Professional Documents
Culture Documents
Welding Procedure Specification (WPS) (ASME SEC-IX QW-482) : Company Techno Weighsystems Pvt. LTD
Welding Procedure Specification (WPS) (ASME SEC-IX QW-482) : Company Techno Weighsystems Pvt. LTD
Welding Procedure Specification (WPS) (ASME SEC-IX QW-482) : Company Techno Weighsystems Pvt. LTD
Squre Groove
Socket
Backing(Yes/No): YES
Backing Material:
Metal √
Nonfusing Metal
Nonmetallic
Other
BASE METAL(QW-403):
P.No. 1 Group No. 1 To P.No. 1 Group No. 1
OR
Specification,type, and grade IS-2062 E250 BR
OR
Chemical Analysis,and Mechanical properties :
to Chemical Analysis,and Mechanical properties :
Thickness Range:
Base Metal: Groove- 1.5 mm - 24 mm Fillet - All
Pipe Dia. Range: Groove- All Fillet - All
Others: NIL
FILLER METALS(QW-404):
Parameter Root & Hot Pass Filler & final pass
Spec. No.(SFA) 5.18 5.18
AWS No.(Class) ER70S6 ER70S6
F.No. 6 6
A.No. 1 1
Size of Filler Metals 0.8 mm 0.8 mm
Weld Metal :
Groove 1.5-24 mm max 1.5-24 mm max
Thickness Range
Fillet ALL ALL
Electrode Flux (Class) NA NA
Flux Trade Name NA NA
Consumable Insert Nil Nil
Other:
Each Base Metal - Filler Metal Combination Should be Recorded Individually
Welding Procedure Specification (WPS)
(ASME SEC-IX QW-482)
TECHNIQUE(QW-410):
Stringe or Weave Bead - String Bead for root and Wavie for filler pass
Orifice or Gas Cup Size - NA
Initial and Interpass Cleaning(Brushing,Grinding,etc.) - Wire Brushing or Grinding or both
After backchip
Final Pass GMAW ER70S6 0.8 DCEN 180-220 20-30 180 -200 mm/min
NAME NAME
DESN. DESN.
DATE DATE
Procedure Qualifiaion Record
(ASME SEC-IX )
Company TECHNO WEIGHSYSTEMS PVT. LTD
JOINTS (QW-402)
Joint Details
FILLER METALS (QW-404) Root & Hotpass Others (Gases) (Mixture) (Flow Rate)
Spec. No. ( SFA ) 5.18 5.18 Sheilding Argon + 'Co2 90%+10% 10-14 LPS
AWS No. (Class) ER70S6 ER70S6 Tracking ----- ------- ------
Filler Metal F. No. 6 6 Backing ----- ----- -----
A. No. 1 1 Purging up to Hot pass -----
Size of Filler Metals 0.8 mm 0.8 mm ELECTRICAL CHARACTERISTICS (QW-409)
Weld Metal thickness 13 mm max Current DC
Others ---- ---- Polarity DCEN
POSITION (QW-405) Tungsten Electrode size NA
Position of Groove 3G
Others : N/A
Weld Progression (uphill/downhill) N/A
TECHNIQUE (QW-410)
N/A
OTHER TESTS Radiography NA Date
TYPE OF TEST Harness Test
Parent Metal (BHN) NA NA NA
Weld (BHN) NA NA NA
HAZ (BHN) NA NA NA
DEPOSIT ANALYSIS N/A
OTHERS N/A
WE CERTIFY THAT THE STATEMENT IN THIS RECORD ARE CORRECT AND TEST WELDS WERE PREPARED
WELDED AND TESTED IN ACCORDANCE WITH THE REQUIREMENTS OF SECTION IX OF ASME CODE.
By :