Professional Documents
Culture Documents
Digital Electronics
Digital Electronics
Digital Electronics
2. The output Qn of a J-K flip-flop is zero. It changes to 1 when a clock pulse is applied. The
inputs Jn and Kn are respectively
(a) 1 and X
(b) 0 and X
(c) X and 0
(d) X and 1
3. The larger the RAM of a computer, the faster is its speed, since it eliminates
4. DB, DW and DD directives are used to place data in particular location or to simply
allocate space without preassigning anything to space. The DW and DD directories are used
to generate
(a) offsets
(a)6
(b) 8
(c)12
(d) 16
6. The ESC instruction of 8086 may have two formats. In one of the formats, no memory
operand is used. Under this format, the number of external op-codes (for the co-processor)
which can be specified is?
(a) 64
(b) 128
(c) 256
(d) 512
7. The TRAP is one of the interrupts available its INTEL 8085. Which one of the following
statements is true of TRAP?
8. In a 16-bit microprocessor, words are stored in two consecutive memory locations. The
entire word can be read in one operation provided the first
9. A 3 x 8 decoder with two enable inputs is to be used to address 8 blocks of memory. What
will be the size of each memory block when addressed from a sixteen bit bus with two MSBs
used to enable the decoder
(a) 2K
(b) 4K
(c)16K
(d) 64K
The following . items consist of two statements, one labeled as ‘Assertion A ‘ and the other
labeled the ‘Reason R’. You are to examine these two statements carefully and decide if the
Assertion A and the Reason R are individually true and if so, whether the Reason is a correct
explanation of the Assertion. Select your answers to these items using the codes given below
and mark your answer sheet accordingly:
Codes:
10. Assertion (A): TTL and CMOS cannot be normally used together.
Reason (R) : .TTL operates on a (±5 0.25) V regulated supply voltage and some mA, while
the CMOS operates on unregulated supply voltage of +3 to +15 and some microA.
12.A JK flip-flop has its J input connected to logic level 1 and its K input to the Q
output. A clock pulse is fed to its clock input. The flip-flop will now
(a) 10 flip-flops
(b) 4 flip-flops
(c) 3 flip-flops
(d) 2 flip-flops.
(a) 6
(b) 10
(c)12
(d)18.
may be simplified as
(a) AB + CB
(b)AB+C+÷D
(c) A+BC+D
(d) A+B+CD.
17.1 Increasing the precision of the REAL data type requires using at least one additional bit
in
I. * is commutative
(a) I only
(b) II only
(c) I and II
representation of 15 x 256 + 5 x 16 + 3?
(a) 8
(b) 9
(c) 10
(d)11
20. Which of the following combinations of gates does not allow the implementation
(a) TTL
(b) DTL
(c) RTL
24. The Integrated injection Logic has higher density of integration than TT’L because it
(a) does not require transistors with high current gain and hence they have smaller geometry
26.How many bits does one need to encode all twenty-six letters, ten symbols, and ten
numerals?
(a) 5
(b) 6
(c) 7
(d) 46
(a)NAND
(b)XOR
(c)NAD
(a) 1 second
30 . The total number of Boolean functions which can be realized with your variables
Is ?
(a) 4
(b)16
(c) 256
(d) 65,536
Answers :
1b
2a
3c
4d
5c
6b
7d
8d
9c
10b
11d
12a
13d
14c
15b
16c
17a
18c
19a
20d
21a
22a
23c
24b
25c
26b
27d
28a
29c
30b