Professional Documents
Culture Documents
OHSR Analysis Upto 500 KLTUYIYTI
OHSR Analysis Upto 500 KLTUYIYTI
OHSR Analysis Upto 500 KLTUYIYTI
(v) Column & Bracing II to III bracing 4.46 m³ 7700 34303.50 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 4.46 m³ 7700 34303.50 No of columns 6 No.
(vii) Column upto bottom Ring beam 4.46 m³ 7700 34303.50 Clear length of one bracing 2.43 Mtr
(viii Bottom Ring beam 6.39 m³ 8800 56232.00 Width of bracing 0.3 Mtr
(ix) Conical wall 2.31 m³ 8800 20347.88 Depth of bracing 0.45 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 11.09 m³ 8800 97615.32 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 4.94 m³ 8800 43459.54 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 1.89 m³ 8800 16608.34 Diameter of Plinth Protection 8.7 Mtr
(xiii) Top dome 4.92 m³ 8800 43317.85 Width of bottom ring beam 0.5 Mtr
(xiv) Bottom dome 4.14 m³ 8800 36456.25 Depth of bottom ring beam 0.8 Mtr
(xv) Stair case 10.00 m³ 7900 79000.00 Radius of bottom dome 4.884 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 2.825 Mtr
Foundation 1800 kg 68 122400.00 Height of bottom dome 0.9 Mtr
Column and bracing 2160 kg 68 146880.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 4400 kg 68 299200.00 Depth of Conical cylindrical wall 0.4 Mtr
Stair case 1080 kg 68 73440.00 Width of Conical cylindrical wall 0.17 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 3.0925 Mtr
(a) On concrete work inside of containor 133.02 m² 117 15563.69 Radius of cylindrical wall 3.275 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 8.91 m³ 4280 38145.49 Depth of cylindrical wall 3.4 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.15 Mtr
Foundation 4.90 Sq.m 162 793.54 Radius of middle ring beam 3.93 Mtr
Column 135.65 Sq.m 254 34454.59 Smaller depth of middle ring eam 0.15 Mtr
Bracing 52.49 Sq.m 269 14119.27 Larger depth of middle ring eam 0.2 Mtr
Container and ring beam 240.78 Sq.m 269 64769.37 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 133.93 Sq.m 793 106205.33 Radius of top ring beam 3.3375 Mtr
Stair case 41.15 Sq.m 268 11027.66 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 300 Kg 90.5 27150.00 Width of top ring beam 0.2 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 5.45 Mtr
Height of top dome 1.15 Mtr
Thickness of top dome 0.125 Mtr
Top dome 66.964268 m² 55 3683.03 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 9 Mtr 1390 12510.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 10 Mtr 3450 34500.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 24.5232 Mtr 780 19128.10
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 8 Mtr 1500 12000.00
per the specification and the direction of the Engineer.
(v) Column & Bracing II to III bracing 5.32 m³ 7700 40996.65 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 5.32 m³ 7700 40996.65 No of columns 6 No.
(vii) Column upto bottom Ring beam 5.32 m³ 7700 40996.65 Clear length of one bracing 2.6 Mtr
(viii Bottom Ring beam 8.48 m³ 8800 74644.24 Width of bracing 0.3 Mtr
(ix) Conical wall 5.61 m³ 8800 49394.58 Depth of bracing 0.45 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 14.74 m³ 8800 129720.29 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 5.86 m³ 8800 51587.46 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 2.30 m³ 8800 20278.35 Diameter of Plinth Protection 9.7 Mtr
(xiii) Top dome 8.10 m³ 8800 71274.88 Width of bottom ring beam 0.45 Mtr
(xiv) Bottom dome 5.09 m³ 8800 44786.54 Depth of bottom ring beam 0.8 Mtr
(xv) Stair case 15.00 m³ 7900 118500.00 Radius of bottom dome 4.5 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 3 Mtr
Foundation 2610 kg 68 177480.00 Height of bottom dome 1.2 Mtr
Column and bracing 2340 kg 68 159120.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 6600 kg 68 448800.00 Depth of Conical cylindrical wall 0.85 Mtr
Stair case 1620 kg 68 110160.00 Width of Conical cylindrical wall 0.18 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 3.55 Mtr
(a) On concrete work inside of containor 158.48 m² 117 18542.59 Radius of cylindrical wall 4 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 12.74 m³ 4280 54531.32 Depth of cylindrical wall 3.5 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.15 Mtr
Foundation 5.440 Sq.m 162 881.29 Radius of middle ring beam 4.665 Mtr
Column 155.995 Sq.m 254 39622.78 Smaller depth of middle ring eam 0.15 Mtr
Bracing 64.584 Sq.m 269 17373.10 Larger depth of middle ring eam 0.25 Mtr
Container and ring beam 358.706 Sq.m 269 96491.89 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 125.889 Sq.m 793 99829.88 Radius of top ring beam 4.075 Mtr
Stair case 42.242 Sq.m 268 11320.72 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 400 Kg 90.5 36200.00 Width of top ring beam 0.2 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 3.35 Mtr
Height of top dome 1.2 Mtr
Thickness of top dome 0.125 Mtr
Top dome 62.94444 m² 55 3461.94 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 10 Mtr 1390 13900.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 10 Mtr 3450 34500.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 33.47604 Mtr 780 26111.31
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 12 Mtr 1500 18000.00
per the specification and the direction of the Engineer.
