aluminum alloy profiles. 8x8 200 x 200 100 - 545 16 x 12 400 x 300 310 - 1640 26 x 18 650 x 450 760 - 4060
21 x 4 525 x 100 130 - 685 14 x 14 350 x 350 310 - 1640 24 x 20 600 x 500 760 - 4060
The extruded aluminum blades are mounted both
14 x 6 350 x 150 130 - 685 38 x 6 950 x 150 355 - 1905 48 x 12 1200 x 300 920 - 4900
GRILLES & REGISTERS
SAG SERIES [SAG 121, SAG 122] SAG SERIES [SAG 111 - V, SAG 112 - V]
Dimensions Dimensions
82
57
7.8
Neck Size Neck Size
BxA
B xA AxB
AxB
32 20 32
82
57
7.8
Neck Size
Neck Size BxA
BxA AxB
AxB
Neck Size Airflow Neck Size Airflow Neck Size Airflow Neck Size Airflow Neck Size Airflow Neck Size Airflow
AxB Range AxB Range AxB Range AxB Range AxB Range AxB Range
(in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM)
8x4 200 x 100 50 - 265 17 x 8 425 x 200 210 - 1130 48 x 8 1200 x 200 615 - 3270 8x4 200 x 100 50 - 265 17 x 8 425 x 200 210 - 1130 48 x 8 1200 x 200 615 - 3270
6x6 150 x 150 50 - 265 14 x 10 350 x 250 210 - 1130 32 x 12 800 x 300 615 - 3270 6x6 150 x 150 50 - 265 14 x 10 350 x 250 210 - 1130 32 x 12 800 x 300 615 - 3270
10 x 4 250 x 200 60 - 330 40 x 4 1000 x 100 245 - 1310 27 x 14 675 x 350 615 - 3270 10 x 4 250 x 200 60 - 330 40 x 4 1000 x 100 245 - 1310 27 x 14 675 x 350 615 - 3270
7x6 175 x 150 60 - 330 26 x 6 650 x 150 245 - 1310 24 x 16 600 x 400 615 - 3270 7x6 175 x 150 60 - 330 26 x 6 650 x 150 245 - 1310 24 x 16 600 x 400 615 - 3270
12 x 4 300 x 100 75 - 400 19 x 8 475 x 200 245 - 1310 22 x 18 550 x 450 615 - 3270 12 x 4 300 x 100 75 - 400 19 x 8 475 x 200 245 - 1310 22 x 18 550 x 450 615 - 3270
8x6 200 x 150 75 - 400 16 x 10 400 x 250 245 - 1310 20 x 20 500 x 500 615 - 3270 8x6 200 x 150 75 - 400 16 x 10 400 x 250 245 - 1310 20 x 20 500 x 500 615 - 3270
16 x 4 400 x 100 95 - 505 13 x 12 325 x 300 245 - 1310 48 x 10 1200 x 250 760 - 4060 16 x 4 400 x 100 95 - 505 13 x 12 325 x 300 245 - 1310 48 x 10 1200 x 250 760 - 4060
10 x 6 250 x 150 95 - 505 34 x 6 850 x 150 310 - 1640 40 x 12 1000 x 300 760 - 4060 10 x 6 250 x 150 95 - 505 34 x 6 850 x 150 310 - 1640 40 x 12 1000 x 300 760 - 4060
18 x 4 450 x 100 100 - 545 24 x 8 600 x 200 310 - 1640 36 x 14 900 x 350 760 - 4060 18 x 4 450 x 100 100 - 545 24 x 8 600 x 200 310 - 1640 36 x 14 900 x 350 760 - 4060
12 x 6 300 x 150 100 - 545 20 x 10 500 x 250 310 - 1640 30 x 16 750 x 400 760 - 4060 12 x 6 300 x 150 100 - 545 20 x 10 500 x 250 310 - 1640 30 x 16 750 x 400 760 - 4060
8x8 200 x 200 100 - 545 16 x 12 400 x 300 310 - 1640 26 x 18 650 x 450 760 - 4060 8x8 200 x 200 100 - 545 16 x 12 400 x 300 310 - 1640 26 x 18 650 x 450 760 - 4060
21 x 4 525 x 100 130 - 685 14 x 14 350 x 350 310 - 1640 24 x 20 600 x 500 760 - 4060 21 x 4 525 x 100 130 - 685 14 x 14 350 x 350 310 - 1640 24 x 20 600 x 500 760 - 4060
14 x 6 350 x 150 130 - 685 38 x 6 950 x 150 355 - 1905 48 x 12 1200 x 300 920 - 4900
GRILLES & REGISTERS
14 x 6 350 x 150 130 - 685 38 x 6 950 x 150 355 - 1905 48 x 12 1200 x 300 920 - 4900
52 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 53
SUPPLY AIR REGISTER I DOUBLE DEFLECTION
PERFORMANCE DATA
WITH ADJUSTABLE BLADES AND VOLUME DAMPER
Dimensions
Discharge 300 400 500 600 700 800 1000 1200 1400 1600
Velocity
Model: SAG 121 -V NECK SIZE Ak
Model: SAG 121 - V inches 0.019 0.031 0.043 0.058 0.077 0.119 0.175 0.236 0.308
32 20 32 (ft²) 0° 0.011
(in) Pr.
