Materials Engineer Review Notes

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 12

VOLUME II

STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS

PART A – FACILITIES FOR THE ENGINEER 309 Bituminous Plant-Mix Surface (Stockpile Maintenance Mixture)
310 Bituminous Concrete Surface Course, Hot Laid
PART B – OTHER GENERAL REQUIREMENTS 311 Portland Cement Concrete Pavement
313 Rock Asphalt, Hot Laid
PART C – EARTHWORKS (100 – 107)
100 Clearing and Grubbing PART F – BRIDGE CONSTRUCTION (400-416)
101 Removal of Structures and Obstructions 400 Piling
102 Excavation 401 Railing
103 Structural Excavation 402 Timber Structures
104 Embankment 403 Metal Structures
105 Subgrade and Preparation 404 Reinforcing Steel
106 Compaction Equipment and Density Control Strips 405 Structural Concrete
107 Overhaul 406 Prestressed Concrete Structures
407 Concrete Structures
PART D – SUBBASE AND BASE COURSE (200 – 208) 408 Steel Bridges
200 Aggregate Subbase Course 409 Welded Structural Steel
201 Aggregate Base Course 410 Treated and Untreated Timber
202 Crushed Aggregate Base Course 411 Paint
203 Lime Stabilized Road Mix Base Course 412 Elastomeric Bearing Pad
204 Portland Cement Stabilized Road Mix Base Course 413 Pre-Molded Joint Filler for Concrete Paving and Structural
205 Asphalt Stabilized Road Mix Base Course Construction
206 Chemically Stabilized Road Mix Subbase/Base Course 414 Forms and Falseworks
207 Portland Cement Treated Plant Mix Base Course 415 Elastomeric, Hot-Applied Joint Sealant with Single-Sized Aggregates for Bridge Expansion Joints

208 Aggregate Stockpile 416 Carbon Fiber

PART E – SURFACE COURSES (300-313; no 312) PART G – DRAINAGE AND SLOPE PROTECTION (500-520; 517 then 520)
300 Aggregate Surface Coat 500 Pipe Culverts and Storm Drains
301 Bituminous Prime Coat 501 Underdrains
302 Bituminous Tack Coat 502 Manholes, Inlets and Catch Basins
303 Bituminous Seal Coat 503 Drainage Steel Grating with Frame
304 Bituminous Surface Treatment 504 Cleaning and Reconditioning Existing Drainage Structures
304A Slurry System for Road Surface Treatment 505 Riprap and Grouted Riprap
305 Bituminous Penetration Macadam Pavement 506 Stone Masonry
306 Bituminous Road Mix Surface Course 507 Rubble Concrete
307 Bituminous Plant-Mix Surface Course – General 508 Hand-Laid Rock Embankment
308 Bituminous Plant-Mix Surface Course, Cold Laid 509 Sheet Piles
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
510 Concrete Slope Protection 704 Masonry Units
511 Gabions and Mattresses 705 Joint Materials
512 Erosion Control Mats, Roving and Cellular Confinement System 706 Concrete Clay, Plastic and Fiber Pipe
513 Permanent Ground Anchors 707 Metal Pipe
514 Shotcrete (Concrete Spray) 708 Chemical Admixture for Concrete
515 Mechanically-Stabilized Earth (MSE) Retaining Walls 709 Paints
516 Wet Stone Masonry (Cobble Stone) 710 Reinforcing Steel and Wire Rope
517 Drain Pipe 711 Fence and Guardrail
520 Hydroseeding 712 Structural Metal
713 Treated and Untreated Timber
PART H – MISCELLANEOUS STRUCTURES 714 Water
(600-622; 614 then 618, 620 & 622) 715 Geotextiles
600 Curb and/or Gutter 716 Drilling Slurry
601 Sidewalk 719 Epoxy-Resin-Base Bonding System for Concrete
602 Monuments, Markers and Guard Posts 726 Coal Tar Surface Treatment
603 Guardrails 727 Non-shrink Grout
604 Fencing 729 Protective Coating for Concrete
605 Road Sign 733 Zinc (Hot-Dip Galvanized Coatings on Iron and Steel Products)
606 Pavement Markings 734 Stone Mastic Asphalt
607 Reflective Pavement Studs 735 Porous Asphalt Mixture
608 Topsoil
609 Sprigging
610 Sodding
611 Tree Planting
612 Reflective Thermoplastic Stripping Material (Solid Form)
613 Concrete Joint Sealant (Hot-Poured Elastic and Cold Applied Types)
614 Waterstops
618 Reflectorized Thermoplastic Rumble Strips
620 Chevron Signs
622 Coconet Bio-Engineering Solutions

