Professional Documents
Culture Documents
User Manual: Smart Alarm System & App
User Manual: Smart Alarm System & App
com
m
Smart Alarm System & App
Designed for home and business security. World famous expert of smart alarm system
Easy to setup and use with App. Perfectly match all Android® and iOS smart phones.
all
All manuals and user guides at all-guides.com
MENU
The screenshots and texts might be different from the version you’re using. Please refer to the latest one.
● FAQ P23
2
All manuals and user guides at all-guides.com
During the installation of the alarm system, you might trigger the alarm by
accident. If the remote controller has been paired with the system, you can DISARM
press the DISARM button on right top (with the unlock icon) to disarm the
system and cancel the alarm.
• The main panel uses GSM based SIM cards to send text messages and make phone calls.
It might be incompatible with some WCDMA or LTE sim card.
• Make sure PIN-codes and voicemail are de-activated on the SIM before using with the panel.
• Make a note of the SIM telephone number, you will need it for setup.
4
All manuals and user guides at all-guides.com
m
Get Ready and Power On 3/3 Standard SIM Card
Micro SIM Card
Nano SIM Card
.co
Mini-SIM Nano-SIM Micro-SIM
• Please use the Mini-SIM card (Standard-SIM card) for the alarm system.
Card adapter is required when using nano or micro SIM card.
es
uid
1. Open the back cover 2. Slide the cover of the SIM slot to the left to 3. Insert the SIM card and align it (notch on right
open it. top), slide the cover to the right to close it.
-g
all
4. Insert the power cable (USB cable), 5. Turn on the power switch by move the button 6. Put the cover back and close it.
make sure the narrow edge is facing down. to the right. 5
All manuals and user guides at all-guides.com
Child Lock
Lock: Long-press for 6 seconds until the lock icon shows on screen.
The system supports Exit Delay feature. It means the system would wait few seconds before going into ARM status.
It allows you to leave your home without triggering the alarm. The delay time can be adjusted in App.
6 • You can easily recharge it via any MicroUSB cable. Please make sure the recharger is 5V/2A as our official one.
All manuals and user guides at all-guides.com
08:18 18°c
AC Power
External power is available.
Arm
All active sensors can trigger alarm.
Wednesday, September 15
Disarm
Stop trigger alarm, except those on 24-hours mode.
Home Arm
Only those on Home mode stop trigger alarm.
Clock Real-time Temperature
After initializing process, the time will The temperature surrounding main panel.
synchronize with your phone’s. Users can change ºC or ºF in settings. Arming Schedule
Indicate the Arm Schedule has been set.
8
All manuals and user guides at all-guides.com
9
All manuals and user guides at all-guides.com
m
Initializing by App
.co
es
uid
-g
• Scan the QRCode or visit the website from your phone to download the
latest App for both Android and iOS phones.
Smart Alarm System
• All operations and settings of the system could be easily done via App.
• App comes with multi-languages, you can easily change it in App.
Power to the people
all
10
All manuals and user guides at all-guides.com
S AV E
• The beginners will get kindly reminder, which could help them through the settings step by step.
• The App supports renaming for the main panel, which is especially useful when managing multiple devices.
• Users without having a main panel may experience the products in the demo mode of App.
• Some carriers might ask you to remove the 0 at the start of the mobile number when country code is selected.
11
• The password would be saved to encrypt all outgoing SMS commands. You can change it in the device management menu.
All manuals and user guides at all-guides.com
12
All manuals and user guides at all-guides.com
Enable it to receive
reports for each SMS
command.
Navigator
Swap to switch between menus.
The other two menus are [Information]
and [Settings]
Easy Control Panel
Arm, Disarm, Home Arm, SOS, Etc.
Accessories QuickView
The fastest way to use your accessories.
How to Add Emergency Contacts Strongly recommend to set it when using main panel the first time.
m
Operations During the Emergency Call
Appendix: operation instructions when receiving emergency calls
.co MONITOR
Press ** to monitor and talk via
phone to main panel.
es
Press ## to cancel SOS.
CANCEL SOS
uid
LISTEN AGAIN
• Like adding accessories, tap + to scan QR code on camera then name it.