Drop. 221/2 ° 0.013 0.022 0.036 0.051 0.068 0.092 0.142 0.207 0.281 0.364
101 45 ° 0.021 0.039 0.064 0.087 0.119 0.159 0.245 0.357 0.483 0.629
8x 8 200 x 200 100 - 545 16 x 12 400 x 300 310 - 1640 26 x 18 650 x 450 760 - 4060 NC <20 <20 <20 <20 22 26 32 38 43 47
21 x 4 525 x 100 130 - 685 14 x 14 350 x 350 310 - 1640 24 x 20 600 x 500 760 - 4060
GRILLES & REGISTERS
14 x 6 350 x 150 130 - 685 38 x 6 950 x 150 355 - 1905 48 x 12 1200 x 300 920 - 4900
Table 2S Table 3S
Discharge 300 400 500 600 700 800 1000 1200 1400 1600 Discharge 300 400 500 600 700 800 1000 1200 1400 1600
Velocity Velocity
NECK SIZE Ak NECK SIZE Ak
inches (ft²) 0° 0.011 0.019 0.031 0.043 0.058 0.077 0.119 0.175 0.236 0.308 inches (ft²) 0° 0.011 0.019 0.031 0.043 0.058 0.077 0.119 0.175 0.236 0.308
Pr. Pr.
(in) (in)
Drop. 221/2 ° 0.013 0.022 0.036 0.051 0.068 0.092 0.142 0.207 0.281 0.364 Drop. 221/2 ° 0.013 0.022 0.036 0.051 0.068 0.092 0.142 0.207 0.281 0.364
45 ° 0.021 0.039 0.064 0.087 0.119 0.159 0.245 0.357 0.483 0.629 45 ° 0.021 0.039 0.064 0.087 0.119 0.159 0.245 0.357 0.483 0.629
CFM 130 170 215 255 300 345 430 515 600 685 CFM 245 325 410 490 570 655 820 980 1145 1310
40 x 4 0° 29-42 32-46 35-50 38-54
0° 10-17 12-19 14-22 17-24 20-26 22-28 24-31 26-34 29-37 32-40 14-23 17-26 20-30 22-33 24-36 26-39
21 x 4 26 x 6
0.430 Throw 221/2 ° 5-10 6-11 7-12 9-13 11-15 13-18 15-20 17-23 19-26 20-29 19 x 8 0.817 Throw 221/2 ° 8-12 10-14 12-16 14-18 16-20 18-22 20-24 22-28 24-32 26-36
14 x 6
10 x 8 16 x 10 45 ° 7-10 8-12 9-14 11-16 13-18 15-20 17-22 19-24 21-26 22-28
45 ° 4-8 5-9 6-10 7-11 8-12 9-13 10-14 11-15 12-16 13-17
13 x 12
NC <20 <20 <20 <20 23 27 35 39 41 48 NC <20 <20 <20 21 26 30 38 42 44 51
CFM 150 200 250 300 350 400 500 600 700 800 CFM 310 410 515 615 720 820 1025 1230 1435 1640
34 x 6
0° 11-18 14-21 16-23 19-25 21-27 23-29 25-32 28-35 31-38 33-41 0° 15-25 18-28 21-31 24-34 27-37 30-40 33-43 36-46 39-49 42-52
24 x 8
24 x 4 20 x 10 1.025 9-14 11-16 13-18 15-20 17-22 19-24 21-26 23-28 25-30 27-32
0.498 Throw 221/2 ° 7-11 8-12 9-13 10-14 12-17 14-19 16-21 18-24 20-27 22-30 Throw 221/2 °
16 x 6 16 x 12
45 ° 5-9 6-10 7-11 8-12 9-13 10-14 11-15 12-17 13-19 14-21 45 ° 8-12 10-14 12-16 14-18 16-20 18-22 20-24 22-26 24-28 26-30
14 x 14
NC <20 <20 <20 20 24 28 36 40 42 49 NC <20 <20 <20 22 27 31 39 43 45 52
CFM 155 205 260 310 365 415 520 620 725 830 CFM 355 475 595 715 835 950 1190 1425 1665 1905
0° 11-18 14-21 17-24 19-26 22-29 25-32 28-35 31-38 34-41 37-44 0° 18-28 21-30 24-34 27-38 30-42 33-46 36-50 39-54 43-58 47-62
