Literature Study

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

ARCHITECTURAL DESIGN-5

SITE LOCATION AND CONNECTIVITY

According to censes 2021,hyderabads among the top 10 dense cities of India. Also, the city is one of the major technological hub of India, along
with Bangalore, with many IT companies. Hyderabad is an epicentre of work oriented public who accomplish their demanding schedule and drive
toward malls as a recreational zone.

Kukatpally is a neighbourhood of Hyderabad in the Indian state of Telangana. It is the mandal headquarters of Kukatpally mandal in Malkajgiri
revenue division of Medchal district. It was a municipality prior to its merger into the Greater Hyderabad Municipal Corporation. New road
connectivity and consequent proximity to the Information Technology hub of Hitech city has made Kukatpally area, a functional dream home.

Site Regulation
Minimum abutting existing road width :18m Permissible building
height : 30m
Stilt Floor meant for parking is excluded from the permissible height.
Building setback : 12 m front & 10m side
•No balcony projections or corridor shall be permitted projecting
within the mandatory open spaces.
•The setbacks are to be left after leaving the affected area of the
plot / site.
•A strip of at least 1m greenery / lawn along the frontage of the site
within the front setback shall be developed and maintained with
greenery.
•For Plots above 300sq.m, a minimum 1m wide continuous green planting
NARALA DEEPAK
strip in the periphery on remaining sides are required to be developed
and maintained within the setback. 19181-AA-052
Parking Requirements: 60% of the build-up area SHEET-0
ARCHITECTURAL DESIGN-5

NARALA DEEPAK
19181-AA-052
SHEET-0
ARCHITECTURAL DESIGN-5

NARALA DEEPAK
19181-AA-052
SHEET-0
ARCHITECTURAL DESIGN-5

NARALA DEEPAK
19181-AA-052
SHEET-0
ARCHITECTURAL DESIGN-5
LITERATURE STUDY THEATRE

ACOUSTICS
-The ceiling should feature sound-directing surfaces with low
acoustic delay difference time.
-The reverberation time can increase with growing
auditorium volume.
- The rear wall behind the last row of seats should have an
insulated surface to prevent echo
- Loudspeakers are distributed in the auditorium so that the
difference in volume between the front and back rows does
not exceed 4 dB.

-Distance of the screen is decided according to cinema size and


system and then setting up of the sound system.
-The screen is perforated (sound-permeable).
-Retracting blinds or curtains restrict the screen at the sides with SEATING ARRANGEMENTS
the same picture height.
-Large screens are curved in a radius centred on the back row
of seats.
-The lower edge of the screen should be min. 1.20 m above the
floor -

S. ADITHI
19181-AA-071
SHEET-02

You might also like