Professional Documents
Culture Documents
Hamworthy St2a
Hamworthy St2a
Fleets Corner,
Poole,
Dorset,
England, BH17 0JT
Tel: +44 (0)1202 662675 (Direct)
Fax: +44 (0)1202 668793
kkhatami@hamworthy.com
Wastewater should only be piped to the final disinfecting compartment if it is already compliant with the MEPC
effluent standards other than thermotolerant coliforms and the daily & peak quantities allow the residual
disinfectant level in the final compartment to be maintained within the specified tolerance. (3200 L/Day Max).
Electrical Supply: 440 volts, 3 phase, 60 Hz.
MATERIALS:
The tank construction is a welded mild steel fabrication fitted with the required pump[s],
compressor[s] and control panel piped and cabled complete.
CONTROL PANEL:
Auto-Control Panel with IP55 enclosure mounted on unit with contactors for air blower[s] and
discharge pump[s], 110V control circuit transformer, with primary circuit breaker protection,
control circuit fuses and main motor protection circuit breakers.
Remote Connections: Emergency stop, blower running, high level alarm
Indication Lamps: Blower running (green), discharge pump running (green)
To Admarin Shipyard From Kamran Khatami
Attention Osman Vatansever Our Ref E064797 - 1
Your Ref Hull NB14 Cust Acc.
Date 04/06/07 Page No. 2 Of 2
INTERNAL TANK:
Corrosion protection shotblast to SA 2.5 and a minimum of two coats of coal tar epoxy paint to give
a minimum of 250 dry film thickness.
The following equipment is supplied with the Sewage Treatment Plant offered:
One Rotary Vane Air Blower, Electric Motor Driven to aerate and mix through internal fine bubble
diffusers.
* Capacity: 8m³/hr
* Total Head: 18m
* Tank Mounted Calcium Hypochlorite tablet dosing chlorinator - polypropylene/PVC
* 10 Kg drum of hypochlorite tablets for use in chlorinator unit.
PAINT FINISH:-
1 - Tank External - Prime painted only for a final finish by customer
2 - Panel Grey
3 - Blowers Manufacturer's standard
4 - Pump - Cast Iron (plastic coating)
Drive Motor - Manufacturer's Standard colour
Terms: T.B.A
This quotation is subject to our standard terms and conditions of sale, available on request, and is valid for 60 Days.
Best Regards,
Kamran Khatami
For & On Behalf Of HAMWORTHY WATER SYSTEMS LTD
Wastewater Systems
STA Series
Super Trident
Sewage Treatment Unit
The Hamworthy Super Trident sewage treatment plant is the Operating Principle
cost-effective and safe answer to disposing of waste at sea,
maintaining the quality of the world’s oceans. Fully Aeration compartment
compatible with gravity and vacuum collection systems, it Sewage enters this compartment via the soil inlets and a
operates on the activated sludge/suspended aeration system, coarse screen before being thoroughly mixed and aerated by
accelerating natural biological processes to produce a clean, the aerators located at the bottom of the tank.
safe, effluent suitable for discharging at sea. The aerobic bacteria and micro organisms break down the
organic waste material into mainly carbon dioxide, water and
The Super Trident is manufactured, installed and inert material and produce new bacteria cells and organisms.
commissioned working in close co-operation with the world’s This mixture is displaced by incoming sewage into the settling
leading marine waste collection companies and was the first compartment. Air, which provides the oxygen for the bacteria
non-American discharge type marine sanitation device to and micro organisms is supplied by a rotary compressor to the
meet stringent US Coast Guard testing standards. fine bubble aerators which are easily removable through the
side or end of the tank for maintenance.
Standard Features
Inlet for waste water meeting discharge standards a flow through type disinfector. A combined surface skimmer
(on ST2A and above) and outlet weir is situated at the centre
of the settling compartment. This removes any floating debris
Optional Features from the surface of the settling compartment and controls the
Fitted vacuum sewage collection equipment flow of supernatant into the disinfector.
Standby compressor
Disinfection compartment
Standby discharge pump
This section allows time for the disinfectant absorbed by the
Maceration
effluent, to kill any remaining bacteria. The discharge of the
Separate sewage transfer units resulting effluent is controlled by float switches connected to
the discharge pump.
STA Series Wastewater Systems
* UK IMO Certificate
1.
C
1.
B A
1. N.B. ST0A and ST1A have pump and control panel mounted on side
Detailed specification standards. The door of the control cabinet is fitted with a triple
Main tank pole interlocked isolator. A volt free contact is provided for
The main tank consisting of integral aeration, settling and connection to the ship’s main control panel or any indicators or
disinfection chambers is coated with a heavy application of a alarms.
proven finish internally, and with a rust resistant primer externally.
All air pipework and tank connections are supplied as standard. Disinfectant Dispenser
This is of the flow through type in which the effluent flows past a
Aeration system column of specially formulated tablets absorbing the correct
A single rotary air blower is fitted as standard to all units. amount of disinfectant. The process is automatic and requires no
external control equipment. The dosage is controlled automatically
Discharge pump by rate of flow of the effluent, as at higher flow rates more tablets
One or more discharge pumps can be supplied, these being come into contact with the effluent.
suitable for handling the sludge encountered when it is necessary
to empty the tank for periodical inspection. Macerator (optional)
For certain applications such as passenger ships and ferries with
Electric control panel gravity collection or where the sludge is disposed of in an
The electrical controls are housed in a steel enclosure to 1P55 incinerator, a macerator must be fitted in the sewage inlet pipeline.