38 x 6
28 x 4 1.189 25-30 27-32 29-34
0.518 Throw 221/2 ° 7-12 8-13 9-14 11-16 13-18 15-21 17-23 19-26 21-28 23-31 18 x 12 Throw 221/2 ° 10-15 13-18 15-20 17-22 19-24 21-26 23-28
18 x 6
16 x 14
12 x 8 45 ° 6-10 7-11 8-12 9-13 10-14 11-15 12-16 13-18 14-20 15-22 45 ° 9-14 11-16 13-18 15-20 17-22 19-24 21-26 23-28 25-30 27-32
10 x 10 <20 <20 <20 23 28 33 38 44 49 53
NC <20 <20 <20 20 25 29 37 41 43 50 NC
CFM 180 245 305 365 425 485 605 730 850 970 CFM 400 535 670 800 935 1070 1335 1605 1870 2135
29-37 32-40 35-43 38-46 31 x 8 0° 19-26 22-31 25-36 28-41 31-46 34-51 37-56 40-61 43-66 46-71
0° 12-19 15-22 18-25 20-28 23-31 26-34
30 x 4 25 x 10
0.607 Throw 221/2 ° 8-13 9-14 10-15 12-17 14-19 16-22 18-24 20-27 22-29 24-32 22 x 12 1.335 Throw 221/2 ° 12-18 14-20 16-22 18-24 20-26 22-28 24-30 26-32 28-34 30-36
20 x 6
14 x 8 6-11 8-12 9-13 10-14 11-15 12-16 13-17 14-19 15-21 16-23 18 x 14 45 ° 10-16 12-18 14-20 16-22 18-24 20-26 22-28 24-30 26-32 28-34
45 °
12 x 10 16 x 16
NC <20 <20 <20 20 25 29 37 41 43 50 NC <20 <20 <20 23 28 33 38 44 49 53
CFM 210 280 355 425 495 565 705 845 990 1130 CFM 545 725 905 1085 1265 1445 1810 2170 2530 2890
44 x 8
0° 13-20 16-24 19-28 21-30 24-33 27-36 30-39 34-42 38-46 41-50 36 x 10 0° 21-33 24-37 27-41 30-45 33-49 36-53 39-58 42-63 45-68 48-73
36 x 4
30 x 12 221/2 ° 19-26 21-28 23-30 25-32 27-34 29-36 31-38
22 x 6 0.706 Throw 221/2 ° 9-14 10-15 11-17 13-18 15-20 17-23 19-25 21-28 23-30 25-33 1.807 Throw 13-20 15-22 17-24
24 x 14
17 x 8 45 ° 11-17 13-19 15-21 17-23 19-25 21-27 23-29 25-31 27-33 29-35
45 ° 7-12 9-13 10-14 11-15 12-16 13-17 14-18 15-20 16-22 17-24 22 x 16
14 x 10
42 44 51 20 x 18 <20 <20 20 24 29 34 39 45 50 54
NC <20 <20 <20 21 26 30 38 NC
GRILLES & REGISTERS
Performance data obtained from tests conducted by Intertek Laboratories in accordance with ANSI/ASHRAE Performance data obtained from tests conducted by Intertek Laboratories in accordance with ANSI/ASHRAE
70-2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets” which incorporates 70-2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets” which incorporates
ADC 1062: GRD84 Test Code for Grilles, Registers and Diffusers. ADC 1062: GRD84 Test Code for Grilles, Registers and Diffusers.
56 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 57
PERFORMANCE DATA
Table 4S
Discharge 300 400 500 600 700 800 1000 1200 1400 1600
Velocity
NECK SIZE Ak
inches (ft²) 0° 0.011 0.019 0.031 0.043 0.058 0.077 0.119 0.175 0.236 0.308
(in) Pr.
