Professional Documents
Culture Documents
DSAUTAZ0011277
DSAUTAZ0011277
DSAUTAZ0011277
Training Tools
8
Section 9
Training Tools
Design Consultants
Consultants
Design
8
Training Tools
Training Tools
Mark Di Salvo
6308 E. Evans Drive
Scottsdale, AZ 85254
U.S.A.
TEL: 602 922-9630
FAX: 602 609-0166
Email: gxii@primenet.com
Genesis XII Engineering provides PICmicro® microcontroller product development services in the
disciplines of hardware and software. Many years of experience in applications involving embedded 8
controllers for data acquisition, DC/Stepper Motor Control, communications, computer peripherals,
electronic toys and test equipment. Also, experience with sound generation using ADPCM and secure
Training Tools
access using the Microchip Technology KEELOQ® encoder/decoder devices. Our clientele spans both the
consumer and industrial markets. Whatever your application, we will create the winning solution. At
Genesis XII Engineering we treat your product as if it were our own. You success is our reputation.
Consultants
Email: danagp@aol.com
Design
Aircraft Instruments, Automotive Control, Consumer Products, Medical Electronics, PC Peripherals, R/C
Hobby Accessories.
8
Training Tools
Training Tools
Steve Fister
2456 N. Pantano Road
Tucson, AZ 85715
U.S.A.
TEL: 520 733-0909
FAX: 520 733-0901
Email: sfister@ssconsultinginc.com
web: www.ssconsultinginc.com
S+S Consulting is a team of experienced design engineers and professionals that provide working 8
solutions to technical problems. The staff has encountered applications in automotive, consumer and
military electronics requiring the development of various technologies for high performance and low cost.
Training Tools
This engineering and technical expertise can often compliment the capabilities of your own engineering
department.
S+S consulting offers a range of technical services including design and analysis, printed circuit board
layout, prototype fabrication, and lab verification of designs. Our experience includes communication and
control applications making extensive use of the PICmicro® MCU and KEELOQ® architectures. Examples
include products such as keyless entry, appliance controls, industrial safety switches, high efficiency power
supplies, automated test equipment, and remote controls. Please contact us to discuss your specific
application in detail.
Consultants
expertise covers a broad spectrum, ranging across systems engineering, undersea acoustics, optics,
Design
mechanical/packaging, analog and digital electronics, and software. Real-time embedded system design
is a specialty reflected across many projects.
Hardware capabilities include analog and digital electronics design, schematic capture/PCB layout, and
mechanical/packaging design, including rapid product prototyping and short-run manufacturing. Software
capabilities include embedded software for the entire line of Microchip Technology devices with a complete
suite of development tools. Many product designs have been complemented with highly sophisticated PC-
resident Win 3.1/95 compliant custom applications software.
8
Customers range from major aerospace manufacturers to government research labs, to small businesses
with product designs flying in production military aircraft displays, spaceborne instrumentation, underwater
Training Tools
acoustic modem and sonar applications, and in the field with custom battery powered data loggers.
Training Tools
Ron Milner
200 Litton Dr., Suite 215
Grass Valley, CA 95945
U.S.A.
TEL: 530 272-8206
FAX: 530 272-5377
Email: ron@applied-design.com
web: www.applied-design.com
Applied Design Laboratories, Inc. has been designing a wide range of consumer and industrial electronic 8
products since 1984. We have been designing with the Microchip Technology family since 1993 and have
done many designs that are now in Lionel Trains products including their complete command control
Training Tools
system. Microchip Technology processors provide a quick, easy route into medium volume production.
ADL specialties include toys and games, as well as low-cost solutions to customer’s opportunities. In
addition to ADL’s extensive PICmicro® microcontroller experience, their expertise includes analog, digital,
motor and power control, ultrasonic and optics.
ADL can also arrange and coordinate overseas manufacturing for their clients for high-volume products.
Consultants
Reliable and cost effective designs are the goal of Arcox Engineering, and design for production is their
Design
specialty.
8
Training Tools
Training Tools
Cary Norman
786 Lighthouse Avenue
Monterey, CA 93940
U.S.A.
TEL: 831 649-8041
FAX: 831 649-6470
Email: cary@can-tron.com
web: www.can-tron.com
Can-Tron has been in business since 1982, specializing in providing customized control equipment to OEM 8
manufacturers and in developing new products for many manufacturers in the machinery, medical,
automotive and aerospace industries. In 1990, Can-Tron began providing some of our most popular
Training Tools
controllers under its own name to instrumentation end users. All of Can-Tron’s control products are
microprocessor based and use assembly language for maximum performance. Many protective and user-
convenient hardware features are designed in as well. Can-Tron invites you to take a closer look at its
products. Please visit www.can-tron.com for information.
Consultants
FAX: 619 792-9141
Email: rmarsh1995@aol.com
Design
Founded in 1979, CAT provides consulting services in the areas of software programming, electronic
hardware design, specifications, documentation, costing and studies. CAT has a reputation for completing
projects on time with high quality and reliability.
Specializing in microprocessor/microcontroller based products, CAT develops products for small
companies to large international corporations for industrial, consumer and commercial markets.
Developed products include digital voice recorder, aquatic environment controller, computer input devices
(serial, PS/2®, ADB™), home beer maker, sprinkler controllers, cable tester, remote control toys, IR
8
receivers, vehicle network systems, cellular phone, satellite receiver, LCD projectors, LCD projection
panels, laser pointer system, industrial robot, uninterruptable power supplies, LAN industrial data
Training Tools
acquisition system, automatic tic electronic data switch, welding controls, machine controller, insurance
rating system, commodity graphic/data analysis terminal, automotive digital instrument panels, automotive
transmission controller and hand held electronic games.
Training Tools
John T. Zigrang
2462 W. 230th St.
Torrance, CA 90501
U.S.A.
TEL: 310 534-8559
FAX: 310 534-1084
Email: jtz@interworld.net
Even though we are located in Southern California, JTZ works with companies all over the world.
Established in 1985, JTZ Engineering, Inc. is actively involved in consumer and industrial product 8
development specializing in the Security industry, Printer Controllers, Test Environment Support and
Control Subsystems. JTZ has a staff of five engineers and programmers with more than 80 years of
Training Tools
combined experience. We have been working successfully with PICmicro® microcontrollers since 1987.
Recent experience includes:
Access Control Systems for the Safe and Banking industries
RS-232 Communications for data conversion
Battery operated devices for multi-year operation
Fuel control subsystems
Real-Time audio control system
Inspection Equipment controller
Dallas TAG devices for security applications
Microchip Technology’s KEELOQ® secure-data products integration
Our designs are produced at production levels of 3000 a week, to 100 a year. Whatever the size of your
project, JTZ can assist in getting your ideas to market. At JTZ we are able to do full product development
including system design, layout and packaging, with surface mount designs as a specialty. We also provide
services for low volume production and management of contract manufacturing for our designs. JTZ has
also set up in-house manufacturing for clients just starting in electronic products.
Project outlines and/or design requirements can be faxed to (310) 534-1084 for quoting. Or you can start
by contacting Kaye for more information on JTZ or to set up an appointment.
Consultants
Design
8
Training Tools
Training Tools
John Martinelli
753 Vista Palacio
Camarillo, CA 93012
U.S.A.
TEL: 805 388-1199
FAX: 805 384-0176
Email: john.martinelli@gte.net
Member of Microchip Technology Consultant Program since 1992
Mirad Capabilities 8
Mirad is a complete product development center for consumer electronics, computer peripherals, and
industrial applications. The services offered by Mirad include Mechanical Engineering, Packaging,
Training Tools
Electronic and PCB Design, Programmable Logic Design, Microcontroller Firmware and Software, with
emphasis is on low cost, high volume manufacturing.
Mirad Custom designs
Trackballs, Pens, Mice, and Touchpads
Combination Keyboard / Mouse / Joystick devices.
Hand held wireless devices (RF and IR)
Infrared remote controls
Docking stations for hand held data acquisition units.
LCD display interfaces / remote terminals
Industrial Process controllers
Motor Controller Systems
Smart Sensor Modules
Factory Test Equipment
Magnetic Strip Readers
Mirad Pointing Device Products
Mirad sources standard pointing device controllers for ADB™, PS/2®, and Serial Mice. These devices were
formerly sold by Microchip Technology under the part numbers of MTA41110, MTA41120, and MTA41300.
Mirad also supplies custom designs for unique pointing device applications.
About Mirad
Mirad was founded in 1991 by John K. Martinelli and has focused on applications using the Microchip 9
Technology family of processors and memory products. With over 20 years in the industry John has been
involved projects ranging from aircraft engine control systems to single chip solutions. Mirad has customers
that span the globe doing business in Europe as well as the Far East. Call us for a quote on your next
Consultants
product development.
Design
8
Training Tools
Training Tools
Lou Josephs
12034 Alderbrook St.
Moorpark, CA 93021
U.S.A.
TEL: 805 523-9701
FAX: 805 523-9701
Email: lounich@vcnet.com
Precision One is an engineering services and consulting firm specializing in power electronics and analog/
digital circuit design. Several of our designs employ embedded controls to monitor or control critical 8
parameters. We are fluent in the design of power converters, inverts and battery chargers using analog
controls and microcontrollers. The company is situated in Moorpark, CA with several clients in the Southern
Training Tools
California area.
Precision One is a full capability product design house and specialize in turn-key design. We can transform
your engineering design specification into a completely documented production model ready for release to
manufacturing. Our engineers also work on site at your facility to provide electrical and mechanical
consulting services.
We have complete CAD analysis and simulation capability. SPICE is used to simulate circuit designs,
perform Monte Carlo and sensitivity analysis where possible before building the actual hardware. All
mathematical analysis is done using Mathcad to insure a complete and thorough design process.
Consultants
RDL has an experienced software and hardware engineering staff able to assist in your company’s
engineering needs, especially those requiring tight development or short time-to-market schedules.
Design
RDL can play any part, whether we turn-key the entire project or simply handle a minor element or phase,
we can assist you in developing & writing product specification.
