Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 6

CHAPTER NO.

3
BASIC RATES OF MATERIALS
NOTES
(I) All the rates in this chapter are for Materials at the source except where specific otherwise.
(II)The rates are for the purpose of analyzing the rates, and not for obtaining supplies from market, which shall be
contained after calling competitive tenders or quotations. In case of bricks and tiles, the tendered rates shall not be
more than controlled rates, fixed by the Deputy Commissioner of the respective districts, the Food and Supplies
Department, of Haryana State.

(III)The rates for item Nos. 3.1, 3.2 and 3.3, include the cost of land and water. In case where land and water is
give by Government, free of cost, the rates shall be suitably reduced.
(IV)   The rates of Portland cement, in item no. 3.12 is for analysis and not for the purpose of issuing cement to
contractors. The issue rate for cement shall be fixed by the Executive Engineer after taking into account, any extra
lead, involved from railway station.

 (V)    The size of bricks in item Nos. 3.1 and 3.2 will be 22.86 cm X 11.11. cm X 6.83 cm and tiles for item no. 3.3
wil be:-
(i)                  30.48 cm X 15.24 cm X 5.08 cm
(ii)                22.86 cm X 11.43 cm X 3.81 cm
(VI)Two classes of rates of paint have been provided in this chapter for estimating purpose only. Firstly, for first
quality paint of best quality of reputed firms such as Goodless-Nerolac, Berger, Garware, Jenson Nicholsen, Asian
and Shalimar etc. In the trade mark of Nerolac, Luxury Eomite/Garcoat, Brolac, Apcolite and superlock
respectively or its equivalent are considered as a quality rates of paint and secondly second quality paints of reputed
firms in the trade mark of Glossolite, Parrot, Kinglac, Jensolin, Three mangoes and Durolac or its equivalent and
I.S main paints are considere second quality rates of paints.

(VII)      Unless specified to the contrary, the labour rates for various items of construction include handling of
materials within 100 metres. The Through rates include all rehanolling of material at the site of work, and no
payment is due to the contractors on this account.

Sr. no. Description Unit Rate Referenc


e to PWD
specificat
ion

1 2 3 4 5
(a) Bricks and Tiles
3.1 Sun dried bricks at Kiln site 1000 nos. 76.00 3.50
3.2 Bricks 22.86 cm X 11.11 cm X 6.83 cm band moulded at Kiln site-: 1000 nos.
(i)                  First class 1000 nos. 450.00 3.50
(ii)                Second class 1000 nos. 400.00 3.50
(iii)               Third class 1000 nos. 315.00 3.50
(b)Brick Bats and Ballast 3.50
(a) Brick bats from well burnt or over burnt bricks cum 58.00 3.50
(b)    Brick ballast from well burnt or over burnt Bricks or brick bats:- cum
(i)                  40 mm nominal size cum 70.00 3.70
(ii)                31.50 mm nominal size cum 75.00 3.70
(iii)               nominal size 20 mm cum 80.00 3.70
(c) Tiles Hand Moulded at Kiln Site
3.3 (i) size 30.48 cm X 15.24 cm X 5.08 cm 1000 nos. 650.00 3.60

Page
file:///conversion/tmp/activity_task_scratch/590447923.xls
1
(ii) size 22.86 cm X 11.43 cm X 3.81 cm 1000 nos. 550.00 3.60
(d) Lime and Surkhi etc.
3.4 White (stone or non hydraulic) lime unslaked:-
(i)   F.O.R. destination station in wagon load Qtl. 90.00 3.80
(ii) Delivered at site of work for small Requirements upto 4 quintals Qtl. 100.00 3.80