Drop. 221/2 ° 0.013 0.022 0.036 0.051 0.068 0.092 0.142 0.207 0.281 0.364
45 ° 0.021 0.039 0.64 0.087 0.119 0.159 0.245 0.357 0.483 0.629
48 x 8 CFM 615 815 1020 1225 1430 1635 2045 2450 2860 3270
32 x 12 0° 23-33 27-39 31-44 35-49 39-54 43-59 47-64 51-69 55-74 59-79
27 x 14
2.042 Throw 221/2 ° 12-20 15-23 18-26 21-29 24-32 27-35 30-38 33-41 36-44 39-47
24 x 16
22 x 18 45 ° 10-17 13-20 16-24 16-27 18-30 20-33 22-35 24-38 26-41 28-44
20 x 20
NC <20 <20 20 25 30 55 40 46 51 55
48 x 10 CFM 760 1015 1270 1520 1775 2030 2535 3045 3550 4060
40 x 12 0° 24-39 28-43 33-49 37-55 40-59 43-63 48-71 54-77 60-83 66-89
36 x 14
2.537 Throw 221/2 ° 16-25 20-29 22-31 25-34 27-36 29-38 33-43 37-47 40-51 43-54
30 x 16
26 x 18 45 ° 12-22 14-26 17-28 21-31 24-33 25-35 27-38 31-42 34-46 37-49
24 x 20
NC <20 <20 21 26 31 35 41 47 52 56
CFM 920 1225 1530 1835 2145 2450 3060 3675 4285 4900
48 x 12
0° 25-45 20-49 38-55 43-60 46-64 49-69 59-75 65-81 71-86 77-91
36 x 16
32 x 18 3.061 Throw 221/2 ° 19-27 22-31 25-35 27-38 30-41 31-44 35-49 39-53 43-57 47-64
28 x 20
45 ° 13-24 15-27 18-30 22-33 25-36 27-38 29-42 33-46 36-50 39-54
24 x 24
NC <20 <20 22 27 32 36 42 48 53 57
CFM 1065 1420 1775 2130 2485 2840 3550 4260 4970 5680
48 x 14 0° 27-50 32-55 37-60 42-65 47-70 51-73 61-83 71-93 81-103 91-113
36 x 18 35-46 41-52 47-58 53-64 58-70
3.549 Throw 221/2 ° 20-31 23-33 26-37 29-40 32-43
33 x 20
28 x 24 45 ° 14-27 17-30 20-33 23-36 26-39 29-42 34-47 38-52 41-57 45-62
NC <20 <20 23 28 33 37 43 49 54 58
CFM 1260 1675 2095 2515 2935 3350 4190 5030 5865 6705
48 x 16
0° 29-54 35-60 41-66 47-72 53-78 59-84 69-94 79-104 89-114 99-124
44 x 18
38 x 20 4.190 Throw 221/2 ° 21-34 25-48 29-52 33-56 37-60 40-64 46-71 52-78 58-85 66-92
35 x 22
45 ° 15-29 18-32 21-35 21-38 27-41 30-44 36-51 42-58 48-65 56-72
31 x 24
NC <20 <20 23 28 33 37 43 49 54 58
GRILLES & REGISTERS
Performance data obtained from tests conducted by Intertek Laboratories in accordance with ANSI/ASHRAE 70-
2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets” which incorporates ADC
1062: GRD84 Test Code for Grilles, Registers and Diffusers.
58 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 59
VARIANTS VARIANTS
Supply Air Grilles and Registers with Single Deflection Blades Supply Air Grilles and Registers with Double Deflection Blades
32 20 32
32 20 32
35.8 5.7
7.8 57
7.8
Neck Size
BxA Neck Size
AxB BxA
AxB
32 20 32 32 20 32
35.8
7.8
57
5.7
7.8
Neck Size
BxA
AxB Neck Size
BxA
AxB
32 20 32
32 20 32
82
101
Neck Size
BxA
AxB
Neck Size
BxA
AxB
GRILLES & REGISTERS
32 20 32
32 20 32
82 101
60 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 61
INSTALLATION DETAILS INSTALLATION DETAILS
Wall
62 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 63
TECHNICAL DATA RETURN/EXHAUST AIR GRILLES AND REGISTERS
“Throw Distance’’ of a jet is denoted by Tv, where subscript V indicates the terminal velocity for which
the throw is given.
“Characteristic Room Length (L)’’ is the distance from the air outlet device to the nearest boundary
wall in the horizontal direction of airflow. This is based on the 9 feet standard ceiling height. If the ceiling
height is more that 9 feet, the characteristic room length (Lt=L+Lv) will be equal to the room length (L)
plus the difference (Lv) between the ceiling height and the 9 feet standard ceiling height. However, if the
airflow is directed to the opposite diffuser, the characteristics room length (Lt) is equal to one-half the
horizintal distance between two diffusers (Lh) plus the vertical distance (Lv) the mixed air jet travels
downward to reach the occupied zone (Lt=Lh+Lv).
“Terminal Velocity (Vt)’’ is the maximum sustained airstream velocity at the end of the throw (e.g. 150,
100, 50 fpm).
“Discharge or Intake Air Velocity (Vk)’’ of an outlet or inlet (fpm) is the velocity of airstream measured
at certain locations of outlet’s or inlet’s air slots.
