Professional Documents
Culture Documents
Unidrum Lever: Push-Pull and Pull-Only Hand Control
Unidrum Lever: Push-Pull and Pull-Only Hand Control
Description:
Unidrum Lever
Industrial Push-Pull
and Pull-Only Hand Control
Features:
• Adjustable friction lock
• 5 to 1 mechanical advantage
• Adjustable mechanical stops
Hand Control A control head designed primarily for hand throttle applications
on commercial and industrial vehicles, and also suitable for many
Industrial other uses. Compact and efficient for imparting light-to-medium
pull-only or push-pull loads through flexible conduits and inner-
members. Unidrum controls hold and operate up to 26lb push-pull
or pull-only output loads. Mechanical advantage at knob is 5
to 1. There is a self locking nut for operator adjustment of friction
setting. The adjustable stop plates allow 10° (3/16" linear output)
incremental travel adjustment. Two inches of cable travel requires
approximately 90° lever travel. Three inches of cable requires
approximately 135° lever travel. The lever position is adjustable
in 60° increments to provide optimum operating range. Optional
cable entry offers four mountings/directions of operation
alternatives. Also available with a smaller handle for light duty
applications or with a locking handle.
CH205/206 CH240
2.00 2.00
(APPROX.) (APPROX.)
1.812 1.281
.531
3/16 DIA HOLES 1.75 3.50 P.C.
1.125 (4 PLACES) 3.50 3.50 .375
FOUR CONTERSUNK
5.90 MOUNTING HOLES
3/16” CLEAR
2.20 2-3/8” P.C. DIA
5-3/8
30°
1.14
3.66
1.34 1.57
2.20
FRICTION SCREW & 1-3/64
MOUNTING FLANGE
1.59 RETAINING SCREW
.90 CABLE ENTRY, LEFT
2.56 OR RIGHT-HAND SIDE
CABLE
ENTRY 3.15
UL UR
LL LR
LD Utility
3 Threaded Swivel A
EXTENDED
Dimension A .75 .75 .91 MIN
FULL THD
Per Stroke
(extended)
2ⴖ 7.18ⴖ .53 DIA 1/4-28UNF-2A
.65 DIA 5/8-18UNF-2A
3ⴖ 9.18ⴖ
4 Grooved Swivel 1.75 A
.44 EXTENDED .91 MIN
Dimension A FULL THD
Per Stroke
(extended)
.53 DIA 1/4-28UNF-2A
2ⴖ 6.56ⴖ .65 DIA .17 RADIUS
.50 DIA .41 ROOT DIA
3ⴖ 8.56ⴖ
VLD Bristow®
L L
1.92 1.41 12.00
12.00
1.00 .12
Replacement Cables
Part Number Duty Cap Travel
A17X-330 LD T 2"
A17X-331 LD T 3"
A17X-332 LD G 2"
A17X-333 LD G 3"
A17X-530 VLD T 2"
A17X-531 VLD T 3"
A17X-532 VLD G 2"
A17X-533 VLD G 3"
WARNING!
Since the manufacturer is unable to determine all applications in which a part may
be placed, it is the user’s responsibility to determine the suitability of the part for its
intended use. This is especially true where safety is a factor. Incorrect application or
installation may result in property damage, bodily injury, or death. For technical
assistance, call 260-749-5105.