RDL can quickly prototype any invention for proof of concept and system integration. We typically remain
involved in product development from the conceptual phase through pilot production.
RDL product development has included systems as complex as a real-time neural network video frame
recognition system and as simple as a direction controller for a toy train. 8
Training Tools
Training Tools
Keith Riordan
20370 Town Center Lane, Ste. 258
Cupertino, CA 95014
U.S.A.
TEL: 408 257-4428
FAX: 408 257-4769
Email: bohlale@earthlink.net
8
Sigma Engineering U.S.A. California
Darius Mostowfi
Training Tools
248 Beverly Drive
San Carlos, CA 94070
U.S.A.
TEL: 650 631-7161
FAX: 650 631-7161
Email: darius@dsp.com
Microcontroller hardware/software development. Product development, DSP and Control System
Applications.
Consultants
Examples of completed designs include: digital filters; temperature and humidity monitoring and control
Design
systems; frequency synthesizers; robotics systems; battery powered systems; user interfaces; RS-232,
RS-485, I2C™, IEEE-488(GPIB), Access Bus, ADB, PC/AT®, and USB communication protocols; LVDT
controllers; servo, DC, and stepper motor control systems. We have experience with every PICmicro®
microcontroller chip on the market. Contact us for a free consultation and references. We stand ready to
meet your design needs.
8
Training Tools
Training Tools
Gary Carroll
6595 Odell Place - Suite B
Boulder, CO 80301
U.S.A.
TEL: 303 581-1041
FAX: 303 581-1061
Email: garycarr@ix.netcom.com
BasIQ Systems, Inc. (pronounced "basic") is an engineering design and development firm located in
Boulder, Colorado. BasIQ specializes in simple, cost-effective Radio Frequency Identification (RFID) 8
applications including Access Control, Animal ID, Personnel tracking and Automobile Anti-theft devices.
Our staff has over fifty years of combined engineering experience and is recognized as leaders and
Training Tools
innovators in the RFID field. We hold numerous patents dealing with both RFID readers and transponders
and have several others pending.
The BasIQ engineers have consulted for a majority of the RFID manufacturers in the industry today. Many
of the RFID products currently in the marketplace started in our engineering lab. A few of our previous
clients are Fortune 100 and some are household names.
We are committed to working with our customers to bring their ideas to fruition. Whether you need initial
proof-of-concept prototypes or production ready designs, BasIQ will make your ideas into products.
Consultants
standing behind every engineering problem with which we are presented, big or small. In addition, should
Design
your company require a short term or long term turn-key world class manufacturer, our facilities are
available to produce and deliver, on time, a quality product, 100% guaranteed. We will meet or exceed your
highest standards of quality.
8
Training Tools
Training Tools
Jerry Farmer
12308 W. Mexico Place
Lakewood, CO 80228
U.S.A.
TEL: 303 980-0788
FAX: 303 727-6377
Email: MyriadDev@home.com
web: www.Myriad.westhost.com
Since 1976, when founder, Jerry Farmer, began consulting on microcontrollers, Myriad has grown to 8
become a highly respected company with an average of 15 years consulting experience on hardware,
software and system designs. Myriad designs, develops and produces products ranging from real-time
Training Tools
embedded control to data acquisition, communication systems, video/audio, compilers and real-time
operating system design. Myriad has experience in VHDL applied to FPGA design which can be connected
to Microchip Technology’s products.
Some of Myriad's major PICmicro® microcontroller achievements include: Tiny Real-time MultiTasking
Operating System Kernal; C Compiler & Assembler for the PICmicro MCU family; Forth interpreter on a
PIC16C57; 10+ independent timers & tasks; tied networks of PICmicro microcontrollers together through a
RS-485 twisted pair; FULL use of paging of code memory on PIC16C5X; emulation of many different micros
on PICmicro microcontroller; PICmicro MCU to IBM® Parallel Port (RS-232, RS-485, I2C™, XMODEM);
software simulators of PICmicro microcontrollers; Pulse Width Modulation/Frequency Generation - from
less than 1us to days. Other interesting projects using PICmicro microcontrollers include: master car alarm;
detection of cars in "blind spot" of a moving vehicle; and ultrasound mapping of distances of objects for the
blind.
Consultants
Design
8
Training Tools
Training Tools
Tim Lewis
240 Oral School Road
Mystic, CT 06355
U.S.A.
TEL: 860 572-9600
FAX: 860 572-7328
Email: tlewis@etc.atinc.com
web: www.etc.aati.com/
ETC is experienced with Microchip Technology’s PIC12CXXX, PIC16C5X, PIC16C6X, and PIC17C4X 8
devices and is currently developing applications with the high performance PIC17C75X microcontrollers.
ETC has utilized PICmicro® microcontrollers in a number of embedded solutions using a full range of their
Training Tools
on-chip peripherals. ETC uses PICMASTER® ICE tools to support faster development and integration
cycles.
ETC provides design consulting and turn-key solutions for: Analog and Digital Data Acquisition, Analog and
Digital Signal Processing, Automated Test, Discrete and Continuous Dynamic Control, Timing and
Waveform Generation.
Consultants
Design
8
Training Tools
Training Tools
Howard Wright
71 Utopia Road
Manchester, CT 06040-2281
U.S.A.
TEL: 860 647-8738
FAX: 860 649-7735
Email: sales@tekind.com
web: www.tekind.com
TEK Industries, Inc., founded in 1984, offers a full range of expertise and services dedicated to the 8
conception, design, manufacture and provision of high quality electronic products, on-time, and at
competitive prices. Our capabilities include circuit board layout, prototyping, software and firmware
Training Tools
development customized to meet your needs.
TEK Industries has broad experience utilizing PICmicro® microcontrollers in the design of its own and
customers’ products. We have extensive experience with Dallas Semiconductor’s Automatic Identification
products and offer a full range of readers including Intrinsically Safe Rated readers.
In addition to providing products to the payphone industry, TEK also specializes in circuit board, cable
harness, wave soldering and electromechanical assembly.
9
A.I.P. Systems Inc. U.S.A. Florida
Phillip Vallejo
Consultants
4440 SW 5th St.
Design
Miami, FL 33134
U.S.A.
TEL: 305 442-8732
FAX: 305 444-7548
Email: aipsys@bellsouth.net
Machine controls, PC based ATE, Manufacturing.
8
Training Tools
Training Tools
Percy Shadwell Jr.
3308 Queen Palm Dr.
Jacksonville, FL 32250-2328
U.S.A.
TEL: 904 223-4465
FAX: 904 223-4510
Email: b.shadwell@ieee.org
web: www.ccse.net/~butchs/
Shadwell Technical Services is dedicated to delivering the best technical consulting value. We specialize 8
in applying the latest and broadest technical knowledge in the most pragmatic fashion.
Areas of experience include: Industrial control, robotics, embedded microprocessors, sensors, opto-
Training Tools
electronics, applied physics, electronic circuit design, thermal physics, nuclear physics, physical chemistry,
research and development, electronic system design, computers, embedded micro controllers, fuzzy logic,
artificial intelligence, machine vision, industrial automation, gamma imaging, medical electronics,
prototyping, micro-power, motion control, rf, television, fiber optic, communications, WAN, project
management, software, and assembler programming.
Developing new products and solving difficult technical problems are our principal areas of activity.
Consultants
Most of our design skills revolve around SMT manufacturing guidelines. We welcome all opportunities of
Design
any size or complexity.
8
Training Tools
Training Tools
Wayne Ashe
1479 Parker Rd., Ste. 700
Conyers, GA 30094
U.S.A.
TEL: 770 760 1554
FAX: 770 760 1341
Email: washe@matrixlabs.com
Matrix Labs, Inc. is an application engineering and consulting firm that specializes in niche market product
and partner development. They evaluate opportunities as they relate to their ability to satisfy a part of the 8
equation necessary to bring a product to commercial fruition. In some instances, they innovate or present
completely new technology and in other cases they simply improve existing products through cost efficient
Training Tools
design. Matrix will be happy to bid on virtually any fee-based contract engineering project that includes
Microchip Technology products.
Matrix employs a well rounded team of professionals to evaluate the full scope of a potential product. All
issues are examined carefully. They solicit the advice of top intellectual property experts and research the
economic and marketing indicators as well. Their scope and purpose is to remain a small engineering firm
that participates in the commercialization of products that they develop or co-develop. Matrix has high level
experience with cellular, GPS, DSP and Security applications. They have also had occasion to participate
in the placement of private funds for special development projects.
9
Ballard Instruments U.S.A. Hawaii
Leslie Reading
Consultants
74-5588 Pawai Place - Bldg. J
Design
Kailua-Kona, HI 96740
U.S.A.
TEL: 808 326-5485
FAX: 808 329-0843
Email: ballard0@gte.net
Radio Frequency components, telemetry RFDF.
8
Training Tools
Training Tools
John Dickey, P.E.
1910 Arnold Ave
Rockford, IL 61108
U.S.A.
TEL: 815 394-2766
FAX: 815 229-8640
Email: 74640.1732@compuserve.com
John A. Dickey is a graduate of The Ohio State University with more than 17 years of circuit design
experience in the areas of analog, digital, microprocessor, and embedded firmware. Dickey is a registered 8
electrical engineering consultant in the state of Florida. In addition, he holds four U.S. patents.
Dickey has been designing embedded control applications for power controls, consumer appliances and
Training Tools
numerous other areas for many years. Dickey utilizes a wide variety of single chip microcontrollers and
microprocessors, of which tens of thousands of production units have been fielded. Dickey’s strongest
capabilities are in the lowest unit cost design for high volume consumer products, severe environmental
applications, and Electro-mechanical and Electro-physical interfaces and controls.
