Professional Documents
Culture Documents
Mirafi S800: Gai-Lap
Mirafi S800: Gai-Lap
Mirafi S800: Gai-Lap
Mirafi® S800 is a needlepunched nonwoven geotextile composed of polypropylene fibers, which are formed into a
stable network such that the fibers retain their relative position. Mirafi® S800 is inert to biological degradation and
resists naturally encountered chemicals, alkalis, and acids.
TenCate Geosynthetics Americas Laboratories are accredited by Geosynthetic Accreditation Institute – Laboratory
Accreditation Program (GAI-LAP).
MINIMUM AVERAGE
MECHANICAL PROPERTIES TEST METHOD UNIT
ROLL VALUE
MD CD
Grab Tensile Strength ASTM D4632 lbs (N) 230 (1024) 230 (1024)
Grab Tensile Elongation ASTM D4632 % 50 50
Trapezoid Tear Strength ASTM D4533 lbs (N) 95 (423) 95 (423)
CBR Puncture Strength ASTM D6241 lbs (N) 600 (2669)
Weight ASTM D5261 oz/yd2 (g/m2) 8.0 (271)
Thickness ASTM D5199 mils (mm) 90 (2.3)
Disclaimer: TenCate assumes no liability for the accuracy or completeness of this information or for the ultimate use by the purchaser. TenCate disclaims any and all express,
implied, or statutory standards, warranties or guarantees, including without limitation any implied warranty as to merchantability or fitness for a particular purpose or arising from
a course of dealing or usage of trade as to any equipment, materials, or information furnished herewith. This document should not be construed as engineering advice. Mirafi® is a
registered trademark of Nicolon Corporation. Copyright © 2021 Nicolon Corporation. All Rights Reserved
FGS000348
ETQR31