(iii) Factory made dry hydrated lime conforming To I.S. 712-1973 in Qtl. 90.00 3.80
bags at site.
3.5 Surkhi prepared from well burnt bricks ground and Screened at cum 75.00 3.90
source
3.6 Cinder screened at site cum 50.00 3.10
(e) Sand and Stone Aggregates cum
3.7 (a) Fine sand clean and screened within 30 metres, excluding cum 21.00 3.11
washing but including royalty where removal of over burden of soil
to any depth is necessary
(b)    Fine quarried aggregate (coarse sand) for concrete from the cum
following quarries-:
!.                   Ghaggar and Chandi Mandir cum 12.40 3.30
!!.                   Radarpur Near Delhi (washed) cum 100.00 3.30
3.8 Kankar including digging, breaking and Cleaning, duly stacked at cum 13.00 3.33
quarry
3.9 Peulders including digging and collection (including Royality, cum 20.00 3.31
Malkana etc)
3.10 Shingle from natural shingle deposits within a lead of ISO metres cum
including digging and screening , but not washing
(i)                  10 mm size cum 74.20 3.29
(ii)                15 mm size cum 67.10 3.29
(iii)               20 mm size cum 67.10 3.29
(iv)              25 mm size cum 67.10 3.29
(v)                40 mm size cum 49.50 3.29
(vi)              50 mm size cum 45.90 3.29
(vii)             75 mm size cum 35.30 3.29
3.11 (a) Coarse aggregate for concrete or stone ballast from quarried cum 3.29
stone:-
(i)                  40 mm nominal size cum 54.00 3.29
(ii)                25 mm nominal size cum 70.00 3.29
(iii)               20 mm nominal size cum 70.00 3.29
(b)                From Boulder Stone-: cum 3.29
(i)                  40 mm nominal size cum 64.00 3.29
(ii)                25 mm nominal size cum 67.00 3.29
(iii)               20 mm nominal size cum 70.00 3.29
3.12 Machine-crushed stone bajri at crusher site:- cum 3.29
(i)                  12 mm nominal size cum 80.00 3.29
(ii)                10 mm nominal size cum 80.00 3.29
(f) Cement
3.13 Portland cement including bag at PWD Godown including storage per bag 56.60 3.12
charges of 50 kg

Page
file:///conversion/tmp/activity_task_scratch/590447923.xls
2
3.14 White cement including bag at site per bag 220.00 3.13
of 50 kg
(g) Steel
3.15 (a) Mild steel at PWD Godown including storage charges-: Qtl.
(i)                  burs Qtl. 767.00 3.20
(ii)                flats/plates Qtl. 833.00 3.19
(iii)               joists Qtl. 888.00 3.19
(iv)              angles Qtl. 827.00 3.19
(v)                channels Qtl. 860.00 3.19
(b)    deformed bars (tor/ribbed steel for reinforcement) at PWD
godown (including storage charges)
(i)                  bars Qtl. 815.00 3.22
3.16 Galvanised iron sheet 0.80 mm thick tested plain or corrugated at site Tnne 13350.00 3.27
of work.
3.17 Galvanised iron wire at site of work 3.25 mm, 4mm, and 4.75 mm dia Qtl. 1100.00 3.26

3.18 Timber at site of work


(i)                  deodar in sleepers cum 9000.00 3.15
(ii)                teak in scantlings cum 14800.00 3.15
(iii)               kail in sleepers cum 6100.00 3.15
(iv)              sal in scantling cum 6100.00 3.15
(v)                cheel (chir) in sleepers cum 4200.00 3.15
(vi)              commercial hard wood such as hillock, champ, chikrassy cum 5750.00 3.15
and chaplash etc. (non coniferous timber other than teak conforming
to I.S. specification No. 1003 kiln seasoned)
(I) Boards
3.19 (a) Natural colour insulating boards, such as celotex sheeting at site sqm 90.00 3.42
of work 12 mm thick
(b) White faced insulating board perforated celotex sheeting at site sqm 103.00 3.42
of work 12 mm thick
3.20 Commercial Ply-wood 4 mm thick 3 ply at site Of work sqm 53.00
3.21 Glass panes at site of work:- sqm
(a) Plain sqm
(i)                  2 mm thick sqm 44.00 3.16
(ii)                3 mm thick sqm 66.00 3.39
(iii)               4 mm thick sqm 80.00 3.39
(b)                frosted sqm 3.39
(i)                  2 mm thick sqm 56.00 3.39
(ii)                3 mm thick sqm 78.00 3.39
(iii)               4 mm thick sqm 92.00 3.39
(c)                Plate glass 5.50 mm thick (Indian) sqm 125.00 3.39
(j) Asbestos Products sqm
3.22 Asbestors cement products at site of work sqm
(i)                  Plain ceiling boards sqm
(a)                4.00 mm thick sqm 41.00 3.46
(b)                5.00 mm thick sqm 52.00 3.46
(c)                6.00 mm thick sqm 64.00 3.46