Consultants
Some specific projects were: multiple timer using the PIC16C57, logarithmic amplifier signal analysis and
Design
output control using the PIC16C72, telephone access device using the PIC16C54, computer controlled
production test fixture for battery charger circuit board tests, multiple-station nurse call audio-visual paging
system, controls for a label printing and packaging machine, distributed time and attendance data collection
systems with software for magnetic stripe, bar codes and RS-485 communications, analog/digital
temperature/environment controls for ovens, PLC system for multiple-station drilling machine, computer
controlled antenna winding machine, electrical panels for control of fountains. We have considerable
experience in machine control systems using PLCs and have associates who specialize in mechanical 8
design and construction of machinery.
Training Tools
Training Tools
Larry D. O’Cull
4628 Northwestern Dr., Suite B
Zionsville, IN 46077
U.S.A.
TEL: 317 471-1577
FAX: 317 471-1580
Email: locull@prllc.com
web: www.prllc.com
Progressive Resources specializes in commercial, industrial and consumer product development. 8
Our areas of expertise include: Embedded system design, real-time software development, closed-loop
control systems, PC applications, industrial control and monitoring systems, automated test systems,
Training Tools
medical instrumentation, data acquisition and analysis, and ASIC design.
Our design services include: Electronic design, schematic capture, PCB layout, software development,
packaging, documentation, prototyping, concept and design evaluation, cost reduction, short-run
production, and manufacturing source assistance.
Consultants
TEL: 800 307-8508
Design
FAX:
Email: custeng@aol.com
web: www.bcity.com/customeng
Custom Engineering, Inc. provides a wide variety of embedded microcontroller solutions to our clients. We
specialize in Industrial Controls needing immunity to ESD, EFT, RFI & EMI. However, we have extensive
experience in Low Power, Low RF emissions, and High Reliability Applications.
8
Training Tools
Training Tools
David Blanding
3116 Merriam Lane
Kansas City, KS 66106
U.S.A.
TEL: 913 362-9422
FAX: 913 362-9477
Email: davidb@appliedmicro.com
web: www:appliedmicro.com
Applied Micro Technology, an Electronics Development and Manufacturing Company in business since 8
1973, provides their customers with a variety of custom microcomputer designs and medium scale
production. They have been using PICmicro® microcontrollers for more than 13 years, and currently have
Training Tools
8 products in production using PICmicro based microcontrollers.
Major technologies have included controllers for diesel powered electric generators, large industrial air
compressor systems for the industrial and medical markets, 480 volt, 3 phase motor controllers, variable
electrical power duty cycle controllers, electronic compasses for pivot irrigation control, monitors and
controllers for very large dairy product storage facilities, laboratory water purification systems, and central
controlling and monitoring systems for commercial batting cage complexes.
Applied Micro Technology’s customers are drawn from the Telecommunication, Medical Electronics,
Agribusiness, Entertainment and Industrial Marketplaces. Their design capabilities utilize state-of-the-art
digital technologies which allows them to achieve miniaturization and reliability, providing cost effective
solutions to applications from a wide variety of customers.
Consultants
Design
8
Training Tools
Training Tools
Daniel C. Walker
50 Olde Forge Road
Hanover, MA 02339-2438
U.S.A.
TEL: 781 792-0012
FAX: 781 792-0093
Email: dcw@aeeng.com
AE Engineering provides a comprehensive electronic product development with a focus on design for
manufacturing. We provide complete consulting services from single board prototype to complete systems. 8
AE Engineering has a solid reputation for providing diversified product development services for many
industries. A major factor of the company’s success is the ability to address not only electrical engineering
Training Tools
designs, but also engineering products with cost and manufacturing in mind.
Our expertise has addressed tough engineering solutions for Military, Industrial, Consumer, and Retail
markets. Some of the services we can provide are; Product Feasibility Studies, Product Specification
Development, Embedded System Firmware Development, Application Software Development, Analog,
Digital, and/or Micro-Processor/Controller Designs, PCB Layout, PCB Fabrication/Assembly, Product
Prototyping, Product Manufacturing, Production Support Equipment/Testers, Comprehensive
Documentation, Manufacturing Support, Field Support, Evaluation/Testing Services and Training.
Some of the products developed; Air Cargo Shift Sensor, Refrigerant Level Sensor (Space Station
Freedom), Army Intrusion Alarm System, Portable Antisubmarine Sonar System, Centrifuge Rotor
Detection System, Overhead Light Controller, VAR Compensating Controller, Fault Circuit Indicators, Web
Break Sensor, Acoustically Operated "hands free" Lavatory Faucet, Occupant Sensing System, Ultrasonic
Headrest Adjusting System, (U.L. recognized) Audible Siren, Vent Hood Status Annunciator, and a Part
Counting/Weighing Scale I/O Controller.
Consultants
web: www.BayTechEngineering.com
Design
BayTech was founded in 1996 to provide complete design solutions in applications that utilize:
- Microcontrollers
- Programmable Logic: PLD’s and FPGA’s
- Digital Hardware
- Microcontroller Firmware and Software
BayTech has significant experience in all aspects of the electronics design cycle including product
specification and planning, materials procurement, resource management, schematics capture, PC board 8
layout, prototyping, Alpha and Beta testing, Design-For-Manufacturing, and utilization of electronics
suppliers, distributors, and representatives.
Training Tools
BayTech’s design experience includes application of microcontrollers in the areas of industrial controls and
instrumentation, communications, commercial instruments, and consumer products.
Code for processor platforms can be developed in Assembly Language or C, and implemented in
conjunction with Visual Basic® or Visual C++®.
Training Tools
John F. Zettler
118 Great Road
Stow, MA 01775
U.S.A.
TEL: 978 897-2323
FAX: 978 897-2155
Email: jfz@ma.ultranet.com
web: www.teconex.com
The Teconex Group brings to clients a unique blend of technical competence, project management, and 8
problem solving skills that result in innovative approaches to new product and system design, and timely
and cost effective solutions to problems that often arise in existing products or processes.
Training Tools
Unlike others offering seemingly similar services, the Teconex Group assigns a Senior Engineer with
project management experience to help define project needs, to assist in the planning, and to monitor
project status. All are sensitive to proper user interface design. Senior Teconex personnel typically have
about twenty years experience in their chosen fields; analog and digital hardware, servo design/integration,
special machines and mechanisms, and medical and scientific instrumentation. Tenconex softer engineers
apply assembly, Pascal, and C languages as well as the newer C++®, Object oriented programming, and
Windows® techniques to projects.
Consultants
Raytheon are among the companies that have collaborated with True North in the design of products
Design
utilizing Microchip Technology PICmicro® microcontrollers. We look forward to talking to you about any
aspect of your product creation, improvement or redesign. Please visit our Web site for more information.
8
Training Tools
Training Tools
James Mosenfelder
1644 South 16th Street
Escanaba, MI 49829
U.S.A.
TEL: 800 891-2563
FAX: 906 786-2563
Email: solution@up.bresnan.net
Responsive Technical Solutions, Inc., (RTS), has been designing and programming microcontroller based
products since 1984 and PICmicro® MCU based products since 1991. Our priority is to design products to 8
be profitable while meeting the functional and technical requirements. RTS actively seeks opportunities to
implement PICmicro MCU based designs because these processors offer so much function in proportion
Training Tools
to their cost. We have ported products from 68HC05, 68HC11, 87C51, and 80C196 controllers to Microchip
Technology based designs reducing both parts and labor costs for our customers.
RTS emphasizes the importance of having a clear definition of your project requirements, including the
business as well as technical considerations and will assist our customers in documenting requirements as
needed. RTS services include electrical design, printed circuit board design, software development
services, development of test procedure and/or fixtures, thorough documentation including drawings and
source code in hardcopy and electronic formats.
Contract manufacturing services, from electronic and mechanical assembly through packaging and
complete turn-key services are also available. RTS has developed successful relationship with Current
Works, Inc. of Wauconda, Illinois. Primary attention is given to design for predictable quality processes and
efficient manufacturing. The joint design efforts of the two companies yield significant quality improvements
and simultaneous cost savings for the customer. Current Work, Inc. is especially effective with products in
the low to medium volume production levels, (i.e., 200 to 5000 units per year).
Consultants
Embedded controllers and data collection.
Design
Embedded Logic U.S.A. Minnesota
Brian P. Schmalz
411 Washington Ave. N. Suite 101
Minneapolis, MN 55401
U.S.A. 8
TEL: 612 672-0726 x234
FAX: 612 672-0443
Training Tools
Email: brian.s@logicpd.com
web: www.logicpd.com
Our areas of expertise are medical, industrial and consumer electronics.
Training Tools
Robert Cobb
5988 Mid Rivers Mall Drive
St. Charles, MO 63304
U.S.A.
TEL: 314 926-2204
FAX: 314 447-8542
Email: bcobb@ezl.com
Grid MicroSystems provides custom electronic design, software engineering, and manufacturing services
to companies in the consumer and light industrial markets. Products include machine control, intelligent 8
battery chargers, data acquisition, and network/data communication.
Bob Cobb, President of Grid MicroSystems, has more than fifteen years of software and electronic
Training Tools
engineering experience.
Grid MicroSystems’ clients include cellular telephone companies, mag-card reader companies, casino
gaming companies, and fitness/health machine manufacturers. Grid MicroSystems provides custom
electronic design, software engineering, and manufacturing services to companies in the consumer and
light industrial markets.
Consultants
U.S.A.
Design
TEL: 314 997-4466
FAX: 314 997-0802
Email: chetj@systemintegrators.com
Embedded controllers, analog & digital design, firmware developed surface mount manufacturing.
U.S.A.
TEL: 702 456-1366
FAX: 702 456-1390
Email: kcurtis6@ix.netcom.com
Embedded control systems.
Training Tools
David A. Saar
37 Todd Ridge Road
Titusville, NJ 08560
U.S.A.
TEL: 609 818-0860
FAX: 609 818-0861
Email: dsaar@compuserve.com
Saar Associates, Inc. develops electronic products for clients in a wide range of industries. We also provide
consulting services for evaluation of technologies and product opportunities. SAI brings broad experience 8
in applying many different leading edge and established technologies. We have an extraordinarily well
equipped electronics laboratory facility to support product development and technology evaluation projects.