“Area Factor (Ak)’’ of an air outlet or inlet is a factor determined from discharge or intake air velocity
(Vk) and the airflow rate (Q), Ak=Q /Vk. Description Finish:
The RAG and EAG Series return and exhaust air The standard coating finish is polyester powder
“Spread’’ grilles and registers are suitable for residential, coating, white color RAL 9010 (Code: Z0).
With the use of vertical blades, the airstream leaving the grilles or register can be adjusted to provide a commercial and industrial buildings application.
narrow concentrated air pattern or a wider air pattern. With the blades setting at 0°, the spread is This type of inlets can be installed in high sidewalls The coating finish of volume control damper is
approximately 20°, at 22 1/2° blades setting on both sides, the spread will increase at approximately angle and polyester powder coating, black color.
of 30° an at 45° blades setting on both sides, the spread will approximately 60° angle. It should be ceiling. If exposed air duct is required it can be
noted that as the angle of blades setting increases the throw distance will decrease. See Figure 1. fixed directly to duct collars either for horizontal or Optional Finish:
vertical 1. Natural anodized aluminium finish (Code: Z1).
ariflow. It is suitable for cooling, heating and 2. The power coating can be of any color if
ventilation applications. It can handle a wide range requested as specified (Code: Z2).
of airflows at high temperature differentials and
maintain a high quality of air circulation in occupied
spaces.
Standard Construction
Materials:
The frame and blades are made of extruded
aluminun alloy profiles.
GRILLES & REGISTERS
Damper:
The frame and blades are made of extruded
aluminum alloy profiles. If volume control damper
is required. It can be easily attached on the top
side of the grille by means of locking clips. The air
volume can be controlled by adjusting the damper
NOTE
blades from the face of the grille by means of a
For plenum box ordering, see Page 39. screw driver.
SAFID Return/Exhaust Air Grilles/Registers RAG/EAG Series,1000X500 and 600X300 are tested by Intertek Labo-
ratories in accordance with ANSI/ASHRAE 70-2006 Standard “Method of Testing for Rating the Performance of Air
Outlets and Inlets” which incorporates ADC 1062: GRD84 Test Code for Grilles, Registers and Diffusers.
64 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 65
RETURN/EXHAUST AIR GRILLES WITH RETURN/EXHAUST AIR GRILLES WITH HORIZONTAL
HORIZONTAL FIXED BLADES AT 40° FIXED BLADES AT 40° WITH VOLUME DAMPER
RAG/EAG SERIES [RAG 211, EAG 211] RAG/EAG SERIES [RAG 211 - V, EAG 211 - V]
Dimensions Dimensions
Model: RAG 211, EAG 211 Model: RAG 211 - V, EAG 211 - V
Neck Size Airflow Neck Size Airflow Neck Size Airflow Neck Size Airflow
AxB Range AxB Range AxB Range AxB Range
(in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM)
10 x 6 250 x 150 75 - 213 32 x 10 800 x 250 400 - 1133 10 x 6 250 x 150 75 - 213 32 x 10 800 x 250 400 - 1133
12 x 6 300 x 150 90 - 255 36 x 10 900 x 250 450 - 1275 12 x 6 300 x 150 90 - 255 36 x 10 900 x 250 450 - 1275
16 x 6 400 x 150 120 - 340 40 x 10 1000 x 250 500 - 1417 16 x 6 400 x 150 120 - 340 40 x 10 1000 x 250 500 - 1417
18 x 6 450 x 150 135 - 383 12 x 12 300 x 300 180 - 510 18 x 6 450 x 150 135 - 383 12 x 12 300 x 300 180 - 510
20 x 6 500 x 150 150 - 425 18 x 12 450 x 300 270 - 765 20 x 6 500 x 150 150 - 425 18 x 12 450 x 300 270 - 765
24 x 6 600 x 150 180 - 510 24 x 12 600 x 300 360 - 1020 24 x 6 600 x 150 180 - 510 24 x 12 600 x 300 360 - 1020
30 x 6 750 x 150 225 - 638 30 x 12 750 x 300 450 - 1275 30 x 6 750 x 150 225 - 638 30 x 12 750 x 300 450 - 1275
36 x 6 900 x 150 270 - 765 36 x 12 900 x 300 540 - 1530 36 x 6 900 x 150 270 - 765 36 x 12 900 x 300 540 - 1530
12 x 8 300 x 200 120 - 340 40 x 12 1000 x 300 600 - 1700 12 x 8 300 x 200 120 - 340 40 x 12 1000 x 300 600 - 1700
