Professional Documents
Culture Documents
PT380 OP-138-V02 - Instruction - Manual
PT380 OP-138-V02 - Instruction - Manual
2. Left 2 digits of the display show the channel no. Cascade output is valid only in case of Serial
and the other 4 digits show the elapsed time. function. In Serial continuous cycle mode, the
cascade output remains de-activated. In Serial 3. Cyclic ON - First
Select program no. to be run selectable cycle mode, after the end of the set no.
of cycles, the cascade output will be activated.
RUN Supply
1. Press momentarily to enter RUN mode. Serial (with cascading )
2. Press key each time to select the required Start
Start Signal
RST Reset
program no. and press
ch-1 Timer 1
Now give Start pulse.
Running program cannot be changed once the ch-n Output Tstrt Ton Toff Ton Toff Tstrt Ton Toff
Reset
channel-2 Selec Controls Pvt. Ltd.
Tel. No. : +91-22-40394200 / 40394202
channel- n Output Tstrt Toff Ton Toff Ton Toff tstrt Toff Ton Fax No. : +91-22-28471733 I Toll free : 1800 227 353
Website: www.selec.com I Email: sales@selec.com
Doc. Name: Operating/1105/PT380 OP138-V02 (Page 3 of 3)