PART I – MATERIALS DETAILS


(700-735; 716 then, 719, 726, 727, 729, 733-735)
700 Hydraulic Cement
701 Construction Lime (Hydrated)
702 Bituminous Materials
703 Aggregates
703A Mineral Fillers
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS

* Government expense if errors are from Engineer’s initial


references

PART A – FACILITIES FOR THE ENGINEER PART C – EARTHWORKS

100 Clearing and Grubbing


1 Engineer’s Compound
Office including furniture, appliances and equipment Lump sum 100 (1) Clearing and Grubbing Hectare
100 (2) Clearing and Grubbing Lump sum
Laboratory including furniture, appliances and equipment 100 (3) Individual Removal of Trees, Small Each
(150mm to 900mm)
Survey equipment 100 (4) Individual Removal of Trees, Large (>900mm) Each

101 Removal of Structures and Obstructions


2 Maintenance of office and laboratory Month
3 Consumables (deemed included on others) No Pay Item 101 (1) Removal of Actual Structures and Obstructions Lump sum
4 Vehicles Each 101 (2) Removal of Actual Structures and Obstructions Each
5 Vehicle operations Month 101 (3) Removal of Actual Structures and Obstructions Square meter
6 Progress photograph Each 101 (4) Removal of Actual Structures and Obstructions Linear meter

PART B – OTHER GENERAL REQUIREMENTS


* Subsidiary obligation if not on Pay Item

B.1 Contractor’s compound - 102 Excavation


Office, stores, workshops, latrines, accommodations,
including fencing 102 (1) Unsuitable Excavation Cubic meter
No provision for Contractor’s compound (net volume in original position)
B.2 and B.3 Medical room, first aid facilities; and No Pay Item 102 (2) Surplus Common Excavation Cubic meter
Medical Aide (deemed included on others) 102 (3) Surplus Rock Excavation Cubic meter
102 (4) Surplus Unclassified Excavation Cubic meter
B.4 Construction Survey and Staking

B.4 (1) Construction survey and staking Kilometer * Surplus suitable = Suitable required – suitable from
excavation
B.4 (2) Slope, reference and C&G stakes Kilometer
* Cost includes land obtaining and disposal
B.4 (3) Centerline re-establishment Kilometer
B.4 (4) Culvert survey and staking Each * Separate Pay Item for excess roadway or borrow
B.4 (5) Bridge survey and staking Lump sum excavation
B.4 (6) Retaining wall survey and staking Lump sum
B.4 (7) Grade finishing stakes Kilometers 103 Structural Excavation
(one-time measurement only)
B.4 (8) Permanent monuments and markers Each 103 (1) Structure Excavation Cubic meter
B.4 (9) Miscellaneous survey and staking Hour Don’t include:
Beyond 450mm neat line offset; for separate pay items
B.4 (10) Miscellaneous survey and staking Lump sum
(culvert excavation, roadway excavation, excavation of
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
undisturbed ground before taking elevations, FTG with d * Subsidiary obligation if not on Pay Item
>1.5m); water; rehandled materials; concrete
103 (2) Bridge Excavation Cubic meter PART D – SUBBASE AND BASE COURSE
(inside 450mm neat lines)
103 (3) Foundation Fill Cubic meter
103 (4) Excavation ordered below plan elevation Cubic meter 200 Aggregate Subbase Course Cubic meter
(also, deeper than 1.5m, for Part K) 201 Aggregate Base Course Cubic meter
103 (5) Shoring, cribbing and related work Lump sum 202 Crushed Aggregate Base Course Cubic meter
(also, deeper than 1.5m, for Part K) 203 Lime-Stabilized Road Mix Base Course Cubic meter
103 (6) Pipe culverts and drain excavation Cubic meter (New or Salvaged Soil-Aggregate)
204 Portland Cement Stabilized Road Mix Base Course (New or Cubic meter
* Includes backfilling and disposal Salvaged Soil-Aggregate)
205 Asphalt Stabilized Road Mix Base Course Cubic meter
* Separate Pay Item for excess roadway or borrow (New or Salvaged Soil-Aggregate)
excavation
Chemically Stabilized Road Mix Subbase/ Base Course
206 Polymer-Based Chemical Soil Additive Liter
104 Embankment
207 Portland Cement Treated Plant Mix Base Course (New or Cubic meter
104 (1) Embankment Cubic meter Salvaged Soil-Aggregate)
104 (2) Selected Borrow for topping, Case 1 Cubic meter 208 Aggregate Stockpile (average end area method) Cubic meter
104 (3) Selected Borrow for topping, Case 2 Cubic meter
104 (4) Earth Berm Meter * Includes compaction
PART E – SURFACE COURSE
* Includes compaction