16 x 8 400 x 200 160 - 453 16 x 16 400 x 400 320 - 907 16 x 8 400 x 200 160 - 453 16 x 16 400 x 400 320 - 907
18 x 8 450 x 200 180 - 510 20 x 16 500 x 400 400 - 1133 18 x 8 450 x 200 180 - 510 20 x 16 500 x 400 400 - 1133
GRILLES & REGISTERS
66 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 67
PERFORMANCE DATA PERFORMANCE DATA
Table 1R Table 2R
NECK SIZE Ak Intake 300 400 450 500 550 600 650 700 750 800 850 NECK SIZE Ak Intake 300 400 450 500 550 600 650 700 750 800 850
(ft²) Velocity (ft²) Velocity
inches inches
(in) Static Press. 0.018 0.032 0.044 0.052 0.064 0.072 0.088 0.099 0.112 0.128 0.156 (in) Static Press. 0.018 0.032 0.044 0.052 0.064 0.072 0.088 0.099 0.112 0.128 0.156
CFM 75 100 113 125 138 150 163 175 188 200 213 CFM 300 400 450 500 550 600 650 700 750 800 850
10 x 6 0.25 30 x 8 1.00
NC <20 <20 <20 <20 <20 21 23 25 28 30 33 NC <20 <20 <20 23 26 29 31 34 36 38 40
CFM 90 120 135 150 165 180 195 210 225 240 255 CFM 360 480 540 600 660 720 780 840 900 960 1020
12 x 6 0.30 36 x 8 1.20
NC <20 <20 <20 <20 21 22 24 26 29 31 34 NC <20 <20 21 24 27 30 33 35 37 39 41
CFM 120 160 180 200 220 240 260 280 300 320 340 CFM 150 200 225 250 275 300 325 350 375 400 425
16 x 6 0.40 12 x 10 0.50
NC <20 <20 <20 <20 22 24 26 29 30 32 35 NC <20 <20 22 23 25 27 30 33 35 37 39
CFM 135 180 203 225 248 270 293 315 338 360 383 CFM 225 300 338 375 413 450 488 525 563 600 638
18 x 6 0.45 18 x 10 0.75
NC <20 <20 <20 <20 23 25 27 30 31 33 36 NC <20 20 22 25 27 30 32 34 36 38 40
CFM 150 200 225 250 275 300 325 350 375 400 425 CFM 250 333 375 417 458 500 542 583 625 667 708
20 x 6 0.50 20 x 10 0.83
NC <20 <20 <20 20 23 26 28 31 32 34 37 NC <20 20 23 26 28 31 33 35 37 39 41
CFM 180 240 270 300 330 360 390 420 450 480 510 CFM 300 400 450 500 550 600 650 700 750 800 850
24 x 6 0.60 24 x 10 1.00
NC <20 <20 20 21 24 26 29 32 34 35 38 NC <20 21 24 27 29 32 34 36 38 41 42
CFM 225 300 338 375 413 450 488 525 563 600 638 CFM 375 500 563 625 688 750 813 875 938 1000 1063
30 x 6 0.75 30 x 10 1.25
NC <20 <20 <20 22 25 27 30 32 35 36 38 NC <20 22 25 28 30 33 35 37 39 42 43
CFM 270 360 405 450 495 540 585 630 675 720 765 CFM 400 533 600 667 733 800 867 933 1000 1067 1133
36 x 6 0.90 32 x 10 1.33
NC <20 <20 <20 23 26 28 31 33 36 37 39 NC <20 22 25 28 31 34 36 38 40 43 44
CFM 120 160 180 200 220 240 260 280 300 320 340 CFM 450 600 675 750 825 900 975 1050 1125 1200 1275
12 x 8 0.40 36 x 10 1.50
NC <20 <20 <20 <20 22 24 27 30 32 33 36 NC <20 24 27 29 32 35 37 39 41 44 45
CFM 160 213 240 267 293 320 347 373 400 427 453 CFM 500 667 750 833 917 1000 1083 1167 1250 1333 1417
16 x 8 0.53 40 x 10 1.67
NC <20 <20 <20 <20 23 25 28 31 33 34 37 NC 22 25 28 30 33 36 38 40 42 45 46
CFM 180 240 270 300 330 360 390 420 450 480 510 CFM 180 240 270 300 330 360 390 420 450 480 510
18 x 8 0.60 12 x 12 0.60
NC <20 <20 <20 20 24 26 29 32 34 36 38 NC <20 <20 <20 21 25 27 29 31 34 36 38
CFM 200 267 300 333 367 400 433 467 500 533 567 CFM 270 360 405 450 495 540 585 630 675 720 765
20 x 8 0.67 18 x 12 0.90
NC <20 <20 <20 21 24 26 30 33 35 37 39 NC <20 <20 <20 23 26 29 32 35 38 41 44
CFM 240 320 360 400 440 480 520 560 600 640 680 CFM 360 480 540 600 660 720 780 840 900 960 1020
24 x 8 0.80 24 x 12 1.20
NC <20 <20 <20 22 25 27 31 34 36 38 40 NC <20 <20 22 25 28 31 34 37 40 43 46
GRILLES & REGISTERS
Performance data obtained from tests conducted by Intertek Laboratories in accordance with ANSI/ASHRAE Performance data obtained from tests conducted by Intertek Laboratories in accordance with ANSI/ASHRAE
70-2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets” which incorporates 70-2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets” which incorporates
ADC 1062: GRD84 Test Code for Grilles, Registers and Diffusers. ADC 1062: GRD84 Test Code for Grilles, Registers and Diffusers.
