Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

PIS/QUT/STA/KS/2017/71 Dated 3rd AUG,2017

M/S .AL KARAM POLYMERS ,


LASSIPORA, SRINAGAR..

Sub: Requirement of Lubricated Screw Type Air Compressors

Dear Sir,

We thank you for above enquiry and are pleased to quote below for Ingersoll-
Rand Rotary Screw Air Compressor:

• Ingersoll –Rand Rotary Screw air compressor Model UP5-22-14 I capable


of delivering 82 cfm @14 brag with motor of 22KW.

The Screw compressor offered to you is a latest, smart generation, Air cooled,
Rotary Screw Air Compressor and is designed for reliability, takes up less floor
space and is easier to operate and maintain. Enclosed please find the following:

1. Scope of supply for Ingersoll-Rand Rotary Screw Air Compressor - Annexure I.


2. Price for Rotary Screw Air Compressor. – Annexure II.
3. Terms & Conditions - Annexure III.

We trust our Offer is in line with your requirement. Should you require any further
information/clarification, please feel free to contact us.

Thanking you and assuring you of our best attention at all times.

Yours faithfully,
For Pal Infrastructure Solutions,

(GAGANDEEP SINGH)
Mob-(9858513045)
Annexure I
STANDARD SCOPE OF SUPPLY
UP SERIES

UP5 Series with Microprocessor based Control

Compressor
• Bio-degradable synthetic coolant (Ultra Plus coolant)
• Oil flooded asymmetrical screw compressor
• Inlet Unloader System
• Dry Type air intake filter with 99.9% efficient @ 3 micron and above
• Spin on Oil filter
• Thermal Valve
• Closely coupled Airend Separator Module
• UM Coded Separator Tank
• Integrated MPCV with combination block
• Patented low sound enclosure (68dB(A))
• Backward curved blower for cooling
• Pressure relief valve
• Integrated Air/Oil cooler
• Poly -V belt drive with patented auto belt tensioning
• Panel filter for primary air filtration
• Inlet restriction Indicator

Intellisys Microprocessor Panel


• Adjustable operating parameters
• Off-line pressure 1
• Off-line pressure 2
• On line pressure 1
• On line pressure 2
• Star delta transition time
• Auto start and stop shutdown time
• Auto start and stop selector
• Sequence control On/Off
• Remote start/stop On/Off
• Control mode (On-line or Off line) (Modulation /ACS if fitted-Optional)
• Units of measure
• Load Delay
• Operation Warnings
• Change separator element
• Service due indicator (every 3000 hours)
• Fault Shutdowns
• High airend discharge temperature
• Low unloaded sump pressure
• High Sump pressure
• Starter failure
• Main Overload
• No supply voltage
• Remote start/ stop failure
• Reverse rotation
• Sensor malfunction
• Calibration error
• Over Pressure
Electrical
High Efficiency EFF1 Dual Shaft motor
400V, 50Hz, 3 Phase, TEFC, Squirrel cage Induction motor
IP55 motor protection with Class ‘F’ insulation
Annexure II

OFFER FOR COMPRESSED AIR SYSTEM

PRICE
Srl. Total Price (Rs) Ex.
No. Description Qty Works Jammu

1. Ingersoll-Rand Screw Compressor Model


UP-22-14 I complete with 22KW TEFC motor, Air
cooled, air and oil coolers, star delta starter, 1 No. Rs.4,25,520/-
microprocessor based Control Panel mounted on a
common skid.

NOTE:GST@28% WILL BE EXTRA ON ABOVE PRICE.

FREIGHT: FOR JAMMU.


RECOM MENDED LIFE OF CONSUMABLES FOR INGERSOLL RAND AIR
COMPRESSOR MODEL WITH USAGE OF ULTRACOLLANT

Srl. No Part Description Ingersoll Rand

1 Air filter 3000 Hours

2 Oil filter 2000 Hours

3 Separator Element Life 3000 Hours

4 Oil Life 8000 Hours


Annexure III
Commercial terms and conditions
Taxes & Duties:

1. Over the above price GST@28% will be charged extra.

2. Terms of Payment:
An advance amount of 50% along with Clear Order , the balance will be collected against
Proforma before Dispatch.

3. Delivery:
We will require a lead-time of 3 to 4 weeks,s for the despatch. This delivery shall reckon from
the date of receipt of your clear and firm order with advance and full release for manufacture.

4. Warranty:
The company agrees to have repaired at factory or furnish without charges, F.O.R. Works
where made, any part or parts; to replace material of company make which, within 12 months
from the date of starting and not more than 18 months after date of shipment, shall prove to
have been defective when shipped, provided the purchaser gives the company in writing
immediate notification of the discovery of such defect and immediately delivers the defective
parts to the works from where the material was shipped/supplied. The company’s liability for
damages caused by such defective part or parts shall be limited to repairing or replacing the
defective part or parts as herein above specified. No allowance will be granted for any repairs
or alterations made by the purchaser without the company’s written consent. For repaired or
replaced parts, extension in warranty is not acceptable.

5. Limitation of Liability:
The total liability of the company with respect to this contract or the equipment and services
furnished hereunder, whether based on contract, warranty, negligence, indemnity, strict
liability or otherwise, shall not exceed the purchase price of the unit of equipment upon which
such liability is based. The company and / or its suppliers shall in no event be liable to the
purchaser, any successors in interest or any beneficiary or assignee of this contract for any
consequential, incidental, indirect, special or punitive damages arising out of this contract or
any breach thereof or for any other direct or indirect loss, whether or not such loss or damage
is based on contract.

6. Freight: FOR JAMMU.

7. Supervision of erection and commissioning: We will depute our trained personnel for
supervision of erection and commissioning.
We are doubtless keen on associating ourselves with your group for your requirement of
compressed air systems and request we be provided the opportunity.

Thanking You,
Yours Faithfully,
For PAL Infrastructure Solutions,

You might also like