A Name That Means Protection With Great Comfort: Tecasafe®Plus 700

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

A NAME THAT

MEANS
PROTECTION WITH
GREAT COMFORT

Tecasafe®Plus 700

A DECADE OF PROVEN
PROTECTION AND COMFORT
For more than 10 years, Tecasafe® Plus has been
tested in the market. It delivers excellent FR
protection from an inherent blend and stands up
to tough conditions.

ALL THE ADVANTAGES OF


COOLDERM™ TECHNOLOGY
Active moisture wicking ensures quicker drying
time to keep sweat away from the skin. Stay
cooler and drier on the job.

INHERENT FR PROTECTION
NEVER WASHES OUT OR
WEARS AWAY
The FR protection is built right into the fabric
through intimate fiber blending. The FR
properties cannot be removed from the fabric.
TECHNICAL DATA* TENCATE TECASAFE® PLUS 700
Nominal Weight 7.4 osy (237 gsm)
Construction Twill
Colors Hi-Vis Yellow, Yellow, Red, Light Blue, Royal Blue, Gray, Khaki
Made in America Yes
Fiber Content Modacryllic, Lyocell, Aramid
Certification(s) NFPA 2112, NFPA 1977, NFPA 1975, ASTM 1506

Thermal Testing (Flame Resistance)

Arc Thermal Performance Value ATPV Rating 9.0 cal/cm²


NFPA 70E, ASTM 1959
PPE Category Category 2

Vertical Flame Initial and 100x After flame < 2.0 sec
ASTM 6413, NFPA 2112 after wash Char length < 4.0 in (100mm)
Thermal Shrinkage Initial and 3x after wash < 10 %
NFPA 2112

Contact 7.7 cal/cm²


Initial
HTP Spaced 10.3 cal/cm²
NFPA 2112
Contact 8.8 cal/cm²
3x after wash
Spaced 11.3 cal/cm²

Physical Testing
Tensile Strength 160 x 105 lbf (710 x 465 N)
ASTM D5034, warp x fill

Elmendorf Tear 13.0 x 10.0 lbf (58 x 45 N)


ASTM D1424, warp x fill

Dimensional Stability < 3.0 %


AATCC 135

Comfort
Air Permeability 53 ft³/ft²/min
ASTM D737

Appearance Score 5 (Best) to 1 (Worst)


Color Fastness
Laundering (AATCC 61 2A)
Shade Change Up to 5 *

Pilling Resistance Initial: 60 min Up to 5 *


ASTM D3512

* All values subject to final certification and specification. Tested on specific colors. Appearance is dependent on shade of fabric.

AVAILABLE COLORS OPTIONAL COLORS


TenCate Protective Fabrics, the world’s textile dyeing expert,
Hi-Vis can produce almost every color with a minimum quantity
Yellow Yellow Red Light Blue Royal Blue Gray Khaki of 3000 yards. Smaller quantities can be ordered, subject to
a surcharge. For more information, please contact TenCate
Protective Fabrics.

All mentioned data must be considered as indicative values. To the best of our knowledge all information contained herein is accurate. TenCate Protective Fabrics declines any form of liability
related to the use of the attached specimen that shall be regarded as a sample only and therefore not meant to be used in any form of garment making.

Q2-2020

You might also like