Pressure Controls With Narrow Differential: Type Fns & Ans

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PRESSURE CONTROLS WITH NARROW DIFFERENTIAL

Type FNS & ANS

GENERAL DESCRIPTION
• For use with fluorinated refrigerants as well as with air
and water. (Allowable fluid temp.: −20 to 120°C)
• Type FNS with fixed narrow differential
• Type ANS with adjustable narrow differential
• Available drip proof enclosure for marine application or
explosion proof enclosure for special application.
• Mounting bracket is supplied as standard.
• With SPDT contact mechanism.
• IP44 with upper lid (option). ……Type FNS
• Stainless steel models are available upon request.
mark applicable (available upon request) Type FNS

Type ANS

TYPE NUMBER SELECTION (SPECIFICATIONS)


Type FNS–Fixed narrow differential Unit: MPa {kgf/cm2}
Range Differential Factory Setting Max. Working Wt.
Catalog No.
Min. Max. Fixed Off On Pressure (kg)

−0.06 0.1 0.006 approx. (0.019) 0.025 0.3


FNS–C101X
{−50cmHg} {1} {0.06 approx.} {(0.19)} {0.25} {3}

−0.02 0.2 0.008 approx. (0.042) 0.05 0.5


FNS–C102X
{−20cmHg} {2} {0.08 approx.} {(0.42)} {0.5} {5}

−0.06 0.6 0.02 approx. (0.28) 0.3


FNS–C106X 0.32
{−50cmHg} {6} {0.2 approx.} {(2.8)} {3.0} 1.5
0.1 1 0.025 approx. (0.575) 0.6 {15}
FNS–C110X
{1} {10} {0.25 approx.} {(5.75)} {6.0}

0.5 3 0.12 approx. (2.38) 2.5 3.3


FNS–C130X
{5} {30} {1.2 approx.} {(23.8)} {25} {33}

Type ANS–Adjustable narrow differential Unit: MPa {kgf/cm2}


Differential Max.
Range Factory Setting Wt.
Catalog No. Min. Max. Working
(kg)
Min. Max. Bottom Top Bottom Top Off On Pressure

−0.06 0.1 0.007 0.007 0.014 0.015 0.018 0.025 0.3


ANS–C101XB
{−50cmHg} {1} {0.07} {0.07} {0.14} {0.15} {0.18} {0.25} {3}

−0.02 0.3 0.008 0.01 0.018 0.027 0.141 0.15 1


ANS–C103XB
{−20cmHg} {3} {0.08} {0.1} {0.18} {0.27} {1.41} {1.5} {10}

−0.06 0.6 0.015 0.018 0.03 0.045 0.28 0.3


ANS–C106XB
{−50cmHg} {6} {0.15} {0.18} {0.3} {0.45} {2.84} {3.0} 1.5
0.32
0.1 1 0.02 0.03 0.045 0.07 0.575 0.6 {15}
ANS–C110XB
{1} {10} {0.2} {0.3} {0.45} {0.7} {5.75} {6.0}

0.5 3 0.23 0.37 2.32 2.5 3.3


ANS–C130XB
{5} {30} 0.12 0.2 {2.3} {3.7} {23.2} {25} {33}

1 3.5 {1.2} {2.0} 0.24 0.39 2.82 3 3.8


ANS–C135XB
{10} {35} {2.4} {3.9} {28.2} {30} {38}
・Enclosure: IP20
・Drip Proof Models: Available upon request. (Refer to Pages 46, 47.)

15
ELECTRICAL RATINGS CONTACT FUNCTIONS
Rated Voltage (V) Power Factor
125/250V. AC
Rated Amps. (A) (cosφ) 3
Non-Inductive Current 1 1
12 5
Inductive Full Load 0.75
Current Locked Rotor 0.45 72

1 Common Terminal
3 Close on Pressure Increase
5 Close on Pressure Decrease
↑: Operating direction on press. increase at High Press. Side
PRESSURE CONNECTIONS

1/4" Flare
Refer to Pages 43, 44
Standard

DIMENSIONS
Standard Model
Type FNS
4‐M4×0.7 Unit: mm
Thread Mounting Catalog No.
Range Hole for Bracket A B
Adjusting Screw
(50) FNS–C101X 113.3
80 22.4 FNS–C102X 99.7
22.4
FNS–C106X
(17.3) 25±0.5 (20.8)

96.8
FNS–C110X
FNS–C130X 93.5 18.4
63.1
(A)
20.5

φ6(1/4")
Flare Nut (B)

Type ANS
4‐M4×0.7 Unit: mm
Thread Mounting Catalog No.
Hole for Bracket A B
80
(50) ANS–C101XB 113.3
φ21 Range
Adjusting Dial 22.4 ANS–C103XB 99.7
22.4
ANS–C106XB
(17.3) 25±0.5 (20.8) 8

96.8
ANS–C110XB
ANS–C130XB
93.5 18.4
ANS–C135XB
63.1
(A)
20.5

φ6(1/4")
Flare Nut (B) Unit: mm

16

You might also like