Page
file:///conversion/tmp/activity_task_scratch/590447923.xls
3
(ii)                corrugated sheets 7 mm thick sqm 56.00 3.46
(iii)               corrugated sheets 6 mm thick sqm 53.00 3.46
(iv)              semi corrugated sheet 7 mm thick sqm 54.00 3.46
(v)                semi corrugated sheets 6 mm thick sqm 51.00 3.46

(vi)              ridges 1.10 metres long Pair 47.00 3.46


(vii)             valley gutters 45 cm X 12.5 cm X 15 cm in 2 metres length Each 110.00 3.46
(viii)           plain bend 100 mm dia Each 7.50 3.46
Each 3.46
(ix)              swan-neck 100 mm dia Each 7.50 3.46
(x)                hexagonal rain water head 33 cm X 24 cm Each 10.00 3.46
(xi)              shoe 100 mm dia Each 7.50 3.46
(xii)             rain-water pipe 100 mm dia Mtr. 10.00 3.46
(k) C.I Pipes
3.23 Cast iron rain water pipe and fitting at site of work:-
(i)                  C.I rain water non pressure pipe 100 mm Mtr. 65.00 3.14(2)
(ii)                H.C. I soil pipe 100 dia I.S.I mark Mtr. 71.00 3.14(2)
(iii)               C.I Head 100 mm dia Each 25.00 3.14(2)
(iv)              C.I. Shoe 100 mm dia Each 20.00 3.14(2)
(l)Fittings
3.24 Door and window fittings at site of work:- 100 nos.
(a) Iron 100 nos.
(i)                  butt hinges 50 mm 100 nos. 115.00 3.38
(ii)                butt hinges 75 mm 100 nos. 136.00 3.38
(iii)               butt hinges 100 mm 100 nos. 247.00 3.38
(iv)              butt hinges 125 mm 100 nos. 370.00 3.38
(v)                tower bolts 200 mm 100 nos. 370.00 3.38
(vi)              screws 25 mm 100 nos. 282.00 3.38
(vii)             screws 40 mm to 50 mm 100 nos. 154.00 3.38
(viii)           hasp with staples 150 mm 100 nos. 165.00 3.38
(ix)              T-Hinges 300 mm 100 nos. 248.00 3.38
(x)                Screws 25 mm 100 nos. 7.00 3.38
(xi)              Screws 40 mm to 50 mm 100 nos. 17.00 3.38
(xii)             Hasp with staples 150 mm 100 nos. 300.00 3.38
(xiii)           T-hinges 300 mm 100 nos. 660.00 3.38
(b)    brass 100 nos. 3.38
(i)                  butt hinges 50 mm 100 nos. 280.00 3.38
(ii)                butt hinges 75 mm 100 nos. 528.00 3.38
(iii)               butt hinges 100 mm 100 nos. 1169.00 3.38
(iv)              butt hinges 125 mm 100 nos. 2224.00 3.38
(v)                tower bolts Linear cm 1.15 3.38
(vi)              handles 150 mm 100 nos. 1500.00 3.38
(vii)             screws 25 mm 100 nos. 27.00 3.38
(viii)           screws 40 mm to 50 mm 100 nos. 76.00 3.38
(ix)              hasp with staples 150 mm 100 nos. 1435.00 3.38
(c)    aluminium 100 nos. 3.38
(i)                  tower bolts 200 mm 100 nos. 995.00 3.38