(v) Column & Bracing II to III bracing 7.05 m³ 7700 54287.98 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 7.05 m³ 7700 54287.98 No of columns 8 No.
(vii) Column upto bottom Ring beam 7.05 m³ 7700 54287.98 Clear length of one bracing 2.6 Mtr
(viii Bottom Ring beam 10.21 m³ 8800 89849.55 Width of bracing 0.3 Mtr
(ix) Conical wall 7.64 m³ 8800 67235.11 Depth of bracing 0.45 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 16.60 m³ 8800 146048.72 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 6.19 m³ 8800 54462.65 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 2.45 m³ 8800 21522.42 Diameter of Plinth Protection 12.7 Mtr
(xiii) Top dome 8.07 m³ 8800 71015.70 Width of bottom ring beam 0.5 Mtr
(xiv) Bottom dome 6.86 m³ 8800 60378.90 Depth of bottom ring beam 1 Mtr
(xv) Stair case 12.00 m³ 7900 94800.00 Radius of bottom dome 5.2 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 3.25 Mtr
Foundation 4410 kg 68 299880.00 Height of bottom dome 1.2 Mtr
Column and bracing 3510 kg 68 238680.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 7500 kg 68 510000.00 Depth of Conical cylindrical wall 0.9 Mtr
Stair case 1350 kg 68 91800.00 Width of Conical cylindrical wall 0.2 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 3.80 Mtr
(a) On concrete work inside of containor 169.68 m² 117 19852.48 Radius of cylindrical wall 4.25 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 18.99 m³ 4280 81285.32 Depth of cylindrical wall 3.5 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.15 Mtr
Foundation 5.935 Sq.m 162 961.41 Radius of middle ring beam 4.925 Mtr
Column 233.993 Sq.m 254 59434.17 Smaller depth of middle ring eam 0.15 Mtr
Bracing 86.112 Sq.m 269 23164.13 Larger depth of middle ring eam 0.25 Mtr
Container and ring beam 393.960 Sq.m 269 105975.27 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 136.439 Sq.m 793 108196.35 Radius of top ring beam 4.325 Mtr
Stair case 42.242 Sq.m 268 11320.72 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 425 Kg 90.5 38462.50 Width of top ring beam 0.2 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 3.35 Mtr
Height of top dome 1.2 Mtr
Thickness of top dome 0.125 Mtr
Top dome 68.22 m² 55 3752.08 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 12 Mtr 1390 16680.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 15 Mtr 3450 51750.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 46.098 Mtr 780 35956.44
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 12 Mtr 1500 18000.00
per the specification and the direction of the Engineer.
(v) Column & Bracing II to III bracing 7.10 m³ 7700 54662.20 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 7.10 m³ 7700 54662.20 No of columns 8 No.
