This document summarizes the results of a CPT test to determine the vertical load capacity of auger cast piles for a construction project. The CPT was performed to a depth of 4 meters and collected soil resistance data. The LCPC (French Geotechnical Society) method was used to analyze the CPT data and calculate the ultimate tip and frictional capacities of piles at varying depths. The analysis found the piles have sufficient capacity for the intended loads with allowable capacities ranging between 3-529 kN.
This document summarizes the results of a CPT test to determine the vertical load capacity of auger cast piles for a construction project. The CPT was performed to a depth of 4 meters and collected soil resistance data. The LCPC (French Geotechnical Society) method was used to analyze the CPT data and calculate the ultimate tip and frictional capacities of piles at varying depths. The analysis found the piles have sufficient capacity for the intended loads with allowable capacities ranging between 3-529 kN.
This document summarizes the results of a CPT test to determine the vertical load capacity of auger cast piles for a construction project. The CPT was performed to a depth of 4 meters and collected soil resistance data. The LCPC (French Geotechnical Society) method was used to analyze the CPT data and calculate the ultimate tip and frictional capacities of piles at varying depths. The analysis found the piles have sufficient capacity for the intended loads with allowable capacities ranging between 3-529 kN.