Highly Active Pre-Reduced Catalyst for Ammonia Synthesis
AmoMax® 10RS is a highly active wustite-based ammonia synthesis catalyst, which is manufactured by reduction and subsequent stabilization of oxidic AmoMax 10. Pre-reduction not only shortens start-up time, but also decreases the formation of reduction water during activation. AmoMax 10RS is non-pyrophoric at ambient temperatures and can be easily handled and loaded following our operating constructions. As with the oxidic form, AmoMax 10RS offers outstanding activity – much higher than magnetite-based ammonia synthesis catalysts. This significantly increases ammonia yields and lowers costs, making AmoMax 10RS the optimal choice for the fertilizer industry. Registration number : Mixture Use of the Substance/Mixture : Catalyst for chemical reactions Company : Süd-Chemie AG Chemical nature: Mixture of iron/ iron oxide with dissolved potassium oxide, calcium oxide and aluminium oxide Composition: iron oxide ,iron, aluminium oxide , calcium oxide ,dipotassium oxide divanadium pentaoxide & other confidential components Health Hazard: Risk of serious damage to eyes. Extinguishing – Dry powder Foam Carbon dioxide (CO2) Unsuitable extinguishing media: Do not use a solid water stream as it may scatter and spread fire physical and chemical properties Appearance : granular Colour : black Odour : mildammoniacal Bulk density : 2500 - 2800 Kg/m3 Above 50°C, self-heating (possibly ignition) in contact with air can occur Hazardous reactions : Spontaneously flammable in air. Product Composition- Wustite Size-1.5 to 3.0 mm Shape- Irregular shape granules with rounded ends AmoMax®-10 Conventional ammonia synthesis catalysts are made of magnetite (Fe3O4) with a number of structural and electronic promoters. However, Süd-Chemie now is manufacturing an ammonia synthesis catalyst on the basis of a nonstoichiometric ferrous oxide, so-called wustite (Fe1-xO). Wustite has a cubic crystal structure compared to the spinel-like structure of magnetite. This allows to provide a catalyst with an improved pore structure, higher surface area and better mechanical strength. The designation of the novel catalyst is AmoMax10. The catalyst is supplied in its oxidic form and is also available as pre-reduced and stabilized in air. Registration number : Mixture Use: Catalyst for chemical reactions Chemical nature : Mixture of iron oxide, calcium oxide, aluminium oxide Health Hazard- Risk of serious damage to eyes Respiratory Protection: Half mask with a particle filter P2 Hand Protection: Chemical-resistant protective gloves Eye protection : Safety glasses Physical and chemical properties Appearance : granular Colour : blackmetallic Odour : none Melting point : > 1300 °C Density : 3 g/cm3 Bulk density : 3000 - 3500 Kg/m3