105 Subgrade Preparation 300 Aggregate Surface Course Cubic meter


300 (1) Gravel Surface Course
105 (1) Subgrade Preparation (Common Material) Square meter 300 (2) Crushed Aggregate Surface Course
105 (2) Subgrade Preparation (Existing Pavement) Square meter
105 (3) Subgrade Preparation (Unsuitable Material) Square meter
301 Bituminous Prime Coat Square meter
* Includes compaction 301 (1) MC – Cut-back Asphalt
302 (2) RC – Cut-back Asphalt
106 Compaction Equipment and Density Control Strips
106.4 Incidental to work item. Trial sections included in BOQ will only be paid once
302 Bituminous Tack Coat Square meter
107 Overhaul
301 (1) RC – Cut-back Asphalt
107 (1) Overhaul Cubic meter - 302 (2) Emulsified Asphalt
(no Overhaul for excavations) kilometer
107 (2) Overhaul of Borrow, Case 1 Cubic meter -
(no Case 2 – Borrow chosen by contractor) kilometer 303 Bituminous Seal Coat Tonne
303 (1) Cover Aggregate, Type ___
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
303 (2) MC ___ Cut-back Asphalt Brgy Roads
303 (3) RC ___ Cut-back Asphalt
303 (4) Asphalt Cement Penetration Grade 308 Bituminous Plant Mix Surface Course, Cold Laid Square meter

* No deduction in bituminous material


304 Bituminous Surface Treatment Tonne
304 (1) Aggregate Grading * Batch weights are not permitted as method of
measurement
304 (2) Asphalt Cement Penetration Grade
304 (3) RC ___ Cut-back Asphalt
309 Bituminous Plant Mix Surface Course, Stockpile Cubic meter
304 (4) MC ___ Cut-back Asphalt Maintenance Mixture
304 (5) Emulsified Asphalt

310 Bituminous Concrete Surface Course, Hot Laid Square meter


304A (1) Slurry Surface Treatment (SST) Square meter 310 (1) Asphaltic Concrete with Lahar as Fine Aggregate
304A (2) Slurry Seal Square meter Replacement
304A (3) Micro-surfacing Square meter Hot Rolled Asphalt with Lahar as Fine Aggregate
Replacement

305 Bituminous Penetration Macadam Pavement Tonne


305 (1) Aggregates 311 Portland Cement Concrete Pavement Square meter
311 (1) Unreinforced
305 (2) Asphalt Cement
311 (2) Reinforced
305 (3) RC ___ Cut-back Asphalt
311 (3) Reinforced with Wire Mesh
305 (4) Emulsified Asphalt
311 (4) Unreinforced with Coralline Materials as Coarse Aggregate
311 (5) Reinforced with Coralline Materials as Coarse Aggregate
306 Bituminous Road Mix Surface Course Tonne
311 (6) Unreinforced with Dolomites as Aggregates
306 (1) Aggregate
311 (7) Reinforced with Dolomites as Aggregates
306 (2) Bituminous Material

* Accepted in lot:
* Less aggregate moisture weight • 1000 l.m per lane
* Different Gs, but no unit cost adjustment • 500 l.m per two lanes
• L < ½ lot, include in previous
• L > ½ lot, add 1 lot
307 Bituminous Plant Mix Surface Course – General Square meter • Other areas to be included in 1 lot
* Adjusted acdg to actual strength and thk

* Asphalt grade may be changed 1 step w/o change in unit * No acceptance and final payment until thickness test,
cost except brgy roads
* No acceptance and final payment until test passed, except * Don’t include curb and gutter
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
403 (1) Structural Steel, furnished, fabricated and erected