(vii) Column upto bottom Ring beam 7.10 m³ 7700 54662.20 Clear length of one bracing 2.65 Mtr
(viii Bottom Ring beam 11.00 m³ 8800 96761.05 Width of bracing 0.3 Mtr
(ix) Conical wall 10.22 m³ 8800 89936.36 Depth of bracing 0.45 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 20.07 m³ 8800 176652.72 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 8.31 m³ 8800 73123.71 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 2.65 m³ 8800 23289.00 Diameter of Plinth Protection 14.7 Mtr
(xiii) Top dome 8.67 m³ 8800 76303.00 Width of bottom ring beam 0.5 Mtr
(xiv) Bottom dome 7.06 m³ 8800 62120.60 Depth of bottom ring beam 1 Mtr
(xv) Stair case 14.00 m³ 7900 110600.00 Radius of bottom dome 5.35 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 3.5 Mtr
Foundation 5940 kg 68 403920.00 Height of bottom dome 1.4 Mtr
Column and bracing 3510 kg 68 238680.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 9100 kg 68 618800.00 Depth of Conical cylindrical wall 1 Mtr
Stair case 1530 kg 68 104040.00 Width of Conical cylindrical wall 0.185 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 4.11 Mtr
(a) On concrete work inside of containor 247.92 m² 117 29006.12 Radius of cylindrical wall 4.605 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 25.44 m³ 4280 108902.88 Depth of cylindrical wall 3.5 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.15 Mtr
Foundation 10.409 Sq.m 162 1686.27 Radius of middle ring beam 5.29 Mtr
Column 213.646 Sq.m 254 54265.98 Smaller depth of middle ring eam 0.15 Mtr
Bracing 80.136 Sq.m 269 21556.58 Larger depth of middle ring eam 0.25 Mtr
Container and ring beam 394.189 Sq.m 269 106036.93 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 239.670 Sq.m 793 190058.25 Radius of top ring beam 4.68 Mtr
Stair case 41.513 Sq.m 268 11125.35 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 450 Kg 90.5 40725.00 Width of top ring beam 0.3 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 6.9 Mtr
Height of top dome 1.6 Mtr
Thickness of top dome 0.125 Mtr
Top dome 119.83 m² 55 6590.92 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 15 Mtr 1390 20850.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 15 Mtr 3450 51750.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 49.51 Mtr 780 38621.23
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 12 Mtr 1500 18000.00
per the specification and the direction of the Engineer.
(v) Column & Bracing II to III bracing 7.05 m³ 7700 54287.98 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 7.05 m³ 7700 54287.98 No of columns 8 No.
(vii) Column upto bottom Ring beam 7.05 m³ 7700 54287.98 Clear length of one bracing 2.6 Mtr
(viii Bottom Ring beam 13.76 m³ 8800 121089.55 Width of bracing 0.3 Mtr
(ix) Conical wall 12.60 m³ 8800 110921.00 Depth of bracing 0.45 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 21.56 m³ 8800 189756.42 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 7.90 m³ 8800 69512.45 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 2.81 m³ 8800 24757.01 Diameter of Plinth Protection 15.7 Mtr
(xiii) Top dome 11.19 m³ 8800 98488.93 Width of bottom ring beam 0.6 Mtr
(xiv) Bottom dome 8.00 m³ 8800 70442.05 Depth of bottom ring beam 1 Mtr
(xv) Stair case 15.00 m³ 7900 118500.00 Radius of bottom dome 5.2 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 3.65 Mtr
Foundation 7020 kg 68 477360.00 Height of bottom dome 1.4 Mtr
Column and bracing 3510 kg 68 238680.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 10300 kg 68 700400.00 Depth of Conical cylindrical wall 1.2 Mtr
Stair case 1620 kg 68 110160.00 Width of Conical cylindrical wall 0.25 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 4.34 Mtr
(a) On concrete work inside of containor 303.64 m² 117 35525.65 Radius of cylindrical wall 4.9 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 29.02 m³ 4280 124223.57 Depth of cylindrical wall 3.4 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.1875 Mtr
Foundation 11.021 Sq.m 162 1785.47 Radius of middle ring beam 5.5875 Mtr
Column 223.819 Sq.m 254 56850.08 Smaller depth of middle ring eam 0.15 Mtr
Bracing 82.368 Sq.m 269 22156.99 Larger depth of middle ring eam 0.2 Mtr
Container and ring beam 442.613 Sq.m 269 119062.85 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 288.315 Sq.m 793 228633.64 Radius of top ring beam 4.975 Mtr
Stair case 41.877 Sq.m 268 11223.04 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 450 Kg 90.5 40725.00 Width of top ring beam 0.3 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 7.5 Mtr
Height of top dome 1.9 Mtr
Thickness of top dome 0.125 Mtr
Top dome 144.1574 m² 55 7928.66 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 15 Mtr 1390 20850.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 15 Mtr 3450 51750.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 45.3258 Mtr 780 35354.12
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 12 Mtr 1500 18000.00
per the specification and the direction of the Engineer.