Page
file:///conversion/tmp/activity_task_scratch/590447923.xls
4
(ii)                tower bolts 150 mm 100 nos. 834.00 3.38
(iii)               tower bolts 75 mm 100 nos. 533.00 3.38
(iv)              handles 150 mm 100 nos. 750.00 3.38
(v)                handles 200 mm 100 nos. 925.00 3.38
(vi)              hasp with staples 150 mm 100 nos. 850.00 3.38
(m)Wire Gauge
3.25 Wire gauge 140 or 120 G designation at site Of work sqm 40.00 3.25
3.26 Expanded metal 20 mm X 60 mm strands, 3 mm wide and 1.6 mm sqm 35.00 3.28
thick
(n)Marble Stone and Chips
3.27 (a) Marble Makrana/Narnaul chippings at site of work:- Qtl.
(i)                  white and black Qtl. 33.00 3.45
(ii)                red, chocolate and buff Qtl. 48.00 3.45
(iii)               green and blue Qtl. 50.00 3.45
(b)    White Dehradun marble chippings at site of work Qtl. 47.50 3.45
O Pigments
3.28 Pigments at stie of work:- Kg
(i)                  black, read and chocolate Kg 15.00 3.40
(ii)               orange, buff, yellow and pink Kg 18.00 3.40
(iii)             blue and green Kg 19.00 3.40
(P)Glazed Tiles
3.29. (a) White glazed tiles of first quality at site of work 5 mm thick 15 cm per dozen 32.00 3.43
X 15 cmsize
(b)                white glazed tiles of first quality at site of work 5 mm thick per dozen 16.00 3.43
10 cm X 10 cm size
(c)                coloured glazed tiles of first quality at site of work 5 mm per dozen 35.00 3.43
thick 15 cm X 15 cm size
(d)                coloured glazed tiles of first quality at site of work 5 mm per dozen 18.00 3.43
thick 10 cm X 10 cm size
(Q)Linoleum
3.30 3.30. Linoleum plain coloured at site of work (3.20Mm thick) sqm 100.00 3.41
(R) Distemper
3.31. Distempers of approved manufacture at site of Work:-
(i)                  Dry Qtl. 1300.00 3.36
(ii)                Oil-bound Qtl. 2000.00 3.37
(iii)               Distemper primer Ltr. 18.00 -
3.32 Exterior cement based decorative paint such as Snowcem, Robbia- Qtl. 1000.00 3.35
cem etc at site of work
(S) MISCELLANEOUS
3.33 Hessian cloth at site of work 1 metre wide and Weighting at 400 gm Mtr. 6.00 3.44
per metre
3.34 (a)bitument 85/25 at site of work tonne 4000.00 3.62
(b)bitumen 80/100 at site of work tonne 2980.00 3.62
3.35 (a)munj ban at site of work Kg 8.00 -
(b)plastic Niwar Kg 40.00 -

Page
file:///conversion/tmp/activity_task_scratch/590447923.xls
5
Sr. no. Description Unit Rate Referenc
e to PWD
specificat
ion

Ist 2nd
Quality Quality
(T) PAINTS
3.36.           Paints and other allied material at site of work-:

(i)                  Aluminium, wood primer Ltr. 39.00 31.00 3.34


(ii)                Pink primer Ltr. 38.00 30.00 3.34
(iii)               Metal primer Ltr. 38.00 30.00 3.34
(iv)              Synthetic enamel paint Kg 57.00 39.00 3.34
(v)                Ready mixed paint for wooden surfaces Ltr. 40.00 30.00 3.34
(vi)              Read lead genuine dry Ltr. 30.00 18.00 3.34
(vii)             cement primer Ltr. 33.00 - 3.34
(viii)ready-mixed emulsion paint for plastered or concrete surfaces Ltr. 70.00 - 3.34
(ix)ready-mixed exterior paint for plastered or concrete surfaces Ltr. 52.00 - 3.34
(x)ready-mixed exterior paint for metallic surfaces Ltr. 44.00 30.00 3.34
(xi)kerosene oil Ltr. - 2.47 3.34
(xii)caustic soda Kg - 6.00 3.34
(xiii)selignum Ltr. - 18.00 3.34
(xiv)copal Varnish Ltr. 32.00 16.00 3.34
(xv)            linseed oil Ltr. 27.50 18.00 3.34
(xvi)           creosote oil Ltr. - 8.00 3.34
(xvii)         bee’s wax Kg - 42.00 3.34
(xviii)        methylated spirit (with-out container) Ltr. - 9.00 3.34
(xix)           roofing red ready-mixed paint for corrugated sheet Ltr. 38.00 28.00 3.34
(xx)            roofing white, grey or green ready mixed paint for Ltr. 40.00 30.00 3.34
corrugated sheets.
(xxi)           floor paint Ltr. 50.00 - 3.34
(xxii)         aluminium paint Ltr. 43.00 34.00 3.34
(xxiii)        anit-corrosive odorless balck-bitumastic paint Ltr. 29 - 3.34
(xxiv)       anti-corrosive bitumastic paint Ltr. 26.50 20.00 3.34
(xxv)         turpentine oil Ltr. - 8.00 3.34
(xxvi)       road marking paint white Ltr. 64.00 38.00 3.34
(xxvii)      road marking paint spirit based yellow Ltr. 63.00 38.00 3.34
(xxviii)    road marking paint spirit based black Ltr. 38.00 27.00 3.34

Page
file:///conversion/tmp/activity_task_scratch/590447923.xls
6

You might also like