Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 5

You will need:

4 large craft foam hearts


7 small craft foam hearts
2 tiny craft foam hearts
Pipe cleaner / chenille stem
2 small wiggle eyes
Red pen
Magnet
Glue
 

Instructions:
Stick three of the small hearts in a column overlapping the point of one heart over the top of
the heart below. This is the body.

Stick a small heart into the middle of each large heart.

Arrange the large hearts into the wing shape.


Glue the top ones overlapping the bottom wing part.

Glue the body to the centre of the wings.

Cut two short pieces of chenille stem. Stick these to the back of the top heart of the body,
which is the head.

Stick a tiny heart to the end of each piece of chenille stem.

Stick the wiggle eyes to the head and draw on a mouth.

Finish by gluing a magnet to the back of your butterfly.

This quick and easy foam heart photo frame uses pre-cut bought foam hearts. It is a quick
and easy gift idea for all sorts of occasions, and if you stick a magnet to the back, looks great
on the fridge!
You will need:
Pink, red and white craft foam hearts (you can cut your own but it is easy to pick up bags of
die-cut shapes)
Pink craft foam
Glue
Photo (passport size)
Card
Magnet
Double sided sticky tape
Glue
Instructions:
Cut out a heart shape from the pink foam. Now cut out a smaller heart from the middle. Don't
worry too much about the shape as it will be covered up.

Glue the foam hearts to the heart frame, overlapping them and covering all of the frame.
Leave to dry.

When the glue is dry use double sided sticky tape to stick your photo to the back of the
frame.

Cut a piece of card the same size as the frame and stick it on to the back with double sided
tape.

Finally glue a magnet on to the middle of the card.

You might also like