(v) Column & Bracing II to III bracing 8.68 m³ 7700 66865.11 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 8.68 m³ 7700 66865.11 No of columns 8 No.
(vii) Column upto bottom Ring beam 8.68 m³ 7700 66865.11 Clear length of one bracing 2.87 Mtr
(viii Bottom Ring beam 18.32 m³ 8800 161231.56 Width of bracing 0.3 Mtr
(ix) Conical wall 16.60 m³ 8800 146116.93 Depth of bracing 0.45 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 24.41 m³ 8800 214809.54 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 8.77 m³ 8800 77132.38 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 3.15 m³ 8800 27742.78 Diameter of Plinth Protection 15.7 Mtr
(xiii) Top dome 13.70 m³ 8800 120576.71 Width of bottom ring beam 0.6 Mtr
(xiv) Bottom dome 9.39 m³ 8800 82633.94 Depth of bottom ring beam 1.1 Mtr
(xv) Stair case 17.00 m³ 7900 134300.00 Radius of bottom dome 6.1 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 4.05 Mtr
Foundation 9900 kg 68 673200.00 Height of bottom dome 1.4 Mtr
Column and bracing 4140 kg 68 281520.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 12400 kg 68 843200.00 Depth of Conical cylindrical wall 1.4 Mtr
Stair case 1800 kg 68 122400.00 Width of Conical cylindrical wall 0.26 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 4.84 Mtr
(a) On concrete work inside of containor 359.94 m² 117 42112.55 Radius of cylindrical wall 5.5 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 43.54 m³ 4280 186335.35 Depth of cylindrical wall 3.4 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.25 Mtr
Foundation 21.958 Sq.m 162 3557.20 Radius of middle ring beam 6.2 Mtr
Column 259.992 Sq.m 254 66037.97 Smaller depth of middle ring eam 0.15 Mtr
Bracing 95.054 Sq.m 269 25569.63 Larger depth of middle ring eam 0.2 Mtr
Container and ring beam 537.078 Sq.m 269 144474.11 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 359.250 Sq.m 793 284884.88 Radius of top ring beam 5.575 Mtr
Stair case 42.242 Sq.m 268 11320.72 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 500 Kg 90.5 45250.00 Width of top ring beam 0.3 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 9.182 Mtr
Height of top dome 1.9 Mtr
Thickness of top dome 0.125 Mtr
Top dome 179.62 m² 55 9879.36 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 18 Mtr 1390 25020.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 18 Mtr 3450 62100.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 58.03 Mtr 780 45264.96
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 12 Mtr 1500 18000.00
per the specification and the direction of the Engineer.
(v) Column & Bracing II to III bracing 10.76 m³ 7700 82853.74 Height of column b/w adj. bracing 4.19 Mtr
(vi) Column & Bracing III to IV bracing 10.76 m³ 7700 82853.74 No of columns 10 No.
(vii) Column upto bottom Ring beam 10.76 m³ 7700 82853.74 Clear length of one bracing 2.8 Mtr
(viii Bottom Ring beam 19.79 m³ 8800 174169.90 Width of bracing 0.3 Mtr
(ix) Conical wall 26.57 m³ 8800 233857.04 Depth of bracing 0.5 Mtr
Height of column from 4th bracing
(x) Cylindricial wall 31.68 m³ 8800 278772.92 to bottom ring beam 3.9 Mtr
(xi) Middle ring beam 10.56 m³ 8800 92959.73 Depth of protection plinth 0.15 Mtr
(xii) Top ring beam 3.45 m³ 8800 30355.32 Diameter of Plinth Protection 17.7 Mtr
(xiii) Top dome 17.22 m³ 8800 151569.28 Width of bottom ring beam 0.6 Mtr
(xiv) Bottom dome 12.54 m³ 8800 110385.01 Depth of bottom ring beam 1.2 Mtr
(xv) Stair case 18.00 m³ 7900 142200.00 Radius of bottom dome 7.13 Mtr
[4]
Supplying, Cutting, bending, binding and placing in
position as per plan and design and as per IS 2503 incl.
cost of steel and binding wire for reservoirs only incl. lift
upto 6 mt. height using TMT bars confirning to relevent
IS - Radius of bottom ring beam 4.375 Mtr
Foundation 9990 kg 68 679320.00 Height of bottom dome 1.6 Mtr
Column and bracing 5040 kg 68 342720.00 Thickness of bottom dome 0.15 Mtr
Top ring beam, conical wall, Container, top and bottom
ring beam. 16500 kg 68 1122000.00 Depth of Conical cylindrical wall 1.75 Mtr
Stair case 1980 kg 68 134640.00 Width of Conical cylindrical wall 0.3 Mtr
[5] Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete.