Training Tools
SAI specializes in RF technology including telemetry, control, and data applications. Radio projects often
start with an assessment of the applicable FCC (or other regulatory agency) rules. SAI can provide
guidance regarding the options for regulatory compliance and the most appropriate radio architecture.
Projects can then be carried through to working prototypes and into production.
Other areas of technical experience and expertise include: Embedded Microcomputer Applications-
Application of microcomputers to nontraditional environments; Sensors and their Applications- Industrial,
process, and commercial applications; Electro-mechanical Systems- Motors, actuators, and controls, and
process controls; Batteries and Portable Power Systems- Battery selection and charging.
SAI can provide complete product development services including industrial design and human factors, and
mechanical and mechanisms design and tooling. SAI also provides support for the transition of products
developed into production
Facilities include a spacious lab and office with: Radio Frequency equipment to 4 GHz including VNA,
Signal Generators, MDA and calibrated test antennas; Microcomputer development systems including 4
Microchip Technology emulators; Environmental test chamber and EMI/ EMC test capabilities; High
Performance analog and digital test equipment from leading vendors.
David A. Saar, President, has a BSEE degree from the Massachusetts Institute of Technology, a JD degree
from the University of Maryland School of Law, and is a registered Patent Attorney. Mr. Saar has over 25
years of experience developing sophisticated electronic and electro-mechanical products.
Consultants
Design
8
Training Tools
Training Tools
John Orren Battle
874 Ladron Avenue, S.
Los Lunas, NM 87031
U.S.A.
TEL: 505 565-1609
FAX: 505 565-1660
Email: john@e6b.com
web: www.e6b.com
Founded in 1991, John O. Battle & Associates is a full service consulting company specializing in electronic 8
circuit design and development with a particular emphasis on applications of Microchip Technology
products. We will provide complete development services for your application from conceptual design to
Training Tools
PC board layout and documentation. Our preferences are as follows:
Microprocessor Programming Language: Assembler and MPLAB® C
Schematic Capture: Orcad SDT
PC Board Layout: PADS
Analog Simulation: SpiceAge
Digital Development: Scenario ABEL & VHDL
We have over 30 years of experience in all areas of electronics including:
Microwave/RF/Analog/Video Circuit/System Design
Radar and Communication Systems
Antennas and Radio Wave Propagation
Navigation Systems and Avionics (incl. GPS)
Synthesizers, Receivers and Transmitters
Electronic Music and MIDI
Video processing and On Screen Displays
Power Line Carrier Communications
Filters, amplifiers, oscillators, mixers etc.
Programming in C and assembler (8086, Z80, 8051 and PICmicro® microcontroller)
ASIC and PLD design (Lattice and Altera)
Cable Television Converter Design
Data and/or Signal Encryption/Decryption.
9
Consultants
John Malvaso
Design
833 Phillips Road
Victor, NY 14564
U.S.A.
TEL: 716 924-7510
FAX: 716 924-0275
Email: jmalvaso@fsisys.com
web: www.fsisys.com
8
Embedded control design for Customer & Automotive.
Training Tools
Training Tools
Ron Cranford
6505 Pharr Mill Road
Harrisburg, NC 28075
U.S.A.
TEL: 704 455-5505 x611
FAX: 704 455-5506
Email: roncran@carcurtech.com
Subassemblies, machine and product controllers, communications equipment & devices, vending control.
8
Training Tools
Randall Mason
2581 US Highway 70 W
Goldsboro, NC 27530-9553
U.S.A.
TEL: 919 736-4500
FAX: 919 580-0511
Email: president@masonelectronics.com
web: www.martincomp.com
Mason Electronics has developed numerous commercial and consumer applications with PICmicro®
microcontrollers. Specifically automotive alarm systems, display driver for LED signs, consumer games,
low-cost consumer product commercial communications and industrial machine controllers. Their main
design experience has been with the PIC16C5X and PIC16C6X families of microcontrollers.
Mason Electronics specializes in automotive applications and low-cost consumer products. Their clients
range from Fortune 100 companies to mid-size (25 employees or less) companies.
Mason Electronics specializes in automotive application design such as car alarms, ignition controllers and
a full range of automotive sensors. They can take your product from conception to prototype, including PCB
design, fabrication, plastic molding for prototypes, and full range of packaging. They have developed
numerous low-cost consumer products such as games, toys and RF communications devices, and offer
their services on hourly or contractual basis. Mason Electronics offers a full complement of services from
market research to cost analysis. All work is performed on a strict non-disclosure confidentially agreement 9
basis.
Consultants
Design
8
Training Tools
Training Tools
Ron Andoe
12626 E. 60th St., Suite 101
Tulsa, OK 74146
U.S.A.
TEL: 918 252-9062
FAX: 918 252-9204
Email: randoe@earthlink.net
web: www.datran.com
8
Training Tools
Adam Reed
390 Taylor Street
Ashland, Oregon 97520
U.S.A.
TEL: 541 482-8933
FAX: 541 482-0929
Email: ajreed@jeffnet.org
AR Engineering has been providing embedded design expertise since 1980. Our design capabilities cover
both analog and digital design. Recent projects using Microchip Technology products include
environmental data acquisition systems, temperature controllers, RF and infrared short links, ultrasonic
distance measurement, stepper motor systems, fast charge battery controllers, and laser systems. We
have designed navigational aids for wheelchair-confined blind persons, ski boot heater systems, laser
perimeter alarms for the RV market, and many other products.
We can provide design expertise in all aspects of the design process, from a quick feasibility prototype to
full production. Our in-house PCB design and prototyping department can generate quick-turn printed
circuit prototypes at surprisingly low cost. We are fully conversant with the latest surface mount
technologies and can make your design both small and cost effective. Our industrial design capability can
give your product the professional appearance needed to make a splash in today’s competitive market.
AR Engineering provides an integrated, team-oriented approach to problem solving. We pride ourselves on
building a partnership with our clients and making communication a cornerstone of our business 9
relationship.
Consultants
Design
8
Training Tools
Training Tools
Ernesto Barrantes
6305 Ruggles Ave., South
Salem, OR 97306
U.S.A.
TEL: 503 362-9681
Email: ebl@open.org
Emulators, digital and analog design.
8
Seitz and Associates, Inc. U.S.A. Oregon
Forrest Seitz
Training Tools
1905 NW 169th Place suite 120
Beaverton, OR 97006
U.S.A.
TEL: 503 617-0808
FAX: 503 617-0809
Email: forrests@seitzassoc.com
Seitz and Associates’ design experience includes a digital cellular phone, several 900 MHz transceivers,
an ultrasonic medical device and oscilloscopes. They have developed products for custom applications as
well as others, which are distributed worldwide. Their clients include Kenwood, Tektronix, Maxtek,
Motorola® and others.
Since 1986, Seitz and Associates has been providing engineering and design development services,
specializing in electronic hardware and software design. They have extensive hardware expertise
combining skills in RF, digital and analog design. Additionally, they have significant capabilities in software
development in support of their hardware designs. Seitz and Associates works with clients from
conceptualization through specification, design, prototype assembly, certification and production. They
employ a large array of test equipment and CAD hardware and software to complete designs in a timely
manner.
Consultants
Bethlehem, PA 18018
U.S.A.
Design
TEL: 610 868-9211
FAX: 610 868-2335
Email: waw@well.com
Cable TV, RF Lan, Hardware & software.
8
Training Tools
Training Tools
Paul Adams
7419 Gracefield Lane
Dallas, TX 75248
U.S.A.
TEL: 972 248-2931
FAX: 972 931-4004
Email: microchip@electrowave.com
Specializing in the design and implementation of low cost embedded microcontoller solutions, Electrowave
offers complete design resources from implementing initial concept, to providing production prototypes. 8
Volume production can be provided if desired. Electrowave’s founder has over ten years expertise, and a
proven track record in the implementation and design of RF data links, IR data links, modems, industrial
Training Tools
control, data acquisition, low power circuits and cost optimized solutions.
Consultants
They specialize in providing embedded microcontroller solutions for clients in the industrial control,
Design
vending, computing, point-of-purchase advertising and access control industries, using the PICmicro®
microcontroller line. More than 20 designs are in current production with their clients. These products
include intelligent industrial battery chargers, magnetic card readers, computer printer interface/controllers,
proximity sensing talking advertisers and CNC machine tool controls. Many of these incorporate A-D,
EEPROM, RS-232/ 485, RTOS, LED/LCD displays, voice, computer interface, resident diagnostic and
production test modules. A large library of components and software modules to draw upon means full-
featured products at a competitive rate.
8
Services include consultation, hardware and software design, schematic capture, printed circuit board
layout, mechanical design and assembly/test according to client needs. Far West Designs can also provide
Training Tools
Training Tools
Donald Klusmann
1726 Trowbridge
Garland, TX 75044-7636
U.S.A.
TEL: 972 495-6458
FAX: 972 530-7478
Email: dklusmann@aol.com
web: www.members.aol.com/dklusmann
Klusmann Associates, Inc. has been involved in research, design, and development of microprocessor 8
systems for our clients since 1982. Our expertise in both hardware and software allows us to design a
product that takes full advantage of the latest in microprocessor technology. We specialize in small systems
Training Tools
that use microprocessors to make products small, inexpensive, reliable and user-friendly to the customer.
With anywhere from 5 to 10 new designs each year, our knowledge of the available technology is not only
current, but is expanding all the time.
We have been involved in designs that include: Audio Consoles, POS Terminals, Gas Pump Consoles, Gas
Flow Measuring and Odorizing Equipment, Timer/Clocks, Process Control Systems, Automated Sewing
Equipment, Material Sensing, Cable TV Control Equipment, Speech Products, Lighting Controls, Electronic
Locks, Medical Monitoring Equipment, and Baseball Pitch Monitors.
We have designed products using the full line of Microchip Technology microprocessors including the
PIC16C5X, PIC16C6X, PIC16C7X, PIC17C4X, and PIC17C7X processors as well as Microchip
Technology Serial EEPROMS.
Consultants
Design
Martin Company U.S.A. Texas
John Martin
1117 Lawrence Street
Rosenberg, TX 77471
U.S.A.