313 Rock Asphalt, Hot Laid Square meter 403 (2) Structural Steel, furnished, fabricated and erected
PART F – BRIDGE CONSTRUCTION 403 (3) Structural Steel, furnished, fabricated
400.5 Piles
403 (4) Structural Steel, furnished, fabricated
400 (1) Untreated Timber Piles, furnished Meter 403 (5) Structural Steel erected
400 (2) Treated Timber Piles, preservative, furnished Meter 403 (6) Structural Steel erected
400 (3) Steel H-Piles, furnished Meter
400 (4) Precast Concrete Piles, furnished Meter 403 (7) Structural Steel, furnished, fabricated and erected
400 (5) Precast, Prestressed Concrete Piles, furnished Meter
400 (6) Structural Steel Sheet Piles, furnished Meter
* Falseworks are incidental
400 (7) Precast Concrete Sheet Piles, furnished Meter
400 (8) Untreated Timber Piles, driven Meter * Unit Basis (kilograms) or Lump Sum basis
400 (9) Treated Timber Piles, driven Meter * Other metal structures not on Pay Item, include here
400 (10) Steel H-Piles, driven Meter
* No separate Pay Item for tests
400 (11) Steel Pipes Pile Meter
400 (12) Structural Steel Sheet Piles, driven Meter * When BOQ does not contain a Pay Item for structural steel,
400 (13) Precast Concrete Sheet Piles, driven Meter provided will be paid as Item 404, Reinforcing Steel
400 (14) Precast Concrete Piles, driven Meter
400 (15) Precast, Prestressed Concrete Piles, driven Meter
404 Reinforcing Steel Kilograms
400 (16) Test Piles, furnished and driven Meter
400 (17) Concrete Piles cast in Drilled Holes Meter
400 (18) Concrete Piles cast in Steel Shells Meter * When BOQ does not contain a Pay Item for structural
400 (19) Concrete Piles cast in Steel Pipes Meter steel, provided will be paid as Item 404, Reinforcing Steel
400 (20) Pile Shoes Each * No allowance for tie wires, chair bars and likes
400 (21) Splices Each * No payment for splices by Contractor
400 (22) Load Tests Each
400 (23) Bored Piles (dia. ___ m) Meter
400 (24) Permanent Casing (dia. ___ m) Meter
405 Structural Concrete Cubic meter
405 (1) Class A
* Added length without added compensation
405 (2) Class B
405 (3) Class C
401 Railing Meter 405 (4) Class P
405 (5) Seal Concrete
402 (1) Timber Structures Span
* No deduction on rebars, conduits, weepholes, joint
* Bracings are incidentals materials and pipes (< 100mm diam)

406 Prestressed Concrete Structures


403 Metal Structures Kilogram
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
406 (1) Prestressed Structural Concrete Members (Identification) Each
406 (2) Prestressed Concrete Lump sum
412 Elastomeric Bearing Pad Each

* Piling, as per Item 400


* Includes all Material Requirements 413 Preformed Sponge Rubber and Cork Joint Expansion Fillers for
Concrete Paving and Structural Construction NONE

407 Concrete Structures


405 (1) Concrete Class A, C & P Cubic meter 414 Forms and Falseworks Lump sum
405 (2) Concrete Post / Baluster Railings Each
405 (3) Parapet Walls Cubic meter
* Subsidiary obligation if not on Contract
400 Piling Linear meter
103 Structure Excavation Cubic meter
601 Sidewalk Concrete Square meter or
415 Elastomeric, Hot-Applied Joint Sealant with Single Sized Cubic meter
Cubic meter
Aggregates for Bridge Expansion Joints
404 Reinforcing Steel Bars Kilogram
407 (1) Lean Concrete Cubic meter
416 Carbon Fiber (Thk in mm) Square meter
* Forms and falseworks are incidental

PART G – DRAINAGE AND SLOPE PROTECTION


408.4 Steel Bridges

* Shall be measured for payment in several items involved.


