Professional Documents
Culture Documents
Super Tauro: Description
Super Tauro: Description
Super Tauro: Description
LUBRICANTS
INDUSTRY
Description
These oils are designed for the lubrication of industrial gear assemblies of all types including
those which are heavily charged and which work in severe conditions. They are obtained by
adding additives to selected base stocks, with high viscosity indices, to improve properties
such as resistance to oxidation, foam formation, antirust; sulphur-phosphorous additives are
included, which endows them with excellent extreme pressure (EP) properties.
Recommended uses
They are specially suitable for all types of industrial reducers or multipliers lubricated by
dripping or circulation.
They are very suitable for all cases where maximum levels of resistance to oxidation and/
or loading capacity are required.
Properties
● They reduce wear in severe lubrication conditions.
● Excellent oxidation stability.
● Very good antirust protection.
● Great water separation capacity.
● Not corrosive for steel or its alloys.
● Good anti-foam characteristics.
● Resistance to breaking lubricating film.
Quality level
● DIN-51517 Part 3 CLP ● US Steel 224
● ISO 6743/6 - CKD ● AGMA 9005-E02-EP
● Cincinnati Lamb P-35, P-59, P-63, P-76, P-77, P74 and P-78
● David Brown S1.53.101
Technical characteristics
UNIT METHOD VALUEVALUEVALUEVALUE VALUE VALUE VALUEVALUE
ISO Grade 68 100 150 220 320 460 680 1000
Viscosity at 100 cSt ASTM D 445 8.5 11 14.5 19 23 30 40 50
Viscosity at 40 cSt ASTM D 445 68 100 150 220 320 460 680 1000
Viscosity rate ASTM D 2270 98 97 97 95 93 92 95 95
Density at 15ºC g/cm3 ASTM D 4052 0.883 0.889 0.894 0.899 0.904 0.908 0.909 0.909
Flash point ºC ASTM D 92 230 245 260 260 260 260 260 260
Pour point ºC ASTM D 97 -12 -12 -9 -9 -9 -9 -9 -6
Disemulsion
- Free water cm3 ASTM D 2711 80 min. 80 min. 80 min. 80 min. 80 min. 80 min. 80 min. 80 min.
- Emulsion cm3 1 max. 1 max. 1 max. 1 max. 1 max. 1 max. 1 max. 1 max.
Corrosiveness to
ASTM D 130 1b 1b 1b 1b 1b 1b 1b 1b
copper 3h at 100ºC
Resistance to rust, A
and B.
ASTM D 665 Pass Pass Pass Pass Pass Pass Pass Pass
TAN (mg KOH/g) ASTM D 664 0.45 0.45 0.45 0.45 0.45 0.45 0.6 0.6
Disemulsion min ASTM D 1401 < 30 < 30 < 30 < 30 < 30 < 30 < 60 < 60
FZG, Step 12 DIN 51354 Pass Pass Pass Pass Pass Pass Pass Pass
Available in
Bulk: ISO 150 and 220. 875 kg container: ISO 150, 220 and 320. 185 kg drum: all
grades. 18 kg drum: ISO 220 and 460.
LUBRICANTS
Hazard identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use
of gloves, visors or glasses is recommended to avoid splashes.
Fire-fighting measures
No special measures required.
Fire-extinguishing measures: Foams, dry chemicals, CO2, water spray. Do not apply
the jet of water directly as this could cause the product to disperse.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and
oily consistency that may harm flora and fauna on contact. Avoid material getting into
water outlets.
Decontamination and cleaning: Treat like an accidental oil spill. Prevent dispersion
using mechanical barriers and remove by physical or chemical means.
repsol.com