TEL: 281 342-7431
FAX: 281 342-5925 8
Email: email@martincomp.com
Maximum Performance Systems.
Training Tools
Training Tools
Robert A. Sherwood
1155 Larry Mahan Dr., Ste. C
El Paso, TX 79925
U.S.A.
TEL: 915 592-8403
FAX: 915 594-1852
Email: jp@seds.com
web: www.seds.com
Sherwood Engineering specializes in custom design of consumer electronic products using 8
microcontrollers and RF circuitry. Some of the products SEDS has developed using PICmicro®
microcontrollers include: Hair curling iron controller. Heating pad controller. Handheld IR/RF learning
Training Tools
remote control. Wireless bar code scanner control system. Auto security alarm system. PICmicro
microcontrollers for use in a remote billboard control application. Manufacturing support equipment.
SEDS was founded in 1987 with engineers adept at designing RF, video, digital, and cable TV settop
products. SEDS has subsequently developed a wide range of products: from high volume personal
appliance controllers to satellite data receivers. Sherwood Engineering can provide complete turnkey
product development, from initial concept through product delivery. Their staff includes systems designers,
digital and RF hardware engineers, ASIC developers, and firmware and software engineers. PCB layout
designers and technicians form the technical support staff, enabling SEDS to produce quick-turn prototypes
and high quality manufacturing-ready SMT and multi-layer PCB designs.
Consultants
Design
8
Training Tools
Training Tools
Kent Mabey
1355 West 8040 South
West Jordan, UT 84088-8320
U.S.A.
TEL: 801 566-6906
FAX: 801 566-6924
Email: kent@kwm.com
web: kwm.com
KWM Electronics, established in 1972, offers engineering, consulting, and manufacturing services to clients 8
in the United States and internationally. KWM started consulting to Microchip Technology in 1982 and
began designing with the EPROM-based PIC16CXXX family before it went into production in 1987. They
Training Tools
continue to design cost effective solutions with PICmicro® microcontrollers.
KWM has experience designing and manufacturing medical, industrial and lighting controls, and consumer
products. They have been involved in such diverse projects as medical stimulators and sensor
conditioners, automated warehousing systems, kitchen appliance control electronics, keyboard encoders,
and communication controllers. KWM’s strength lies in cost effective design of embedded processor
controlled devices and information gathering and processing equipment. Their broad experience enables
them to select a microcontroller with the best price/performance for a given application.
KWM does full turn-key work from initial design to finished product or any phases of the engineering and
manufacturing process required to meet customers’ needs. They offer automated surface mount and
through-hole manufacturing.
Consultants
PICmicro® microcontrollers including a commercial bathroom scale, brushless DC motor controller,
Design
intelligent automobile seat, personal electromyograph monitor, radio frequency based data acquisition of
acceleration and others.
Projects are developed utilizing a top-down design approach with supporting high level and low level
documentation in addition to frequent design reviews. Deliverables typically include prototypes, firmware/
software, documentation, production test station and a small build-to-print run. In-house engineering
capabilities include PC software/ hardware development, CAD design, PCB layout, quick-turn PCB
prototyping and SMT prototyping tools. The staff has expertise in medical electronics, biofeedback devices, 8
digital signal processing and communication systems.
Clients include automobile component manufacturers, medical equipment companies, industrial design
Training Tools
Training Tools
Michael J. Andrews
17409 - 57th Avenue West
Lynnwood, WA 98037
U.S.A.
TEL: 425 742-4674
FAX: 425 745-9279
Email: aaeinc@aae-inc.com
web: www.aae-inc.com
Andrews & Associates Engineering, Inc. is a full-service engineering consulting firm. We specialize in 8
instrumentation hardware and software design and development, converting your needs into quality
products you can depend on. We work on projects that range from minor design changes or analyses, to
Training Tools
complete turn-key new product developments. All designs are highly reliable, testable, maintainable, and
clearly documented.
Consultants
INFINETIX has established itself as a one stop engineering solution for new designs and redesign of
Design
existing products. Specializing in PICmicro® microcontrollers to streamline existing products or provide new
cost effective solutions to the electronic industry keeps the engineering group at INFINETIX busy servicing
major electronic manufacturers throughout the NORTHWEST.
By including mechanical engineering expertise, INFINETIX is positioned well to handle new product ideas
including enclosures, control panels, electronics/printed circuit boards and all documentation necessary for
volume production.
Recent experience includes complete development of products designed for the medical industry both 8
patient monitoring and medical lab equipment along with entries in the utility industry for unattended
transmission of electrical/gas meter data. Battery charging systems, water/air purification, test stands and
Training Tools
Training Tools
Rick A. Pecore
2135 W. Nordale Drive
Appleton, WI 54914
U.S.A.
TEL: 920 733-7381
FAX: 920 733-7382
Email: sales@teamsmt.com
web: www.teamsmt.com/
Lakeshore Electronic Design, LLC is a full service firm specializing in the design of 8-bit microprocessor 8
based electronic controls. Through an underlying design philosophy of simplicity and attention to detail, we
can help you meet your goals of quality, price and performance.
Training Tools
Some of the services we offer include:
* product specification
* component selection and sourcing
* hardware design
* software design
* schematic generation
* PCB layout
* prototypes
* worst case analysis
* failure modes and effects analysis (FMEA) * testing
* regulatory compliance
Along with new designs, Lakeshore Electronic Design can assist in the areas of:
* reverse engineering
* software revisions, conversions, and corrections * cost reductions
* manufacturing improvements
* troubleshooting 9
Customers retain full design ownership and all work includes complete documentation. In addition,
Lakeshore Electronic Design can optimize for your manufacturing department’s equipment and processes,
Consultants
thus helping keep production costs down and product quality up. If you are in need of a manufacturer,
Lakeshore Electronic Design has several partners who can assist you.
Design
Whether you have a one-off design or a volume of 100,000 annually, consider Lakeshore Electronic Design,
LLC for your next project.
8
Training Tools
Training Tools
Theresa J. Schousek
351 Reed Street
Somerset, WI 54025
U.S.A.
TEL: 715 247-3585
FAX: 715 247-3586
Email: tschous@pressenter.com
CONCEPT to PRODUCTION in EIGHT WEEKS?!?!
Vital Innovations, Inc. (VI) specializes in time critical, design-to-cost microprocessor-based electronics. VI 8
met one customer’s eight week challenge on a critical trade show delivery date, while concurrently trimming
the final unit price to 73% of the customer’s target.
Training Tools
At what cost? VI offers fair, fixed hourly rates for around-the-clock service by utilizing an on-call Engineering
Resource Pool. Complete system services include mechanical case design, PCB layout, microprocessor
H/W and S/W, prototyping, and in-house low volume production. For specialized applications, VI’s
Resource Pool includes personnel with automotive and military experience. However, VI’s primary client
base is focused in consumer and industrial hand-held electronics.
Consultants
language. Recent PICmicro MCU projects include motor controls, monitoring and instrumentation systems,
low power and portable designs for consumer and industrial markets. Other engineering services include
Design
printed circuit board layout, packaging converting existing designs to surface mount, re-design for cost
reduction, and prototyping.
Our design engineers work closely with our manufacturing engineers, ensuring your product not only works,
but can also be manufactured in the most cost effective and reliable manner. We can manufacture your
surface mount or through-hole product in small, medium or high volumes.
8
Training Tools
Training Tools
Alexandre Zatsepin
51-53 John St.
Oakleigh, Victoria 3166
Australia
TEL: 613 9563 3096
FAX: 613 9563 3017
Email: alex@flcmicro.com
web: www.flcmicro.com
FLC MICRODESIGN Pty. Ltd., an Electronics Development and Manufacturing Company in business since 8
1993, specializes in industrial and consumer electronic hardware and software development from initial
concept through production. We can improve your time-to-market and allow your in-house capabilities to
Training Tools
focus on their core competencies.
Examples of existing designs include:
* RF and IR Remote Controls
* RF Transmitters and Receivers
* Identification Systems
* Data Acquisition Systems
* PID Controls
* Statistical Analysis Battery Chargers
* Security Systems, Automotive Test Equipment
* Re-programmable Washing Machine Controllers
* Water Purification System Controllers
* Time Clock Data Logging Systems
* Distributed Networks
* Industrial Robotic Test Systems
* Fiber Optical Test Equipment
* Laser Controllers
* Temperature Data Loggers
FLC’s experience with other microcontrollers (68HC11, Z8, ST62, 8051, etc) has enabled them to convert
existing designs to PICmicro® microcontrollers, improving reliability and part count as well as reducing a
cost of production.
9
LABTRONICS International (Australia) Australia
Miroslav Kostecki
Consultants
12-28 Gilles St.
Design
Adelaide, South Australia 5000
Australia
TEL: (08) 8 231 5966
FAX: (08) 8 231 5266
Email: labtron@chariot.net.au
web: www.chariot.net.au/~labtron
Sharing our experience in PICking winners; The winners we have so far; PICPLC Programmer Controller 8
based on PIC16F84 for many, endless control solutions. LEDFUN 8-in-1 single board educational kits -
being incorporated into school curriculum. EVERSAFE UPS Line Interactive Uninterruptable PowerSupply
Training Tools
for clean power backup. SONIC HOPPER Educational Robots for students to appreciate how flexable
PICmicro® microcontrollers are. LED Display Systems - Lowering costs of graphical signs / displays for
advertising.
Training Tools
Denis Stevens
34 Herron Crescent
Latham Act, 2615
Australia
TEL: (61) 2 6225 5055
FAX: (61) 2 6255 1457
Email: vsb@vab.com.au
web: www.vsb.com.au
Collectively VSB staff have many years of experience in the design of embedded system hardware and 8
software. Projects developed by VSB staff using Microchip Technology components fall into two broad
categories; industrial and motorsport electronics. A brief description of the projects undertaken in each of
Training Tools
these areas is provided below. In all of these projects we designed both the hardware and the associated
software.