68 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 69
PERFORMANCE DATA PERFORMANCE DATA
Table 3R Variants
NECK SIZE Ak Intake 300 400 450 500 550 600 650 700 750 800 850
(ft²) Velocity
inches
Model: RAG 211, EAG 211
(in) Static Press. 0.018 0.032 0.044 0.052 0.064 0.072 0.088 0.099 0.112 0.128 0.156
With horizontal fixed blades at 40°.
CFM 450 600 675 750 825 900 975 1050 1125 1200 1275
30 x 12 1.50
NC <20 <20 23 26 29 31 34 36 38 40 42
CFM 540 720 810 900 990 1080 1170 1260 1350 1440 1530
36 x 12 1.80
NC <20 <20 24 27 30 32 35 37 39 41 43
CFM 600 800 900 1000 1100 1200 1300 1400 1500 1600 1700
40 x 12 2.00
NC <20 20 25 27 31 33 36 38 40 42 44
CFM 320 427 480 533 587 640 693 747 800 853 907
16 x 16 1.07
NC <20 <20 20 23 27 29 32 34 36 38 40
CFM 400 533 600 667 733 800 867 933 1000 1067 1133
20 x 16 1.33
NC <20 <20 22 25 28 30 33 35 37 39 41
CFM 480 640 720 800 880 960 1040 1120 1200 1280 1360
24 x 16 1.60
NC <20 <20 23 26 29 31 34 36 38 40 42
CFM 640 853 960 1067 1173 1280 1387 1493 1600 1707 1813
32 x 16 2.13
NC <20 <20 24 27 30 32 35 37 39 41 43 Model: RAG 211 - V, EAG 211 - V
CFM 800 1067 1200 1333 1467 1600 1733 1867 2000 2133 2267 With horizontal fixed blades at 40° with volume control damper.
40 x 16 2.67
NC <20 22 25 29 32 35 37 39 41 43 46
CFM 960 1280 1440 1600 1760 1920 2080 2240 2400 2560 2720
48 x 16 3.20
NC <20 23 26 30 33 36 38 40 42 44 47
CFM 500 667 750 833 917 1000 1083 1167 1250 1333 1417
20 x 20 1.67
NC <20 <20 23 26 29 31 34 36 38 40 42
CFM 600 800 900 1000 1100 1200 1300 1400 1500 1600 1700
24 x 20 2.00
NC <20 <20 24 27 30 32 35 37 39 41 43
CFM 800 1067 1200 1333 1467 1600 1733 1867 2000 2133 2267
32 x 20 2.67
NC <20 22 25 29 32 35 37 39 41 43 46
CFM 1000 1333 1500 1667 1833 2000 2167 2333 2500 2667 2833
40 x 20 3.33
NC <20 23 26 30 33 36 38 40 42 44 47
CFM 1200 1600 2000 2400 2800 3000 3200 3400 3600 3800 4000
48 x 20 4.00
NC <20 24 28 31 35 37 39 41 43 45 48
GRILLES & REGISTERS
Performance data obtained from tests conducted by Intertek Laboratories in accordance with ANSI/ASHRAE
70-2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets” which incorporates
ADC 1062: GRD84 Test Code for Grilles, Registers and Diffusers.
70 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 71
INSTALLATION DETAILS INSTALLATION DETAILS
Wall
72 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 73
SUPPLY, RETURN AND EXHAUST AIR
NON VISION TRANSFER AIR GRILLES
REGISTER ACCESORIES
AxB
Description Finish:
The TAG Series non vision transfer air grilles are The standard coating finish is polyester powder
applicable not only as toilet door grilles. It is also coating, white color RAL 9010 (Code: Z0).
51.92
applicable in use as wall or partition transfer grilles
where cold air or return air can be transfered to the Optional Finish:
adjacent room. The frame and blades construction 1. Natural anodized aluminium finish (Code: Z1).
are designed to match the interior architectural 2. The powder coating can be of any color if
design of any occupied rooms. requested as specified (Code: Z2).