- Radius of Conical cylindrical Wall 5.27 Mtr
(a) On concrete work inside of containor 436.56 m² 117 51077.07 Radius of cylindrical wall 6 Mtr
[6] Providing & casting in situ CC (1:2:4) for plinth
protection around the ESR including the work of making
sub base & base of approved materials 36.89 m³ 4280 157888.76 Depth of cylindrical wall 3.4 Mtr
[7]
Centering & shuttering with plywood or steel sheets
including strutting, propping bracing both ways &
removal of form work for foundation in basement rafts up
to plinth level. Width of cylindrical wall 0.225 Mtr
Foundation 23.961 Sq.m 162 3881.67 Radius of middle ring beam 6.725 Mtr
Column 395.640 Sq.m 254 100492.56 Smaller depth of middle ring eam 0.15 Mtr
Bracing 156.800 Sq.m 269 42179.20 Larger depth of middle ring eam 0.2 Mtr
Container and ring beam 751.765 Sq.m 269 202224.91 Width of of middle ring eam 0.9 Mtr
Top dome & bottom dome 528.902 Sq.m 793 419418.97 Radius of top ring beam 6.1 Mtr
Stair case 44.064 Sq.m 268 11809.15 Depth of top ring beam 0.3 Mtr
[8]
Supply & fixing in cement mortar welded hand railing
made out of MS round or square bars, flats etc. for
staircase as per design in all respect with priming coat of
red oxide. 475 Kg 90.5 42987.50 Width of top ring beam 0.3 Mtr
[9]
Providing & applying Anti carbonation paint of approved
manufacture & of approved color in 2 coats to the external
surfaces of container including scaffolding if necessary
and preparing the surface, curing etc., complete. - - Radius of top dome 10.2 Mtr
Height of top dome 2.15 Mtr
Thickness of top dome 0.125 Mtr
Top dome 264.45 m² 55 14544.79 Length of Flight 2.47 Mtr
Thickness of flight slab 0.175 Mtr
Providing, fabricating and erecting MS ladder of 450mm
wide made of 65 x 65 x 6mm angle iron and 20mm MS
bars for walkway to top of the OHSR including cutting,
hoistng, fixing in position and applying a priming coat of 20 Mtr 1390 27800.00
approved steel primer complete in all respect as per
specifications and the direction of the Engineer.
Width of flight 0.9 Mtr
Providing, fabricating and erecting MS ladder (with MS
cage)of 450mm wide made of 65 x 65 x 6mm angle iron,
20mm MS bars for walk way to top of the OHSR and for
cage flat 3 Nos-75 x 8 as vertical member and flat 40 x 5
as horizontal member 300 c/c including cutting, hoistng, 20 Mtr 3450 69000.00
fixing in position and applying a priming coat of approved
steel primer all complete as per specification and the
direction of the Engineer.
Number of steps in one flight 9 No.
Providing, fabricating and erecting hand railing for
walkway, top dome slab, balconey,staircase and landing
consist of two rows ( one at top and other at middle level)
of 20 mm GI pipe class-B and 900 mm high vertical angle
65X65X6 mm at spacing 1.50 m c/c including welding,
threading, applying a priming coat of approved steel 99.87 Mtr 780 77901.97
primer and embedding in cement concrete floor complete
in all respect as per specification and the direction of the
Engineer.
Tread of step 0.19 Mtr
Supply, fabricating & fixing of anodised (20 to 25 micron)
Aluminum ladder of 450mm wide with 2 nos rectangular
section of 65 x 35 mm (3 mm thick) as vertical post and
25 mm bars steps at 300 mm c/c complete in all respect as 15 Mtr 1500 22500.00
per the specification and the direction of the Engineer.