PICking winners all the time. Happy to share our experience at PICking winners!
Consultants
web: www.amerisys.com
Design
RF Transaction - telecom, industrial, transport.
8
Training Tools
Products designed have included Scrambled Pay TV encoders and decoders, Closed caption decoders,
CATV converters, Battery chargers, Telephone dialer devices, Infrared communication devices, Carrier
current signaling devices, RF signaling devices, BTSC (stereo TV) encoders and decoders, TFT (LCD)
display interface devices.
Training Tools
Dana Raymond
23-11 Harrisford St.
Hamilton, ON L8K 6L7
Canada
TEL: 905 573-8728
FAX: 905 548-9133
Email: dfr@icom.ca
Embedded systems for industrial/commercial applications.
8
Headline Technologies Ltd. Canada
Training Tools
Mitchell Burton
#105-5512 East Hastings St.
Burnaby, BC V5B 1R3
Canada
TEL: 604 291-9334
FAX: 604 294-9393
Email: mburton@uniserve.com
Founded in 1993, Headline Technologies Ltd. specializes in consumer electronic hardware and software
product development. We provide engineering design consulting services, including R&D project
management. Areas of our experience are analog, mixed-signal, and digital hardware design
microcontroller software development (including the PICmicro® microcontroller family), DSP software
development, FPGA and ASIC development. DOS™/Windows® software development. We pride ourselves
in our professional and expedient services.
Project we have designed include DSP based music synthesizers, analog filters, battery charger, cable set-
top box, underwater SCUBA communications gear, DGPS receiver, infrared analog and digital
communications, ASIC & FPGA designs, telecommunications IC evaluation board, touchpad mouse and
Windows® 95 software.
Consultants
Design
8
Training Tools
Training Tools
Lucien Potvin
29 Goulding Crescent
Kanata, ON K2K 2N9
Canada
TEL: 613 591-0779
FAX: 613 591-8543
Email: lnp@igs.net
Analog, digital and microprocessor circuit design for firmware and software.
8
Micro Consulting Inc. Canada
Training Tools
Mike Gomes
6991 Millcreek Dr. Unit 1
Mississauga, ON L5N 6B9
Canada
TEL: 905 858-8284
FAX: 905 858-8275
Email: mikegomes@compuserve.com
Industrial, Medical, Consumer - Analog/ Digital Designs in Controls and Monitoring.
9
Ontrak Control Systems, Inc. Canada
Tom Fortin
422 Arnley St.
Consultants
Sudbury, ON P3C 1E7
Design
Canada
TEL: 705 671-2652
FAX: 705 671-6127
Email: tfortin@vianet.on.ca
web: www.ontrak.net
Ontrak Control Systems specializes in the design and manufacture of serial based (RS-232/RS-485) data
acquisition and control interfaces. Applications include industrial control, SCADA, data logging, ATE,
remote control, automotive, point-of-sale, medical instrumentation, data acquisition and robotics. Products 8
can be developed by modifying existing products (see Web page) or from the ground up.
Training Tools
Applications in service now include, remote data loggers, token dispenser controllers, flight simulator
interfaces, automotive sensor monitors, remote telecommunications equipment monitors, stepper motor
controllers, quadrature encoder interfaces, PLC I/O expanders, truck scales, temperature controllers and
many others.
Prototype and production runs from 1 to 1000+ units can be assembled, calibrated and tested in our facility.
Complete engineering and user documentation options available.
In addition to their extensive experience in industrial and embedded controls, ProControl also offers
expertise in data acquisition, data collection, alarm systems, telephony, and point-of-sale terminals.
Custom design, which is the bulk of Soundsculpture’s work, focusses on wireless data transmission, motor
control, and lighting control. Recently completed designs for commercial customers include the Tymestart
car-starter system, the SwingPro golf swing analyzer, and the Revolution line of multi-frame advertising
signs.
Training Tools
Antonio Nucaro
210 Cochrane Drive, Unit 6
Markham, ON L3R 8E6
Canada
TEL: 905 479-0148 ext. 24
FAX: 905 479-0149
Email: anucaro@baranti.com
web: www.baranti.com
From small start-ups to Fortune 500 companies. Baranti provides contract electronic design & 8
manufacturing services to these companies, companies like yours, across the US and Canada.
From data encryption to digital video, from telecom to toys, healthcare to household, automotive &
Training Tools
automation… Our customers include major manufacturers of consumer, commercial, and industrial
electronic products covering a broad range of markets.
Why do companies out-source their electronic design & manufacturing to us? Because we enable our
customers to utilize top R&D & manufacturing resources, right now, without the overhead or ramp-up time.
TILCO Canada
Leo Cahalan
209 Ellerslie Ave
North York, ON M2N 1Y3
Canada
TEL: 416 512-2904
FAX: 416 512-6582
Email: tilco@home.com
With over five years experience using Microchip Technology’s PICmicro® microcontrollers, Tilco provides
extensive hardware and software design expertise. Tilco has a strong background in designing integrated
data logging and process control systems comprising of low cost embedded controllers, networked to a PC
or high level 16/32-bit controller card.
Products developed include, multiplexed security systems, access control systems, data loggers,
telephone dialers, remote control encoders, building management systems, communication systems, RS- 9
232/485 buffered multi port serial cards and LCD terminals.
Consultants
Design
8
Training Tools
Training Tools
Paul Sterling
PO Box 21024
Valhalla, 0137
So. Africa
TEL: (27) 12 651-5789
FAX: (27) 12 651-5404
Email: PaulSterling@SAfrica.com
Paul Sterling has been pioneering industrial microcontroller systems since the inception of the first 8-bit
8008 microprocessor in 1972. 8
Hardware and software microcontroller design experience ranges from small dedicated applications,
through digital/analog PID controllers, up to very large networked distributed process control systems.
Training Tools
Being a member of Electronic Emulation’s team who designed the novel ICEPIC™ in-circuit-emulator for
the full range of Microchip Technology PICmicro® microcontrollers in 1994, very detailed operational
knowledge of all PICmicro MCUs has been gained. This vast practical experience is available to industry
as a consultant service, especially in the latest techniques applicable to all PICmicro MCU devices.
P.A.R.C. NV Europe-Belgium
Rudy van Malderghem
Vossestraat 32
Gavere, B-9890
Belgium
TEL: (32) 9384 9430
FAX: (32) 9384 9431
Email: parc.rudy@glo.be
Medical, automation, telecom, agriculture, machine drivers, controllers.
Consultants
TEL: 420 2 573 123 78
Design
FAX: 420 2 573 123 78
Email: pola@asix.cz
web: www.asix.cz
Customer application as well as our own designs.
8
Training Tools
PICATECH Europe-Denmark
Itamar Cohen
Ahornvej 27
Thisted, DK 7700
Denmark
TEL: 45 96 194407
FAX: 45 97 910890
Email: IT@BILINFO.DK
web: www.3w.pricatech.dk
Industrial Control
ADISON Europe-France
Training Tools
Jean-Pierre Verard
452, rue des Sources
Cidex 112 A, Crolles 38920
France
TEL: 33 4 76 98 08 87
FAX: 33 4 76 92 08 89
Email: adison.jpv@wanadoo.fr
8
Alpes Deis Europe-France
M. Chaumontet
Training Tools
300 rue des techniques
Marignier, 74970
France
TEL: (33) 4 50 89 24 00
FAX: (33) 4 50 89 24 01
Email: brun@alpes-deis.fr
web: www.alpes-deis.fr
Alpes Deis is a ten year old company with 15 employees and 7,3 millions french franc turnover per year.
Their specialties include: Man Machine Interface Simulation (using a product before it exists); Electronic
Design (performances, reliability and low-cost); Process Engineering; and they are very convenient for high
volume production such as automotive or home appliances.
PICmicro® microcontroller embedded control applications developed by Alpes Dies include: Electronic
control unit for automotive; Temperature control, cookers (home appliances); Emergency exits (building);
Machine tools for the manufacturing and rebuilding of internal combustion engine cylinder heads
(Industrial); Coffee Machines (Office) and Decoder for green watering.
Among Alpes Deis’ clients are Tefal, Calor, Seb, Thomson, Scholtes, Noirot, ELM Leblanc, Valeo, Rockwell,
DAV, Striebel, Siebe, EDF, France Telecom, Alacatel, HPF, JPM, SERDI, SNR, Nestle and Somfy.
Amicelec Europe-France 9
Jean-Claude Gaydu
3, Rue de la Fontaine
Consultants
Boissy St Leger, 94470
France
Design
TEL: (33) 1 45 95 93 31
FAX: (33) 1 45 69 39 86
Email:
Industrial, consumer, motor control
8
Training Tools
TELLOG Europe-France
Jean-Paul Comte
35 rue Picasso
Guyancourt, 78280
France
TEL: (33) 1 30640378
FAX: (33) 1 30430775
Email: tellog@francemultimedia.fr
Tellog specializes in Informations systems and transmission interfaces for large R&D companies as well as
end users organizations.
Training Tools
Martin Oppermann
Seebachstrasse 48
Dresden, D-01237
Germany
TEL: (49) 351 2814868
FAX: (49) 351-2814868
Email: Martin.Oppermann@t-online.de
Primary application specialties are controlling systems, data collector, and power management.
8
Training Tools
Schulstrasse 10
Kenzingen, D - 79341
Germany
TEL: (49) 7644 931251
FAX: (49) 7644 931252
Email: klingertec@t-online.de
Founded in 1996, TECTRON provides a complete solution from product design, development to
manufacturing. We at TECTRON are highly skilled in assembly, C and Windows® based systems. Our staff
is exceptionally qualified in the development of automation and fieldbus systems like "PROFIBUS", "LON",
"CAN","Internet" and "IEC1131-3". We have very good experiences and knowledge in CAN systems based
on a long period of development and technical support. In 1999 we designed a smart and very inexpensive
CAN-to-Internet gateway which will be available soon.