• If you want to be informed to check the real-time video (like the camera facing the door) when alarm is trigger by certain accessory
(like the door/window sensor installed on the front door), you can use [inform when … alarms:] and tick the related accessories.
17
All manuals and user guides at all-guides.com
No Yes
1. If a thief intrudes and triggers some 2. The App captures the informing SMS right 3. Just one tap to show you the real-time
accessory alarm, the emergency contacts after that and reminds the user to check live video! The thief is nowhere to hide!
would get informing SMS and alarming call video from the camera paired before. Users
right after that. get informed immediately even when the App
is exited.
19
All manuals and user guides at all-guides.com
m
Advanced Settings and Other Features 1/3
Emergency Contact:
.co
Up to 6 contacts for setting.
20
All manuals and user guides at all-guides.com
Exit Delay:
Waiting time before going into ARM status. It can be 90 seconds longest.
Entry Delay:
If some sensors in delay mode trigger alarm, system will wait few seconds before
activating alarm. It can be 90 seconds longest.
Speaker Volume: The build-in speaker volume, with 4 grades and 1 is weakest.
Change Password: Admin and user password settings, for authorization while initializing.
Sync Host Time: Synchronize the time of main panel with the phone’s time.
21
All manuals and user guides at all-guides.com
System Status:
Check current time, arm status, etc.
Arming Time:
Smart Camera List & Linking Status Check delay settings for Entry Delay and Exit Delay.
Smart Switch List
Informing Strategies:
Check types of informing SMS received from
main panel when event occurs.
(Like power down, temperature alarm, etc.)
FAQ
Can I use other branded accessories with the main panel?
Sorry, main panel only supports official accessories.
1. The official accessories use encrypted communication protocols with patented technology. This makes them safer and more stable.
2. The official accessories are easily paired with the system just by scanning QR codes or barcodes.
Most of our accessories support low-battery warning.
6.5-7.5 feet
24
All manuals and user guides at all-guides.com
m
Appendix 2: Smart Camera Settings 1/3
Pairing with Main Panel
.co
• Please use App to scan the QR code to pairing Smart Camera.
• The QR code is printed on the bottom of Smart Camera.
Insert LAN Cable and Power On Audio Out LAN SD Card Reset Power
• Please always connect Smart Camera with LAN be-
es
fore powering up when you first using it. Bottom Back view of P-series
• Make sure the the settings like DHCP Server and (Interface differs for each series)
UPNP are enabled on your router.
• Connect the power cable, the Smart Camera will run
some diagnostic processes like rolling the camera.
uid
25
All manuals and user guides at all-guides.com
SYNC with phone’s timezone: SYNC with phone’s timezone. Synchronize the timezone with your phone’s.
28
All manuals and user guides at all-guides.com
DHW01O
Wireless Motion Sensor
The wireless motion sensor is an accessory of smart alarm system, mainly for indoor use. With high performance infrared
sensor, works under digital dual-core fuzzy logic operative programming and intelligent analysis, it accurately detects human
body movement and effectively avoids false alarms. Featured with automatic temperature compensation technology, it en-
sures high intelligence, sensitivity, and stability.
It’s fashion design, energy saving, low battery warning supported and with long transmission distance. The main panel will
send a SMS to user for battery changing when needed. With 360º angle adjustment supported, it’s easy to setup and never
get stuck.
• Working Voltage DC 3V
• Battery 2 × AA battery(1.5V)
• Working Current ≤20mA
• Standby Current ≤20μA
• Detective Range 110°
• Detective Distance 9m
• Transmission Distance Without obstacle 200m
• Transmission Frequency 433.92MHz
• Working Temperature -20℃~50℃
• Humidity ≤90%rh (non-condensing)
• Weight 66g (battery not included) 112g (battery included) 62.3g (Bracket)
• Dimension 99.6mm*54.0mm*40.2mm L*W*H(±0.1mm)
29
All manuals and user guides at all-guides.com
m
Appearance PCB Layout
.co
Magnetic Slice
Infrared Sensor
Detection Window
es
Stainless-steel Bead
Detective Interval
Time Setting
Switch
(every 5s. or
uid
5min.)