500 Pipe Culverts and Storm Drain Linear meter
* No allowance for cofferdam, falsework and other 500 (1) Pipe Culverts, -mm, Class -
expenses
500 (2) Storm Drain, -mm, Class -

409.4 Welded Structural Steel * Sections are measured by number of units Units
Shall not be measured unless provided in Special Provisions * Class A bedding, cu.m, under Item 103
* Connections are included in linear meter
* Backfill, cu.m in place, under Item 103
410 Treated and Untreated Timber Cubic meter
* If backfill is not on schedule, payment will be considered
410 (1) Timber
included in excavation of backfill material
410 (2) Treated Timber

501 Underdrains
* Measurement will not include falsework and likes
501 (1) Underdrain, -mm Linear meter
501 (2) Blind drain Linear meter
411.4 Paint 501 (3) Granular backfill filter material for underdrain Cubic meter
Shall not be measured
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
502 Manholes, Inlets and Catch Basins 505 (4) Riprap, Class D
502 (1) Manholes (incl. Junction Box) Each 505 (5) Grouted Riprap, Class A
502 (2) Inlets, type Each 505 (6) Grouted Riprap, Class B
502 (3) Catch basins Each
502 (4) Concrete covers Each 505 (7) Grouted Riprap, Class C
502 (5) Metal frames and gratings, type Pair 505 (8) Grouted Riprap, Class D
502 (6) Metal frames and covers Pair
505 (9) Filter layer of granular material
502 (7) Adjusting manholes Each
502 (8) Adjusting catch basins Each
* Weepholes are incidental
For additional:
* Concrete, as per Item 405, Structural Concrete Cubic meter
506 Stone Masonry Cubic meter
* Reinforcing bars, ass per Item 404, Reinforcing Steel Kilograms

* No deduction on holes < 1 sq.m


503 Metal frames and grating Set

* Concrete, as per Item 405, Structural Concrete Cubic meter


* Reinforcing bars, ass per Item 404, Reinforcing Steel Kilograms 507 Rubble Concrete Cubic meter

* No deduction on weepholes
504 Cleaning and Reconditioning of Existing Drainage
504 (1) Removing, cleaning, stockpiling salvaged culvert pipe Linear meter
504 (2) Removing, cleaning and relaying salvaged culvert pipe Linear meter 508 Hand-laid Rock Embankment Cubic meter
504 (3) Cleaning culvert pipe in place Linear meter
504 (4) Reconditioning drainage structures Each
* Includes foundation earthworks

* Irrespective of kind or size


* Pipe replacement which cannot be acceptably repaired 509 Sheet Piles Linear meter
shall be replaced without added compensation, including 509 (a) Sheet Piles (Timber)
excavation and backfill
509 (b) Sheet Piles (Steel)
* If no Pay Item, pipe removed will be considered in Item
101, Removal of Structures and Obstructions 509 (c) Sheet Piles (Concrete)

* Paid in full even if not fully driven


505 Riprap and Grouted Riprap Cubic meter
505 (1) Riprap, Class A
510 Concrete Slope Protection
505 (2) Riprap, Class B
510 (1) Bed Course Granular Material Cubic meter in-
505 (3) Riprap, Class C place
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
510 (2) Concrete Cubic meter in- cloths, and other such within or attached to MSE RW)
place 515 (2) Select Granular Fill Cubic meter
515 (3) Structural Backfill Cubic meter

511 Gabions and Mattresses


* Select Granular Backfill / Structural Backfill Cubic meter
511 (1) Gabions Cubic meter * Excavation (Item 103, Structure Excavation) Cubic meter /
511 (2) Mattresses Cubic meter Lump sum
511 (3) Filter Cloth Square meter * Concrete (Item 405, Structural Concrete) Cubic meter
* Gabions (Item 511, Gabions and Mattresses) Cubic meter
* Includes all necessary (excavation, subgrade, etc.)

516 Wet Stone Masonry (Cobblestone) Linear meter


512 Erosion Control Mats, Roving and Cellular Confinement Square meter
System (excluding overlaps) 517 Drain Pipe Linear meter
512 (1) Erosion Control Mat Type ___
512 (1) Roving
520 Hydroseeding Square meter
512 (1) Cellular Confinement System
PART H – MISCELLANEOUS STRUCTURES
* Top soil, Item 608 Cubic meter
* Turf Establishment: 600 Curbs and/or Gutter
600 (1) Concrete Curb (Cast in place) Linear meter
Seeding / mulching Square meter 600 (2) Concrete Gutter (Cast in place) Linear meter
Fertilizer, dry method Tonne 600 (3) Curb and Gutter (Cast in place) Linear meter
600 (4) Concrete Curb (Precast) Piece
600 (5) Concrete Piece (Precast) Piece
513 Permanent Ground Anchor Linear meter 600 (6) Curb and Gutter (Precast) Piece