Neck Size Neck Size Neck Size Neck Size Standard Construction
AxB AxB AxB AxB
Materials:
(in) (mm) (in) (mm) (in) (mm) (in) (mm)
The frame and blades are made of extruded
8x4 200 x 100 22 x 6 550 x 150 36 x 10 900 x 250 30 x 16 750 x 400 aluminum alloy profiles. The extruded aluminum
10 x 4 250 x 200 26 x 6 650 x 150 48 x 10 1200 x 250 36 x 16 900 x 400 blades have a V-shape profile that gives the grille
12 x 4 300 x 100 34 x 6 850 x 150 13 x 12 325 x 300 48 x 16 1200 x 400 a non vision advantage compared to ordinary air
grilles.
16 x 4 400 x 100 38 x 6 950 x 150 16 x12 400 x 300 20 x 18 500 x 450
18 x 4 450 x 100 8x8 200 x 200 18 x 12 450 x 300 22 x 18 550 x 450
21 x 4 525 x 100 10 x 8 250 x 200 22 x 12 550 x 300 26 x 18 650 x 450
GRILLES & REGISTERS
74 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 75
NON VISION TRANSFER AIR GRILLES NON VISION TRANSFER AIR GRILLES
WITH HORIZONTAL FIXED BLADES AT 40° WITH HORIZONTAL FIXED BLADES AT 40°
TAG SERIES [TAG 311, TAG 312] TAG SERIES [TAG 311, TAG 312]
Dimensions Dimensions
Neck Size Airflow Neck Size Airflow Neck Size Airflow Neck Size Airflow
AxB Range AxB Range AxB Range AxB Range
(in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM) (in) (mm) (CFM)
12 x 4 300 x 100 35 - 80 24 x 8 600 x 200 190 - 410 12 x 4 300 x 100 35 - 80 24 x 8 600 x 200 190 - 410
16 x 4 400 x 100 50 - 105 32 x 8 800 x 200 255 - 550 16 x 4 400 x 100 50 - 105 32 x 8 800 x 200 255 - 550
20 x 4 500 x 100 60 - 135 12 x 12 300 x 300 145 - 320 20 x 4 500 x 100 60 - 135 12 x 12 300 x 300 145 - 320
24 x 4 600 x 100 75 - 165 16 x 12 400 x 300 200 - 430 24 x 4 600 x 100 75 - 165 16 x 12 400 x 300 200 - 430
32 x 4 800 x 100 100 - 220 20 x 12 500 x 300 250 - 545 32 x 4 800 x 100 100 - 220 20 x 12 500 x 300 250 - 545
GRILLES & REGISTERS
76 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 77
PERFORMANCE DATA PERFORMANCE DATA
Table 1T Table 2T
78 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 79
VARIANTS INSTALLATION DETAILS
Fixing Details
Standard Fixing:
Fixing type S
With ø4mm holes on flange for
self tapping screw. Self tapping
screw by others.
Optional Fixing:
Fixing type O
Without holes on flange.
Standard Fixing:
Fixing type S
With ø4 mm holes on flange for
self tapping screw. Self tapping
screw by others.
GRILLES & REGISTERS
80 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 81
SELECTION PROCEDURE ORDER REFERENCE DETAILS
Order Details
Required: Specifications:
Size of supply and return air registers. 1. Supply air grille with individually adjustable front horizontal blades and rear vertical blades
with power coating white color RAL 9010.
Solution: Neck size = 350 x 200
During cooling due to supply air and room air temperature difference, the throw distance of isothermal 2. Supply air register with individually adjustable front horizontal blades and rear vertical blades
air will be reduced. In general the acceptable isothermal throw ratios (Tv/L) can vary from 1.5 to 1.8 with powder coating white color RAL 9010 and with opposed blades volum control damper
times the characteristics room length (L). Neck size = 350 x 200
3. Non vision transfer air grille with fixed frame on one side and removable frame on other side,
Calculations: with powder coating white color RAL 9010.
The characteristics room length (L) is 20 feet. Neck size = 400 x 200
GRILLES & REGISTERS
82 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 83
CIRCULAR GRILLES
Description Ordering:
The HC Series supply circular grilles has been designed Product code: HC - 305
for commercial and industrial buildings application. This Type
type of outlets can be installed directly in sidewalls.
It is suitable for cooling, heating and ventilation
applications. It can handle a wide range of airflows at
high temperature differentials and maintain a high quality
of air diffusion in occupied spaces. Dimensions
Materials:
The blades are made of extruded aluminum alloy
profiles, while the frame is formed of aluminum alloy.
25
The extruded aluminum blades are mounted in the
1
Finish:
GRILLES & REGISTERS
84 Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved Right to alterations reserved. SAFID is a registered trademark. © Copyright 2018. All rights reserved 85