Product: "IP-Smart"
Description: Software package interfacing to TCP/IP, UDP, PPP, HTTP and FTP Hardware: PIC16C74A
and others
Product: "IPCAN"
Description: Gateway to interface a standard CAN network with Internet via PPP (GMS or Telephone)
Soft & Hardware (Schematics and/or printed circuit), plus IP-Smart driver package
Hardware: PIC16C7X, MCP2510, Internetchip
Product: "PICNet" 9
Description: CAN protocol 2.0A / 125 kbit/s max., fully implemented in software Hardware: CAN-One-Chip
solution based on PIC16C55X, PIC16CXXX or PIC12XX for ultra low cost applications
Consultants
Product: "EasyMail-2000"
Design
Description: Portable, inexpensive E-mail Computer with GMS and Telephone interface to send and
retrieve e-mails from a POP3 server.
Supports POP3 and SMTP protocol
Hardware: PIC16C74A, LCD (2*10), Internetchip, GMS interface.
8
Training Tools
Training Tools
Udo Weik
Lindenstrasse 2
Furtwangen, D-78120
Germany
TEL: (49) 77 23 / 91 20 83
FAX: (49) 77 23 / 91 20 43
Email: WeikEngOff@aol.com
Development of hard/software according to customers’ demands, especially using microcontrollers
(PICmicro® MCU) and in future PLDs. Looking for gaps in the market where PICmicro microcontrollers can 8
be used. There is a lot to do and I have many ideas.
Training Tools
Ingenieurbüro B. Blachetta Europe-Germany
Wolfgang Blachetta
Johann-Schmidt Str 15
Landsberg, 86899
Germany
TEL: (49) 8191-1895
FAX: (49) 8191-1895
Industrial automation systems, processor controlled power management.
Consultants
Design
Palaceware Europe-Germany
Josef Krem
Kaiser-Max-Strasse 10
Kaufbeuren, 87600
Germany
TEL: (49) 8341-8888
Measurements and control systems for industrial purpose. From sensor to database systems.
8
Training Tools
Training Tools
Klaus P. Stock
Furstenrieder Strasse 5
Munchen, 80687
Germany
TEL: (49) 089 54643087
FAX: (49) 089 584236
Email: klauspstock@compuserve.com
web: www.stock-partner.com
Stock & Partner specializes in remote sensing of data, A/D conversion CAN-Bus transmission. 8
Training Tools
Alfred Enterprises Europe-Ireland
John Alfred
Kerry Road
Adare, Co. Limerick
Ireland
TEL: 353 061 395-374
FAX: 353 061 395-375
Email: jalfred@iol.ie
Alfred Enterprises are specialists in PICmicro® microcontroller based designs with strong emphasis in
using C programming language where assembler was used in the past. They have developed techniques
for direct driving of LCDs by PICmicro microcontrollers as well as low cost 12-bit ADCs. Thermal printer
software drivers are a specialty. They offer custom design services for LCDs, membrane keypads, design,
plastic cases, extruded aluminum cases etc. Alfred Enterprises has the unique achievement of having
designed the electronics for the world’s first digital torque wrench to compete with mechanical wrenches on
price and performance.
Founder, John Alfred, holds M.Eng. and MBA degrees from the University of Limerick. With 20 years of
experience, he has worked for DEC, Analog Devices, Intepro Systems, etc., in various engineering
positions from manufacturing to design. John Alfred has experience in the design of medical products,
industrial products (electronic torque wrenches, thermal printers), PC-cards and automatic test equipment.
He has expertise in Digital, Analog electronics and C-programming. Battery powered handheld products 9
are a specialty. Based from home, the best way to contact him is via e-mail.
Consultants
ALTER Electronic S.r.l. Europe-Italy
Design
Ugo Alessi
Via Goethe 30
Padova, 35124
Italy
TEL: (39) 049 8804252
FAX: (39) 049 8804252
Email: ugoale@tin.it
8
ALTER Electronic S.r.l. has experience in planning automotive, industrial controls, telescope controls,
optical and CCD systems, building automation systems, and fuzzy control systems (with extensive
Training Tools
experience with Fuzzy Logic) and now CAN transmission system. We use C language for programming
microcontrollers. We write software for PC applications in C++® for Windows NT®. We held training courses
in microprocessor, microcontroller design and programming, and in automation system control.
Now we are projecting hardware and software systems for industrial control and building automation
control. We use all types of Microchip Technology products, with the software written often in C language.
HardLab Europe-Italy
Andrea Sbrana
via Niosi, 10
Pisa, 56125
Italy
TEL: (39) 338-4890048
FAX: (39) 50 43416
Email: sisop@farm.unipi.it
Andrea Sbrana writes on periodic "PROGETTO" (JCE Editorial Group) about microcontrollers PICmicro®
MCU and Serial EEPROM Microchip. For these products, he has realized several programmers via
Centronics distributed by T.E.A. (+39 0544 464059). Mr. Sbrana wrote the book "La programmazione dei
microcontroller PIC", "L’impiego delle periferiche nei PIC" and "Introduzione ai microcontrollori" in Italian
language for schools, students, beginners and experts.
Andrea Sbrana is specialized in development hardware and software products for automotive, industrial
control, security systems and telecom. Andrea Sbrana does courses about PICmicro MCU programming.
Training Tools
Romito Sebastiano
Via Jenner, 14
Milano, 20159
Italy
TEL: (39) 02 69016272
FAX: (39) 02 6886068
Email: r.d@lambdasistemi.it
8
Microlabs Europe-Italy
Gordan Rancic
Training Tools
Via Venezia 14
Grezzago, MI 20056
Italy
TEL: (39) 2 9096 7467
FAX: (39) 2 9096 7469
Email: micropost@microlabs.it
web: www.microlabs.it
MicroLabs is a R&D company developing more than 30 projects per year. More than 15 years of experience
on microcontrollers and PC-based systems and 5 years with Microchip Technology products placed
MicroLabs among the top Italian R&D companies. Every project developed by MicroLabs passes TUV, EMI,
FCC, Ex or other certification. MicroLabs specializes in Industrial control, Communication, Security
systems, production lines and laboratory equipment. Some MicroLabs projects today have production
volumes of 1,000,000 pieces per year. MicroLabs also offers complete client services starting from project
design and development, industrialization and product design, and realization of production and testing
equipment.
MicroLabs has an internal hardware/software development team and PCB design, working on laboratory
equipment such as Tektronic, HP, Fluke and PC based systems 486, P-100. MicroLabs is also Microchip
Technology Italy technical support offering free Microchip on-line support in Italy.
9
MIR s.r.l. Europe-Italy
Miroslav Oltaca
Via Monte Grappa 14
Consultants
Gerenzano, (VA) 21040
Design
Italy
TEL: (39) 2 96481306
FAX:
Email: miroslav_oljaca@ieee.org
Primary applications specialities are power converters. Our industrial concentration is in motor control,
UPS, DC/PC, etc.
8
Training Tools
Training Tools
Alessandrini Gianluca
Via Faentina 175/A
Fornance Zarattini, Ravenna 48100
Italy
TEL: (39) 544 464059
FAX: (39) 544 462742
Email: gpekit@gpekit.com
web: www.gpekit.com
Microcontroller software development. 8
Training Tools
Quant Consultancy Europe-Netherlands
Johan Quant
Hamsterkoog 11b
Alkmaar, 1822 CD
Netherlands
TEL: (31) 72 564 44 24
FAX: (31) 72 562 48 79
Email: qconsult@worldaccess.nl
Embedded controller solutions for medium to big production series. Consumer products and professional
use consumer like goods (e.g., coffee brewers, electrostatic air purifiers, ventilation systems for buildings).
Consultants
Design
S. M. Electronics A/S Europe-Norway
Saul Manashe
P. O. Box 436
Sarpsborg, 1701
Norway
TEL: (47) 69 16 7300
FAX: (47) 69 16 3710 8
Email: sauljane@telepost.no
PICmicro® microcontroller controlled power applications, LCD units, motor controls, temp controlled, etc.
Training Tools
Plantron AB Europe-Sweden
Dirk Handzic
Trangstad Asen
Toecksfors, S-67010
Sweden
TEL: (46) 573 62090
FAX: (46) 519 62075
Plantron AB is a full-service engineering firm providing services which include system design, hardware
design, software engineering and even complete project management.
TADCO Europe-Sweden
Tor Anderson
P. O. Box 193
Torslanda, S-42322
Sweden
TEL: (46) 31 923750
FAX: (46) 31 923751
Email: tadco@tadco.se
web: www.tadco.se
We specialize in technical solutions for the automotive industry. We have experienced programmers and
hardware designers in most areas, including C/C++®, embedded real-time systems and communication
protocols such as CAN.
A.D.Developments Europe-U.K.
Training Tools
Frank Sheppard
5 London Road
Loughton, Milton Keynes MK5 8AB
U.K.
TEL: (44) 1908 666400
FAX: (44) 1908 670587
Email: add@primex.co.uk
A.D. Developments was founded in 1983. Specialists in microcontroller based projects having completed
over 25 designs with the PICmicro® microcontroller range since be coming registered Microchip 8
Technology consultants in 1992. We have used various PICmicro MCUs throughout the range, from the
PIC16C54 through to the PIC17C44. Production volumes range from 1 off units to several hundred
Training Tools
thousand.
Hardware: Circuit design (analogue and digital); PCB layouts; Mechanical design (using AutoCAD);
Prototypes; Small batch production in house.
Software: Embedded software using Assembler and C; Windows® based applications using C.
Past Projects include: Data Capture systems. Multiplexed lighting system used in the motor racing industry.
Encoder System - a low end PICmicro MCU and EEPROM used in a high volume product (over 1 million
units to date). Hand held RS-232 terminal with a membrane keyboard, LCD and custom software. Motor
speed control system for environmental air sampling.
Consultants
The primary industry concentration is the small business have no in-house design.
Design
A&M Bromley Ltd. Europe-U.K.
Andrew Bromley
1 The Towers - College Road
Buxton, Derbyshire SK17 90Z
U.K.