Operating Instructions
-g
1. Working principle
with digital dual-core fuzzy logic operative programming and intelligent analysis, it accurately detects human body movement with infrared sensor and
sends signal to main panel.
all
10°-20°
1.8-2.2m
1.2m 6m 12m 31
All manuals and user guides at all-guides.com
32
All manuals and user guides at all-guides.com
DMC01O
Wireless Contact Sensor
The wireless contact sensor is an accessory of smart alarm system.
It's fashion design, energy saving, and low battery warning supported. The main panel will send a SMS to user for battery
replacement when needed.
It's easy to setup and works well with most doors and windows. When transmitter and magnet are apart, the sensor triggers
alarm.
Two great features:
- Transmitter can be put on either of magnet's left or right side.
• Working Voltage DC 3V
• Battery 1 × CR2032 button battery (3V)
• Working Current 20mA
• Standby Current 2μA
• Transmission Distance Without obstacle 200m
• Transmission Frequency 433.92MHz
• Working Temperature -10℃~40℃
• Humidity ≤90%rh (non-condensing)
• Weight 35.5g(battery not included) 40g(battery included)
Transmitter: 80.0mm*38.2mm*13.3mm
• Dimension
Magnet: 80.0mm*14.8*12.9mm (L*W*H)
33
All manuals and user guides at all-guides.com
Transmitter
Magnet
LED Indication
LED flashes once: Door/window is opened and
transmitter sends signal to the main panel.
LED lights stays on: Low batter y, please
replace the battery immediately.
LED Indicator
Operating Instructions
1. Working principle
The transmitter sends trigger signal to main panel paired when the magnet mounted near is moved apart.
2. Pairing with main panel by App
①Scan the QR code printed on the sensor.
②The pairing result would be confirmed by SMS sent from main panel.
34
All manuals and user guides at all-guides.com
m
Installation & Notice
.co
• Pairing to main panel by App before installing.
• Attach the transmitter and magnet seperately on door/window and its frame with double-side sticky tape or fix with screws. Transmitter can be put on
either of magnet's left or right side.
• Make sure the distance between transmitter and magnet is less than 1cm and at the same level.
• Avoid installing the sensors in area with a large amount of metal or electric wire.
es
uid
35
All manuals and user guides at all-guides.com
①Insert the flat blade of a small screwdriver ②Replace with 1xCR2032 battery.
into the pry-off slot of transmitter, twist the
blade to remove the cover.
36
All manuals and user guides at all-guides.com
DYK01O
Remote Controller
The remote controller is an accessory of series smart alarm system. It helps you quickly arm/disarm/home arm/trigger SOS the system.
It’s small and exquisite, convenient for carrying out on keychain or in pocket/bag.
• Working Voltage DC 3V
• Battery 1 × CR2032 button battery (3V)
• Working Current ≤7.5mA
• Standby Current No power consumption
• Transmission Distance Without obstacle 200m
• Transmission Frequency 433.92MHz
• Working Temperature -20℃~50℃
• Humidity ≤90%rh (non-condensing)
• Weight 16.4g (battery included)
• Dimension 58.0mm*33.1mm*11.0mm L*W*H(±0.1mm)
37
All manuals and user guides at all-guides.com
Arm Disarm
1 × CR2032
Cover for Battery Button Battery
Keychain
Operating Instructions
①Scan the QR code printed on the controller.
②The pairing result would be confirmed by SMS sent from main panel.
38
All manuals and user guides at all-guides.com
Operating Clarification
• Arm
Press , the LED indicator lights on, the system enters armed status.
• Home Arm
Press , the LED indicator lights on, the system enters home armed status.
• Disarm
Press , the LED indicator lights on, the system enters disarmed status.
• SOS
Press , the LED indicator lights on, the system immediately enters emergent alarming status to call/text emergency contacts.
①Using a coin, turn the battery cover ②Remove the used battery and replace with
slightly counterclockwise. 1× CR2032 battery with the plus (+) symbol facing up.
39
All manuals and user guides at all-guides.com
m
.co
es
uid
-g
all