Professional Documents
Culture Documents
DCT 5038 - Data Communications & Networking Topic 3
DCT 5038 - Data Communications & Networking Topic 3
Topic 3
2. The figure below shows the differential Manchester encoding of a data stream.
Determine the data stream.
3. The figure below shows the NRZ-L encoding of data stream. Determine the data
stream.
5. Draw a digital signal of a data stream 10011011 with the encoding below:
i. NRZ-L
ii. AMI
6. Draw a digital signal of a data stream 10110010 with the encoding below:
i. NRZ-I
ii. Differential Manchester
7. The most common technique to change digital data to analog signal is Pulse Code
Modulation (PCM). Explain with diagram the PCM processes.
8. Using the Nyquist theorem, calculate the minimum sampling rate for an analog signal
with frequencies from 2500 to 8200 Hz and find its bit rate, assuming 4 bits per sample.
9. If the interval between two samples in a digitized signal is 125s, what is the sampling
rate? Given that 8 bits per sample, calculate the bit rate and write your answer in kbps.
-1-
This study source was downloaded by 100000830574679 from CourseHero.com on 01-02-2022 20:21:43 GMT -06:00
https://www.coursehero.com/file/53095140/286175-Topic-3-2pdf/
Powered by TCPDF (www.tcpdf.org)