TEL: (44) 1298 7716
8
FAX: (44) 1298 22044
Email: andrew@ambromley.co.uk
Training Tools
web: www.ambromley.co.uk
Our specialty is in heating ventilation and air conditioning (HEVAC). Mainly dealing with power control for
heating, lighting and small motors. DC Motor control.
Training Tools
Tony Leggett
14 Lethbridge Rd.
Southport, Merseyside PR8 6JA
U.K.
TEL: (44) 1704 534382
FAX: (44) 1704 534382
Email: tony@apl.enta.net
web: www.apl.enta.net
APL has been involved in the design of embedded systems since 1982 and an enthusiastic PICmicro® 8
microcontroller user since 1990.
In this time APL has carried out the design and development of a wide range of applications, from battery
Training Tools
powered data logging to pick & place robotics systems. The range of clients includes large multinational
companies to small companies who lack the relevant in-house expertise in microcontroller system design.
The range of services includes the design of both hardware, software, and PCB layout. Production of both
surface mount and conventional designs can be arranged if necessary.
Recent projects using the PICmicro MCU families include: single phase and three phase power controllers,
industrial controllers with LED and LCD displays, DC motor control for mobile vehicle applications, HVAC
smart sensors and controllers, environment monitoring/control system, automotive safety monitoring,
scientific instrumentation.
Consultants
Design
8
Training Tools
Training Tools
Harold Convey
Technology Development Unit
Deane Road, Bolton BL3 5AB
U.K.
TEL: (44) 120 452 8851
FAX: (44) 120 437 0916
Email: H.Convey@bolton.ac.uk
Technology development and transfer schemes with small medium enterprises technology support center
involving micro electronics. 8
Training Tools
Citadel Products Ltd Europe-U.K.
Vic Cedar
50 High Street
Edgware, Middlesex HA8 7EP
U.K.
TEL: (44) 81 951 1848
FAX: (44) 81 951 5857
Email: vic@citadelproducts.ltd.uk
Since their founding in 1960, Citadel Products Ltd. has specialized in the design, manufacture and
development of a wide range of products in the electronics field that include gas detectors, intruder alarms,
automotive alarms and RF paging systems. The production and development of computer peripherals has
been underway since 1978, with a range of keyboards, terminals, modems, memory cards, digital scanners
and controller boards for laser printers. Citadel also supplies a comprehensive range of device testing and
programming equipment.
Research and development are carried out at Citadel’s specially designed plant and main office in
Edgware, in conjunction with their volume production facility at Barnstaple, Devon. In-house design
disciplines cover both software and hardware using advanced CAD-CAM techniques.
Citadel’s client base includes many blue chip corporations, utility companies and various departments of
both the UK and overseas governments.
9
Consultants
Graham Coast
Design
48 Sundridge Drive
Walderslade, Kent ME5 8HT
U.K.
TEL: (44) 0 1634 660157
FAX: (44) 0 1634 672093
Email: gcoast@coastel.demon.co.uk
web: www.coastel.demon.co.uk
Coast Electronics are market leaders in the manufacture and supply of data management and analysis 8
instrumentation and systems. Our comprehensive range of products and services offer professional cost
effective solutions.
Training Tools
Training Tools
Lyndon Owen
The Barn, Saw Hill Farm,
Triangle Sowerby Bridge, West Yorkshire HX6 3DP
U.K.
TEL: (44) 0 1422 825265
FAX: (44) 0 1422 825265
Email: lyndn@jawbone.demon.co.uk
web: www.jawbone.demon.co.uk
Primary industry concentration is in Telecommunications, Control & Instrumentation, Industrial automation, 8
mining, & process industries.
Training Tools
Eyebright Design, Ltd. Europe-U.K.
J. D. Russell
107 The Heath, Wolvey
Hickley, Leicestershire LE10 3HJ
U.K.
TEL: (44) 145 522 0835
FAX: (44) 145 522 0895
Email: jr@eyebright.demon.co.uk
Our main roles are feasibility studies, project management (providing ’turn-key’ solutions), design,
development, prototype assemblies and low-volume production.
Consultants
Design
8
Training Tools
Training Tools
Geoff Bostock
31 The Maltings
Charlton Estate, Shepton Mallet, Somerset BA4 5QE
U.K.
TEL: (44) 1749 944406
FAX: (44) 1749 942001
Email: millgreen@cncom.net
Primary application specialities are motor controls.
8
Training Tools
Mike Lloyd
Pipers Wooden Barn
Clarendon Estate, Salisbury SP5 3ES
U.K.
TEL: (44) 1722 711144
FAX: (44) 1722 711531
Email: info@ml-electronics.co.uk
web: www.ml-electronics.co.uk
MLE has wide experience of working in the medical, commercial, industrial and military / aerospace
sectors. We are ISO9001 quality accredited and provide services including consultancy, design,
manufacture and production support.
Typical design applications include instrumentation, power supply, motor drive control, communications,
interfaces, GPS, display systems and software using analogue and digital electronics in conjunction with
PICmicro® microcontrollers. Power supply: AC-DC, DC-AC, DC-DC, UPS and switch mode. Motor drive
control: Various drive control technologies including for DC brushless and switched flux motors.
Communications and interfaces: RS-232 / RS-485, fieldbus / profibus, USB, remote data applications,
modems, GPS datalogging and RFID tagging. Display systems: LCD / LED intelligent mimic panels to
remote display screens for domestic use. Instrumentation: We have a broad experience of instrument,
control and signal circuit design using both integrated and discrete components. Electronic product and
prototype design 9
By using in house CAE simulation software, PCB design software and prototype PCB manufacture we can
provide rapid product/prototype designs. Once designed, our manufacturing facility allows testing of the
Consultants
complete documentation package. Our knowledge of a wide range of electronic technologies and
manufacturing techniques allows us to design competitive products that may be smaller and more power
Design
efficient than present designs.
We design using state-of-the-art leading edge electronics and benefit from being a member of the highest
level (gold) Arizona Microchip Technology consultants program. To many of our customers MLE is
perceived as an extension of their in-house design team. We believe that our specialist skills provide very
cost effective design solutions, producing a large saving over the product lifespan by increased reliability,
efficiency and functionality.
8
Training Tools
Training Tools
Vic Lovett
2 Bellevue Road
Barnes, London SW13 0BJ
U.K.
TEL: (44) 181 392 2790
FAX: (44) 181 392 9968
Email: info@protaset.demon.co.uk
web: www.protaset.demon.co.uk
Protaset Ltd. is an electronic design, manufacturing and consultancy company founded in 1980, based in 8
London. We have experience in: Feasibility Studies, Hardware, software, firmware and mechanical design.
State-of-the-art and obsolete components including embedded microprocessors, programmable logic,
Training Tools
discrete logic and analog circuits. PC/Macintosh interfaces, point-of-sale terminals, hand-held consumer
goods, picture editing, ADPCM voice synthesizers, monitoring systems, industrial controls, and
communications units for networks and PSTN. Designing simple fast processors for specific tasks. Boards
for PDP11 and other minicomputers. Working with a wide range of interface standards. Reverse
engineering of otherwise unavailable boards and equipment. Production engineering designs from the
prototype stage. Obtaining the required approvals, for the UK and overseas, including BABT, EMC, Low
Voltage, and Medical Devices Directives, so that the related devices may legally be CE marked.
Consultants
working both the rigorous demands of Nuclear Industry and the cost-consciousness of the Security sector.
Design
The service we offer extends from writing code writing to complete product design, development &
manufacture.
Our manufacturing facility produces anything from prototype quantities to bulk production runs of many
thousand units. Although we cover all industries, we have considerable experience in drinks-dispense,
coolers, shower/jacuzzi, water-treatment, light and security-alarm controllers.
We specialize in a close liaison with our customers throughout a project to ensure that the final product
comes to market swiftly and exceeds expectations. We very often work with clients who have little 8
knowledge of what is possible with a microcontroller and therefore, with consultation in the early design
stages we can give advice on maximizing product potential. We are very user-friendly.
Training Tools
Training Tools
Stepan Tatulian
Perivale Industrial Park - Unit 20
Perival, Middlesex UB6 7RA
U.K.
TEL: (44) 1817 587 000
FAX: (44) 1817 587 098
Local process automation controllers where algorithm cannot be accomplished with a few PLDS.
8
Village Designs Ltd Europe-U.K.
Jim Downie
Training Tools
3 Green Street
Strathaven, Lanarkshire ML10 6LT
U.K.
TEL: (44) 1357 20914
Industrial Control
Consultants
U.K.
TEL: (44) 181 508 4155
Design
FAX: (44) 181 502 3720
Email: wwl@netcomuk.co.uk
Primary application specialities are control, instrumentation, computer peripherals, cost reduction
engineering, hazardous area (intrinsic safety, etc).
8
Training Tools
Training Tools
Ravindra Karnad
No. 22, 2nd Cross Off Beml Salvage Rd.
G.M. Palya, New Thippasandra, Bangalore 560 075
India
TEL: (91) 80-5248746
FAX: (91) 80-5242746
Email: ravindra.karnad@gems.vsnl.net.in
8
Martin’s Electronic Devices & Instruments India
Martin Xavier, P.A.
Training Tools
39/2067, Manikkiri Cross Rd.
Ernakulum, Cochin 682016
India
TEL: 91 484 367459
FAX: 91 484 37459
Email: medimail@vsnl.com
web: www.start.at/medi
Consultants
development systems including in-circuit emulator(s) for PICmicro microcontrollers. NeoSystem Solutions
Design
undertakes UI/front ends for embedded controls systems and instrumentation/test applications.
Experienced in porting DOS™ and UNIX application to Microsoft Windows, X-Apps to Motif.
8
Training Tools
Sarcomm Mexico
Ezequiel De Leon
Isabela Catolica #412 Col. Roma
Montrey N.L., C.P. 64700
Mexico
TEL: (52) 8 359-1104
FAX: (52) 8 359-1104
Email: sarcomm@correo.palm.com.mx
Data transmission and logic interface for transmission.
NOTES:
Training Tools
8
Training Tools
9
Consultants
Design
8
Training Tools