Professional Documents
Culture Documents
No of List Use Construction Tools and Pieces of Equipment
No of List Use Construction Tools and Pieces of Equipment
Construction Tools
Construction tools list for building construction works such as concrete, brick masonry, levelling, woodworks, floor
works, slab works, bricklaying, plastering, etc. is provided.
Every construction tool is necessary to achieve good results in the whole project.
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
3. Block Plane This tool is used in Door and window wood works.
(Wooden)
4. Bolster Bolster is like chisel but it is used to cut bricks. Its cutting
edge is wider than the width of brick. It is useful for
accurate cutting of bricks.
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
5. Boning Rod Boning rods are made of wood and they are T shape.
They are used to level the excavated trench throughout
its length. Minimum three boning rods are used to level
the trench surface.
6. Brick Hammer Brick hammer is used to cut the bricks and also used to
push the bricks if they come out of the course line.
Showing 1 to 9 of 9 entries
PreviousNext
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
21. End Frames Their use is similar to the line and pins. But instead of
pins, L shaped frames are used at the end of thread which
hold the brick work effectively and level the alignment
accurately.
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
25. Framing Square This tool is used in Brickwork, Plastering to check right
angle.
Showing 1 to 10 of 10 entries
PreviousNext
Also, read: What Is DLC (Dry Lean Concrete) | Advantge of DLC (Dry Lean Concrete )
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
31. Hand This vibrator use small area vibrtion like column and beam.
Vibrator
33. Helmet The safety helmet should be necessary in construction works. Any
material or structure may fall from height during construction work. So,
to protect the head from injury or any fatal accident, this safety helmet
should be used.
35. Hoist Hoist use of tie material and other normal woark.
36. Hoist lift Hoist is a device for raising or lowering a load by means of a drum or
wheel lift to which wraps the rope or chain. It can be operated by hand,
is driven electrically or pneumatically, and the chain or wire rope fibers
are used as lifting device.
Showing 1 to 10 of 10 entries
PreviousNext
Also, read: What Is Shear Wall | Classification of Shear Walls |Advantages of Shear Wall | Functions of Shear Wall |
Important Point Shera Wall
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
40. Jack Plane(M.S.) Jack plane is used in the wood work to smoothen the
surface of doors and windows etc.
42. Line and Pins Line and pins consists a thread whose ends are connected
with two solid metal rods with pin points. It is used to level
the alignment of brick course while brick laying.
43. Line Level This tool is used to check horizontal level in brickwork,
plastering , flooring and tile works.
44. Mason’s Square Mason’s square is used to achieve perfect right angle at
the corner of masonry wall. It is “L” shape. First course is
laid properly using Mason’s square then based on the first,
remaining layers of bricks are set out.
47. Measuring Box To measure the exact quantity while mixing the concrete
or mortar.
49. Mixer Machine To mix the material for preparing the concrete.
Showing 1 to 10 of 10 entries
PreviousNext
Also, read: Requirements of Good DPC | Prevention of Dampness: Use of DPC | Methods of Damp proofing
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
50. Needle Vibrator To level and settle the fresh concrete while pouring the
concrete into reinforcement.
51. Pick Axe Pick axe is used to excavate the soil. It is more suitable for
hard soil which is quite difficult to dig with spade or hoe.
53. Plate Vibrator This tool is used to vibrate the concrete in a thin section
like slab while pouring. For workability purpose, we all
add water to concrete. To avoid that we are using
vibrators.
54. Plumb Rule Plumb rule is used to check the vertical line of wall
whether it is perfect vertical or not. It contains a straight
wood board with uniform edges. On its center a groove is
provided in which plumb bob is situated. When the rule is
placed vertically with the wall the plumb bob should be in
the groove line otherwise the wall will not be vertical.
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
57. Putty Knife Putty knife is used level the putty finishing and also used
to reduce the thickness of finish when it is more thick.
Showing 1 to 10 of 10 entries
PreviousNext
Search:
NAME OF MATERIAL
SR.NO. IMAGE USE / APPLICATION
/ PRODUCT
61. Road Header Machine A road header machine called a boom type road header. Road
headers are advanced, self forced and extremely powerful
rock cutting machines are designed to excavate roadways,
tunnels and compartments continuously without using
volatile. Powered electro hydraulically, they produce no
fumes and are used extensively in mineral mining.
68. Skid Steer Loaders A skid loader or skid-steer loader is a small rigid frame,
engine-powered machine with lift arms used to attach a wide
variety of labor-saving tools or attachments.Though
occasionally they are equipped with tracks, skid-steer loaders
are typically four-wheel vehicles with the wheels mechanically
locked in synchronization on each side, and the left-side drive
wheels can be driven independently of the right-side drive
wheels.
Showing 1 to 10 of 10 entries
PreviousNext
Also, read: Estimation for Building Works | Centre Line Method | Long and Short Wall or Out and in to in a method
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
72. Straight Edge Straight edge brushes are used to provide finishing to the
Brushes plastered surface especially at corners and edges of walls.
74. Tower Crane This crane use of material transport one building to another
building in air.
Showing 1 to 6 of 6 entries
PreviousNext
Also, read: Mortar Vs Grout | What Is Motor and Grout | Type of Motor and Grout | Difference Between Mortar and
Grout
Show entries
Search:
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
76. Trowel (Hand) Used in masonry and plastering works to place the
mortar.
NAME OF
SR.NO. MATERIAL / IMAGE USE / APPLICATION
PRODUCT
80. Wedge Wedge is a small hard metal blade which is used to cut
the rock surfaces with the help of sledge hammer.