Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

BMC Ganj basoda mp

CLASS 12 A SESSION:: 2022-2023


Subject teacher:: Parag Purohit

Suggested investigatory projects::


PHYSICS

S.NO Topic Name

Topic1 Analysis the uses of capacitor in different circuit elements.


Topic 2 To study the variations in current flowing in a circuit containing LDR because of a
variation in
a) The power of the incandescent lamp, used to illuminate the LDR( keeping all the
lamps at a fixed distance).
b) The distance of an incandescent lamp(of fixed power) used to illuminate the LDR
Topic 3 To find refractive indices of a)water b) oil using a plane mirror, an equiconvex lens(made
from a glass of known refractive index) and an adjustable object needle
Topic 4 To investigate the relation between the ratio of 1) output and input voltage and 2) No of
turns in the secondary coil and primary coil of a self designed transformer
Topic 5 To investigate the dependence of the angle of deviation on the angle of incidence using a
hollow prism filled one by one, with different transparent fluids
Topic 6 To estimate the charge induced on each one of the two identical Styrofoam(or pith) balls
suspended in a vertical plane by making use of coulomb’s law
Topic 7 To study the factor on which the self inductance of a coil depends by observing the effect
of this coil, when put in series with a resistor/ bulb in a circuit fed up by an AC source of
adjustable frequency
Topic 8 To study the earth’s magnetic field using a compass needle bar magnet by plotting
magnetic field lines and tangent galvanometer
Topic9 Analysis the implementation of transformer in electrical system using drawing, paintings
etc
Topic10 Study the implementation of hydro electric power plant in Assam using art integration.

Topic11 Study and analysis the installation and working of any two solar power plants in India
using art integration.

Topic12 Study the installation, working and output of a wind mill power station in Dewas MP
using art integration related to environment.

Topic13 Study the designing of Astronomical telescope using art integration.


Topic14 To study various factors on which the internal resistance/ emf of a cell depend.
Topic15 Study and Analysis the working of Rectifier.
Topic16 Study the uses of physics and technology for the development of greenery and organic
farming in Madhya Pradesh.
Topic17 Study the various technologies in wireless communication using art integration.

Topic18 Study the uses of semiconductors in modern technologies.

Note:: Art Integration means link the project with


pictures, drawing, painting, sketching, story writing, culture
heritage, drama, observation table, chart, technical aspect,
cost etc
INSTRUCTIONS::
1. Project report should be hand written.
2. Use A4 size good quality white paper.
3. Project report should be in minimum 14 pages and maximum 25
pages.
4. Use blue pen, black pen, pencil, colour pencils etc.
5. For drawing circuit diagram, block diagram:: charts ,pictures
,images, sketching, painting and other arts is permissible.
Please do spiral binding of project report before final submission

You might also like