* Sum of bonded and unbonded length


601 Sidewalk Square meter
* No change will be made due to Contractor’s alternatives

602 Monuments, Markers and Guide Posts


514 Shotcrete (Concrete Spray) Square meter
602 (1) Right-of-Way monuments Each
514 (1) Shotcrete (with reinforcing steel)
602 (2) Maintenance marker posts Each
514 (2) Shotcrete (with reinforcing fibers) 602 (3) Kilometer posts Each
602 (4) Guide posts Each
515.5 Mechanically-Stabilized Earth Retaining Wall

515 (1) Mechanically-Stabilized Earth (MSE) Retaining Wall Square meter 603 Guardrail
(Includes earth walls, backing mats, metal parts, hardware 603 (1) Guardrail (Wire rope or Wire Cable) Linear meter
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
603 (2) Cable Guardrail (Chain Link Fabric) Linear meter 611 (1) Trees (Furnishing and Transplanting)
603 (3a) Metal Guardrail (Metal Beam) Including Post Linear meter 611 (2) Trees (Transplanting)
603 (3b) Metal Beam End Piece Each
603 (4) Guardrail (Timber) Linear meter
612 Reflectorized Thermoplastic Stripping Material (Solid Form) Square meter
604 Fencing 612 (1) Reflectorized Thermoplastic Pavement Markings (White)

604 (1) Fencing (Barbed wire) Linear meter 612 (2) Reflectorized Thermoplastic Pavement Markings (Yellow)
604 (2) Fencing (Chain Link Fence Fabric) Linear meter
604 (3) Fencing (Posts) Each
604 (4) Fencing (Gates) Each 613 Concrete Joint Sealant (Hot-Poured Elastic and Cold- Kilograms
Applied Types)
613 (1) Concrete Joint Sealant (Hot-Poured Elastic Type)
605 Road Signs Each 613 (2) Concrete Joint Sealant (Cold-Applied Type)
605 (1) Warning Signs
605 (2) Regulatory Signs
605 (3) Informatory Signs 614 Waterstop
614-1 Waterstop, ___mm. width Meter
614-2 Waterstop Lump sum
606 Pavement Markings Square meter
606 (1) Pavement markings (Premixed Reflectorized)
618 Reflectorized Thermoplastic Rumble Strips Square meter
606 (2) Pavement markings (Reflectorized Thermoplastic)

620 Chevron Signs Each


607 Reflectorized Pavement Stud Each
607 (1) Reflectorized Pavement Stud (Flush Type)
622 Coconet Bio-Engineering Solutions
607 (2) Reflectorized Pavement Stud (Raised Profile Type)
622 (1) Coco-net Square meter
622 (2) Coco-logs / Fascine Linear meter
608 Topsoil Cubic meter 622 (3) Vegetation Square meter
608 (1) Furnishing and Placing Topsoil
*PART I – MATERIAL DETAILS
608 (2) Placing Topsoil

715 Geotextile
609 Sprigging 100 Square meter 715.8.1 Geotextile from pavement lines Square meter
Separation Geotextile Square meter
610 Sodding Square meter Drainage Geotextile Square meter
Paving Fabric Square meter

611 Tree Planting Each Hydraulic Filter Square meter


VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
Silt Fence Linear meter
715.8.2 Temporary Silt Fence
Remaining Sediment Cubic meter
715.8.3 Removed sediment
(*) 715.8.4 Excavation, backfill, bedding and cover material are
separate pay items

719.4 Epoxy-Resin-Based Bonding System for Concrete


Shall not be measured and paid for separately, but included in Contract price

726 Coal Tar Surface Treatment Square meter

727.5 Epoxy-Resin-Based Bonding System for Concrete


Shall not be measured and paid for separately, but included in Contract price

729.5 Protective Coating for Concrete


Shall not be measured and paid for separately

733.8 Zinc (Hot-Dip Galvanization) Coating for Iron and Steel Products
Shall not be measured and paid for separately
VOLUME II
STANDARD SPECIFICATIONS FOR HIGHWAYS, BRIDGES AND AIRPORTS
734 Stone Mastic Asphalt with Cellulose Fiber Surface Course, Square meter
Hot Laid
* No deduction for weight of bituminous material
* Batchweights not permitted
* Asphalt grade may be changed 1 step w/o change in unit
cost
735 Porous Asphalt Pavement with Polymer Modified Bitumen Square meter
* No compensation when Asphalt Cement is rained and
returned to Contractor

You might also like